[RECOVERY][TWRP 3.0.2-0]TWRP Recovery for Samsung Galaxy J5 (2015)

[gigis50]

It's because you're using a custom recovery, ignore it.

I would like to, but it keeps restarting to same thing. And the screen goes as you can see in the image attached

 

[American_Jesus]

I would like to, but it keeps restarting to same thing.

Did you flash Lollipop before installing this recover.
Also unlock the bootloader in developer options.

 

[gigis50]

It had stock Marshmallow and i "Unlock OEM" from developer options to bypass FRP Lock, flashed this with ODIN, then flashed a custom ROM and gapps. Seemed to be working ok, but it does only this...

 

[Demicro]

I get that "Recovery is not Seandroid Enforcing" after flashing this recovery

It's because the recovery need this

echo -n "SEANDROIDENFORCE" >> recovery.img

To disable the warning "red label"

 

[gigis50]

It's because the recovery need this

echo -n "SEANDROIDENFORCE" >> recovery.img

Teach me more captain

 

[American_Jesus]

It's because the recovery need this

echo -n "SEANDROIDENFORCE" >> recovery.img

To disable the warning "red label"

I'm getting noob on Windows, echo works that way on Windows!?

People who don't use UNIX systems that can be a little hard

 

[gigis50]

I'm getting noob on Windows, echo works that way on Windows!?

People who don't use UNIX systems that can be a little hard

I don't even know what that command is for, but... Windows here too

 

[American_Jesus]

I don't even know what that command is for, but... Windows here too

echo displays a line

echo "hello world"

Using >> redirected the output to the last line of a file, in this case recover.img. but on Windows echo can have different opinions!

 

[gigis50]

echo displays a line

echo "hello world"

Using >> redirected the output to the last line of a file, in this case recover.img. but on Windows echo can have different opinions!

Bro,

I'm a noob, teach me from the bottom... Where do i insert that command?

 

[ashyx]

I would like to, but it keeps restarting to same thing. And the screen goes as you can see in the image attached

You need to be more specific. Which device model do you have?
If the recovery is not booting then it's either not compatible or needs a kernel update.

 

[#Henkate]

It had stock Marshmallow and i "Unlock OEM" from developer options to bypass FRP Lock, flashed this with ODIN, then flashed a custom ROM and gapps. Seemed to be working ok, but it does only this...

This TWRP is for Lollipop.

If you are on Marshmallow, you have to downgrade to Lollipop and then flash this recovery and the custom rom you want.

The green screen occurs when you are flashing Lollipop TWRP / ROM when you are on Marshmallow or vice versa.

 

[gigis50]

It's a J500FN. I've tried something else, trying to try what you said. I've tried to flash stock lollipop with odin and i received an error with ext4 something, too large for... And i wanted to go back to recovery to wipe all and try again, and it booted into cm13. Well at least, it's stuck at the CM logo, i`ll just leave it a bit, to see if it boots till the end. If not, i'm gonna wipe all and install stock lollipop again and try what you said.

 

[Demicro]

I don't even know what that command is for, but... Windows here too

On windows you have to use cygwin terminal

If the recovery was compile with marshmallow source code you don't need to downgrade.

Remember to use >> no one or you will get an empty recovery.img "0 mb"

 

[American_Jesus]

On windows you have to use cygwin terminal

If the recovery was compile with marshmallow source code you don't need to downgrade.

Remember to use >> no one or you will get an empty recovery.img "0 mb"

Install cygwin just to use echo!
There's simpler ways to do that

 

[Demicro]

Install cygwin just to use echo!
There's simpler ways to do that

? Android terminal
I will not download all the recovery just to add that. These are things that should be done before sharing them

 

[Demicro]

It had stock Marshmallow and i "Unlock OEM" from developer options to bypass FRP Lock, flashed this with ODIN, then flashed a custom ROM and gapps. Seemed to be working ok, but it does only this...

Before flash the custom rom have you tried to see if you boot the stock rom?
With twrp

 

[Sehab084]

Does the MTP work?

 

[schlombie]

I tried to flash the recovery on my SM-J500FN. Everything's looks good at odin, but after a boot into recovery I saw only the Samsung logo, a small brown line at the screen and the display fading to brown! Newer saw such effect. Does anybody now what's wrong here?

Gesendet von meinem SM-G900T mit Tapatalk

---------- Post added at 17:57 ---------- Previous post was at 17:50 ----------

I tried to flash the recovery on my SM-J500FN. Everything's looks good at odin, but after a boot into recovery I saw only the Samsung logo, a small brown line at the screen and the display fading to brown! Newer saw such effect. Does anybody now what's wrong here?

Gesendet von meinem SM-G900T mit Tapatalk

OK, seems I need lollipop! [emoji13]
Will try.

Gesendet von meinem SM-G900T mit Tapatalk

 

[#Henkate]

Does the MTP work?

Yes.

I tried to flash the recovery on my SM-J500FN. Everything's looks good at odin, but after a boot into recovery I saw only the Samsung logo, a small brown line at the screen and the display fading to brown! Newer saw such effect. Does anybody now what's wrong here?

Gesendet von meinem SM-G900T mit Tapatalk

---------- Post added at 17:57 ---------- Previous post was at 17:50 ----------


OK, seems I need lollipop! [emoji13]
Will try.

Gesendet von meinem SM-G900T mit Tapatalk

Yep, you need lollipop.

If you want TWRP for MM, you can find it HERE.

 

[schlombie]

To late! Flash done. It works and device was now on nougat.

Gesendet von meinem SM-G900T mit Tapatalk