[RECOVERY]SM-E700F/H/M [TWRP for GALAXY E7]

Search This thread

nepalbiraj

Senior Member
Dec 1, 2014
189
145
Pokhara
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.


Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */


Warning
This recovery will TRIP your Knox Counter and your warranty will be void.knox 0x1 and warranty will be lost. So think again.
This recovery is only for Samsung Galaxy E700
donot install it on any other phones. Installing it on other than mentionned will result in a Brick



Quote:
Disclaimer:
If you have decided to install this recovery on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences you may experience (bricks,.). By installing this custom recovery you lose your phone's warranty.
By installing this, you accept this disclaimer.

>>HOW TO FLASH VIA ODIN:
1)Boot into download mode by pressing volume down,home button and power on button
2)start odin and connect phone with the usb cable
3)put the recovery package in AP or PDA tab.
4)check that only F.reset time and is checked
5)Flash and enjoy.

ISSUES:
-brightness is not yet working


DOWNLOAD:
Only for E7 running kitkat i.e 4.4.4
TWRP FOR E7 kitkat

Only for E7 running lollipop 5.1
TWRP FOR E7 lollipop( IMG)
ODIN FLASHABLE TAR TWRP

Credits:
TWRP: for creating the awesome recovery
@eabz2000 : for help and testing
@Bin.g dallie
@Chaninoza for requesting ;)
@DowneyHere for confirming its working on SM-E700H running 4.4.4. Thanks bro;) @Chaninoza for confirming it on E500H 5.1.1
Press thanks if it boots and was useful to you.


IT HAS BEEN SUCCESSFULLY TESTED ON E700F and E700H RUNNING KITKAT AND LOLLIPOP.FINALLY LOLLIPOP IS SUPPORTED . FOR OTHER VARIANTS I NEED TO GET THE CONFIRMATION.
PLEASE IF YOU INSTALLED AND WORKED SUCCESSFULLY REPLY SO THAT I CAN ADD IT TO THE WORKING LIST.

AND NO MORE BRICKED SCREEN

Do not flash with flashify .I results recoveryloop.

ENJOY THE NEW MATERIAL UI.
 
Last edited:

jackeagle

Forum Moderator- Rec Dev - Dev Relations.
Staff member
  • Apr 11, 2013
    3,384
    9,015
    XDA
    Your thread title says its for E7 and OP Says E500H ??
    E500H/M already have TWRP Recovery long ago hence this can lead to confusions. Kindly correct it to what device you are releasing.
     
    • Like
    Reactions: hacker812c

    nepalbiraj

    Senior Member
    Dec 1, 2014
    189
    145
    Pokhara
    wow! awesome!! gonna try it!

    edit: seems that it's not working, it just shows some king of "bricks" across the screen and it vibrates when i touch it

    Oh seems like its a kernel problem. Tell me your model no. and your android version. I will fix it asap.

    It has been tested on E700F running kitkat 4.4.4. Have to get confirmation on other variants.
     
    Last edited:
    • Like
    Reactions: hacker812c

    adityaupreti

    Senior Member
    Mar 30, 2015
    2,642
    6,889
    Mumbai
    aditheking.github.io
    Kernel sources havent been updated in the opensource site so,I have used prebuilt kernel and dtb.

    You can look through the sources on my github. And you can contribute too. Ask enrique for addition on the group.

    Can u send link
    so i will makw cwm recovery

    I have also made for e5 its on orignal development

    ---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------

    Hmm it is weird. Dont worry I will post the new image once the compilation completes. And can you also post partition table.

    Here is my recovery link http://forum.xda-developers.com/galaxy-e-series/orig-development/recovery-clockworkmod-t3270660
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 16
      Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.


      Code:
      #include 
      /*
       * Your warranty is now void.
       *
       * I am not responsible for bricked devices, dead SD cards,
       * thermonuclear war, or you getting fired because the alarm app failed. Please
       * do some research if you have any concerns about features included in this ROM
       * before flashing it! YOU are choosing to make these modifications, and if
       * you point the finger at me for messing up your device, I will laugh at you.
       */


      Warning
      This recovery will TRIP your Knox Counter and your warranty will be void.knox 0x1 and warranty will be lost. So think again.
      This recovery is only for Samsung Galaxy E700
      donot install it on any other phones. Installing it on other than mentionned will result in a Brick



      Quote:
      Disclaimer:
      If you have decided to install this recovery on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences you may experience (bricks,.). By installing this custom recovery you lose your phone's warranty.
      By installing this, you accept this disclaimer.

      >>HOW TO FLASH VIA ODIN:
      1)Boot into download mode by pressing volume down,home button and power on button
      2)start odin and connect phone with the usb cable
      3)put the recovery package in AP or PDA tab.
      4)check that only F.reset time and is checked
      5)Flash and enjoy.

      ISSUES:
      -brightness is not yet working


      DOWNLOAD:
      Only for E7 running kitkat i.e 4.4.4
      TWRP FOR E7 kitkat

      Only for E7 running lollipop 5.1
      TWRP FOR E7 lollipop( IMG)
      ODIN FLASHABLE TAR TWRP

      Credits:
      TWRP: for creating the awesome recovery
      @eabz2000 : for help and testing
      @Bin.g dallie
      @Chaninoza for requesting ;)
      @DowneyHere for confirming its working on SM-E700H running 4.4.4. Thanks bro;) @Chaninoza for confirming it on E500H 5.1.1
      Press thanks if it boots and was useful to you.


      IT HAS BEEN SUCCESSFULLY TESTED ON E700F and E700H RUNNING KITKAT AND LOLLIPOP.FINALLY LOLLIPOP IS SUPPORTED . FOR OTHER VARIANTS I NEED TO GET THE CONFIRMATION.
      PLEASE IF YOU INSTALLED AND WORKED SUCCESSFULLY REPLY SO THAT I CAN ADD IT TO THE WORKING LIST.

      AND NO MORE BRICKED SCREEN

      Do not flash with flashify .I results recoveryloop.

      ENJOY THE NEW MATERIAL UI.
      4
      yeap its working! will try out for a while, but at least it boots :D

      EDIT: reboot to system its not working, it turns off the phone but nothing to worry

      Good to hear???thanks for testing it out.

      i will look into that. I also noticed that the recovery works best by flashing it with odin so

      i will upload the odin flashable tar later evening. ???
      4
      Thanks working fine on Samsung Galaxy E700H running on KitKat 4.4.4, will be helpful if you create CWM Recovery for E7 running Lollipop 5.1.1!!!
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone