[Recovery][T580] Official TWRP for Galaxy Tab A 10.1 WiFi 2016 (gtaxlwifi)
- Thread starter jcadduono
- Start date
Hello
From your samsung tab you need to remove your google accounts like gmail and probably also your samsung accounts. By following the procedure bellow you will be able to check the FRP status.
One application at a time in the procedure:
A) Removing your accounts
SETTINGS > Cloud and accounts > Accounts
From there select a google application and click on [REMOVE ACCOUNT]
B) Checking FRP status
Reboot into samsung download mode and in the upper left-hand corner check the FRP Lock status.
If it's ON then repeat section A) and remove another account.
If it's OFF you'r ready to install TWRP.
Hello
What was the issue and how did you solve it ? Have you made a full backup ? (all partitions)
Thx
Last edited:
I make allways a full backup.
Next time I tried to restore, It works ;I dont know wath was the reason for not working...!!!!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
33Team Win Recovery Project 3.0.2-0
This is for the Exynos WiFi SM-T580 model only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your retailer to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxytaba101wifi2016.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR OBTAINING ROOT
- In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
- Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
- Extract Odin_3.12.3.zip to your computer.
- Install Samsung Mobile Phone Drivers for Odin to find your device.
- Download a .tar image of TWRP for gtaxlwifi.
- Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
- Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
- Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
- At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
- If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
- Go to [Reboot] -> [System].
CHANGES
- v3.0.2-0 - Initial build on twrp.me
FEATURES
- MTP support
- USB Mass Storage support
- Micro SDcard and USB OTG storage support
- f2fs file system support (read, write, format, backup & restore)
- exFAT file system support (read, write, format, backup & restore)
- NTFS file system support (read, write, format)
- ADB root
- Full SELinux support
- Built in android 6.0 tree
KNOWN ISSUES
- Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/jcadduono/android_device_samsung_gtaxlwifi (android-6.0)
Kernel: https://github.com/jcadduono/android_kernel_samsung_exynos7870 (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/17
This may work for you.
Install the zip with TWRP, FORMAT DATA(Not wipe!)
Check DATA can be mounted.
Reboot to TWRP, check DATA is still mountable.
BOOT IMAGE PATCHER
Boot image patcher to remove DM-verity and Forced encryption.
Flash the zip below with TWRP.
This was built by jcadduono not me, so props to him, I just modified it to work for this device and to remove the SEANDROID ENFORCING message.
NOTE: IF YOU INTEND TO ROOT THEN FLASH THIS AFTER SUPERSU.
no-verity-no-encrypt_ashyx
.14Update:
TWRP T580 Oreo build.
Recompiled with source built Oreo kernel and dtb.
T580: https://androidfilehost.com/?fid=11410963190603846502
T585: https://androidfilehost.com/?fid=11410963190603846505
SM-T580XXU4CRJ9_patched_boot - disabled dm-verity, forced encyption disabled, defex security disabled, quota support removed, Selinux permissive.
https://androidfilehost.com/?fid=11410963190603845930
.7
Here you go, all mount issues should be fixed now.
SM-T580
https://androidfilehost.com/?fid=1322778262904016579
SM-T585
https://androidfilehost.com/?fid=1322778262904016592
Thanks.5Thanks for this work!
I managed to flash and boot into TWRP recovery but i have partition problem :
"failed to mount data"
"internal storage is listed as 0MB"
http://imgur.com/a/Ut3S7
http://imgur.com/qDCs9iS
EDIT2: As mentionned by @jcadduono , there is a simpler method than mine :
EDIT3: use@ashyx' patch to remove encryption:
- In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
