[RECOVERY] TWRP 2.5.0.0 - r#3

[acca]

Sounds like you have stock recovery still, I assumed that since you were in this twrp thread that you at least had twrp recovery installed....silly me!! If that's the case you need to start with step 1 installing a custom recovery. And you really should create a new thread over in general help and trouble shooting, that is, after you read up on installing a recovery.

I don't manage to install any recovery, i posted about my problem here :

http://forum.xda-developers.com/showthread.php?p=44518207#post44518207

thanks

 

[cfendrick]

FYI, I installed r#3 and TWRP shows 2.6.0.0 instead of the titled 2.5.0.0

No big deal it works fine just a different version.

Sent from my SM-T310 using Tapatalk 2

 

[loselvis777]

Is there anyway for useing it for the sm-t210?

Sent from my SM-T210 using xda premium

 

[Schemerlamp]

Got my tab3 8". Rooted in 5 minutes. Gave the wife my tab2. Everybody happy

Sent from my SM-T310 using XDA Premium HD app

 

[coolmaddy007]

Teamwin recovery through ODIN passed but still showing custom recovery

Flashed teamwin recovery r#3 on SM-T311 through ODIN and it passed. But when i go into recovery, get No Command signal and then it shows android recovery menu. Plz help.

 

[acca]

Flashed teamwin recovery r#3 on SM-T311 through ODIN and it passed. But when i go into recovery, get No Command signal and then it shows android recovery menu. Plz help.

Hi

Check this thread

 

[coolmaddy007]

Hi

Check this thread

Which thread??

 

[acca]

Which thread??

Oups !
http://forum.xda-developers.com/showthread.php?t=2401815

 

[coolmaddy007]

Thanks..the solution there says to flash stock firmware..
I dont want to mess up things as my Tab3 is just 2 days old..will keep searching..

 

[zedaycee]

Flashed teamwin recovery r#3 on SM-T311 through ODIN and it passed. But when i go into recovery, get No Command signal and then it shows android recovery menu. Plz help.

I had a similar problem. What I did that seemed to work with my tab3 was:

• Flash an older kernel
• TWRP and Root
• Flash the new kernel (if you want to)

Seemed to work fine with my one. I'm using the Australian stock ROM which updated itself when I first turned it on. Flashing an older kernel (which is a lot smaller than having to download the whole rom) seemed to allow TWRP to run.

Unfortunately the Australian stock ROM has been crippled so I ended up switching to the German one which works without any issues at all. The USA rom played silly buggers and refused to connect with my router for some reason.

 

[guest_2011]

Failed install

:crying:

Mistakenly disconnected cable in the middle of running ODIN and loading TWRP. Now can access TWRP but its not completely installed and no way to root. Tried rebooting, reinstalling no luck. Get this error

<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


Should i try to install CWM and will it overwrite my broken TWRP? Would installing an older version of TWRP fix it?

 

[zedaycee]

:crying:

Mistakenly disconnected cable in the middle of running ODIN and loading TWRP. Now can access TWRP but its not completely installed and no way to root. Tried rebooting, reinstalling no luck. Get this error

<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


Should i try to install CWM and will it overwrite my broken TWRP? Would installing an older version of TWRP fix it?

I'd return to stock first then start the whole TWRP process again.

 

[guest_2011]

I'd return to stock first then start the whole TWRP process again.

You mean do a reset? I didn't think of that. Will try. Tx.

 

[zedaycee]

You mean do a reset? I didn't think of that. Will try. Tx.

Actually flash the stock rom via ODIN to get the tab back to its original state then try doing TWRP again.

 

[guest_2011]

Actually flash the stock rom via ODIN to get the tab back to its original state then try doing TWRP again.

oh .... its the only way to fix it? Can someone link me to the original ROM for usa if they different? Tab 3 8.0 wifi only.

 

[zedaycee]

oh .... its the only way to fix it? Can someone link me to the original ROM for usa if they different? Tab 3 8.0 wifi only.

Don't know if it's the only way to fix it but it should fix it. Maybe reflashing TWRP without going to stock might work but if not going to stock should fix it. You can get the rom from samsung-updates.com I think.

 

[zibbi3]

Links are down can someone upload them please, thanks in advance.

Verstuurd vanaf mijn SM-T310 met Tapatalk 4

 

[anielkumar]

Link Down - Plz Upload TWRP_T31x_r3.tar file

Someone Please Upload TWRP_T31x_r3.tar file.
Thanks in Advance

 

[arshull]

Someone Please Upload TWRP_T31x_r3.tar file.
Thanks in Advance

http://www.mediafire.com/download/643p536ev8u0y9b/TWRP_T31x_r3.tar





Sent from my SGH-I747 using xda app-developers app

 

[B.R.A]

whether the flashing TWRP will add binary counter like other samsung devices?, and whether there is a way to reset it?


I am employing google translate! LOL