[RECOVERY][SM-P605] Unofficial TWRP 3.5.1 for lt03lte (18.03.2021)

[davidmueller13]

This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!

#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/

This is an unoffical build of TWRP from my device sources. It includes a few fixes for some stuff (see list below).

For further information please check the official TWRP thread in Original Android Development Forum.

Installation:

Important: You have to be on 4.4.2 Bootloader or newer (e.g. with flashing 4.4.2/5.1.1 Firmware via Odin)

Using an existing custom recovery: download zip, TWRP: Install > select zip > swipe
Using Odin: download tar, switch on device in download mode, AP: select tar > start
Using Flashify/Flashfire: Use img


What is working:
-MTP
-Brightness settings
-Vibration
-No delay between recovery and splashscreen
-...

What is not working/bugs:
-You tell me
-...


Download:

IMG

TAR

ZIP

Other builds / AFH


​

Changelog:
20210318: TWRP 3.5.1
20200913: TWRP 3.4.0-0
20190418: TWRP 3.3.0-0
20180923: added unzip (fixes Error64)
20180921: TWRP 3.2.3-0, add support for EFS/Modem backup
20180526: TWRP 3.2.1-0
20170712: first release

Sources:
Kernel:https://github.com/davidmueller13/kernel_samsung_lt03lte_nougat2
TWRP:https://github.com/omnirom/android_bootable_recovery

XDA:DevDB Information
[RECOVERY][SM-P605] Unofficial TWRP 3.4.0-0 for lt03lte, Tool/Utility for the Samsung Galaxy Note 10.1 (2014 Edition)

Contributors
davidmueller13

Version Information
Status: Stable
Stable Release Date: 2020-09-13
Beta Release Date: 2017-07-12

Created 2017-07-12
Last Updated 2020-09-13

 

[mangkon]

Thank you OP!!!
My problem has been resolved!
I will elaborate further when I get back home from current business trip.
Btw, I noticed that the recovery's SEANDROID warning message is now gone, good work!

Edit:
I have installed this recovery by flashing the IMG through v3.0.3 successfully and noted the following changes:-
General result:
When in recovery mode, the "red" warning message of "SEANDROID not enforcing" has been fixed.
Personal:
1. Now, I am able to flash phh's superuser flawlessly without any error message which were the case previously with v2.8.7 -> 3.0.2 and 3.0.3.
2. Now, when my device (with boot.img mod + phh superuser) boot normally, the red SEANDROID warning message is gone too.

 

[Tilagoon]

Thank you for this new release :good:
I was having a problem to convert my cache and data partitions to F2FS as libf2fs.so was missing from your version 3.0.3 and is now included in this version :good:

 

[asusgarb]

This device is the only one where I enabled Adopted Storage, so I don't know if this a common problem. With it enabled I can't flash anything with recovery. Both internal and external SD are not visible or empty, and even if I copy zips into system folder, TWRP doesn't see them. Is there a workaround?

Only solution I found is using a different sd to flash files, but it's complicated and annoying.

Inviato dal mio SM-P605 utilizzando Tapatalk

 

[mangkon]

This device is the only one where I enabled Adopted Storage, so I don't know if this a common problem. With it enabled I can't flash anything with recovery. Both internal and external SD are not visible or empty, and even if I copy zips into system folder, TWRP doesn't see them. Is there a workaround?

Only solution I found is using a different sd to flash files, but it's complicated and annoying.

Inviato dal mio SM-P605 utilizzando Tapatalk

Your problem (adoptable storage is encrypted) might be resolved if you place your ZIP into "the path of" your TWRP's backup folder.
Source: Google Search

 

[itsme_4ucz]

please upload or can anybody

twrp-3.0.3-0-lt03lte_20170206.zip

Best Regards
thanks

 

[Tilagoon]

Hi,
Any specific need for version 3.0.3 ?
There is a new version 3.1.1 by Davidmueller13 which works perfectly :good:
You can have it HERE
You can have version 3.0.3 HERE

 

[asusgarb]

Your problem (adoptable storage is encrypted) might be resolved if you place your ZIP into "the path of" your TWRP's backup folder.
Source: Google Search

I tried it but in recovery the folder appear empty.

Inviato dal mio SM-N9005 utilizzando Tapatalk

 

[mangkon]

I tried it but in recovery the folder appear empty.

Sorry then, just wanted to help when I google and read on its implications, pros and cons.

 

[marcopala]

Everything ok, thanks

I flashed your recovery starting from last 5.1.1 stock. With official 3.1.1.0 I had a loop and I couldn't enter into the recovery but with yours I solved all my issues, thanks. Now my P605 is working well.
Cheers

 

[Israelleite]

DO NOT USE the one on the TWRP website, the latest version is giving bootloop. Use this version 12.206 KB or the version 2.8.7.0 initially !

 

[perapera]

Hi,

Does anyone know if this would work on P600 (n1awifi)?

 

[alex22280]

Hi,

Does anyone know if this would work on P600 (n1awifi)?

No ! This is for p605

 

[panetesan2k6]

Hi!

I flashed this with Odin to my p605 and I am getting the "no command" error. I'm in 5.1.1 stock.

I unticked "auto reboot" in Odin, turned off the tablet and tried to enter recovery but I get the "no command" every time!!

Any advice?

EDIT: My god I forgot to enable developer mode and USB debugging!! Argh. It's working now!

 

[zadox]

SOS !!!
I tried to upgrade TWRP (3.0.x) by flashing the OP's img inside TWRP. Now I get a bootloop: P605 tries to go to recovery, restarts after 1 sec. Can't boot to the system, can't get to download mode and Odin, can't get to recovery. What can I do ?

Luckily, after keeping the power+volume+home buttons for minutes (nothing seemed to be happening, I was getting a reboot every 1 sec after 1st logo and "Booting to recovering" message) and also, in my desperation, starting to press every button randomly I eventually managed to made it to download mode ! I re-downloaded twrp-3.1.1-0-lt03lte_20170712.tar and flashed through Odin at AP. Maybe my previous downloads (had downloaded img for TWRP, tar, and zip) were corrupt or misnamed. The androidfilehost mirrors were too slow, had to download with 10 kbps and had to retry many times to get a valid/verified file.

Everything seems ok now.

 

[Israelleite]

DO NOT USE the one on the TWRP website, the latest version is giving bootloop. Use this version 12.206 KB or the version 2.8.7.0 initially !

YOU DIDN´T READ THIS ?

 

[zadox]

YOU DIDN´T READ THIS ?

I read it but probably misrenamed the files and used the bad version instead or the androidfilehost download was corrupted or something.

 

[Deep Nox]

Does this version save the backup to the external sd card?

 

[Tilagoon]

Does this version save the backup to the external sd card?

Hi,
Yes it does , if you ask it to do so

 

[garniemand]

Hardware issue ?

Dear all,

I was on Oreo and wanted to go back to the nougat version that last was upated beginning of Dec.
I crooked up bc I wanted update first TWRP via the app and stupidly selected the tar.
When I then rebooted the tablet no longer started - unsurprisingly...

Ok - thought no prob as via odin I always can go back to another TWRP - i.e this one.

I no longer get a connection to the tablet - it is not recognised when I am in download mode.
-> cannot flash via odin..

Do I have a prob with the hardware or am I overlooking sth ?

The tablet says the following when in dwnload mode:
Odin mode (in Red)
Product name : SM-P605
Current binary: Custom
System Status: Custom
Knox warranty Void:0x1 (4) )
Qualcomm secure boot: Enable (CSB) - in Grey
AP SWREV: S2, T2, A2, A2, P2 - in Grey
Secure download: Enable - in blue
UDC: Start

and btw - I am doing this via a laptop and I also see a bit of a flickering -> simply not enough juice ?

Tx for any ideas what I might need to do differently ?