[Recovery] TWRP 3.0.2-1 for P9000 Lite

[megthebest]

Multilanguage TWRP 3.0.2-1 for P9000 Lite with more than 10 languages!

Tested With LAST ROM 20160422

known bugs:

- Battery percentage is fixed at 50%



Download and Install correctly Mediatek Preloader drivers before using Flashtool

( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install

https://www.youtube.com/watch?v=50pD0mONm44

http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/

https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/


1- With flashtool load MT6755_Android_Scatter-TWRP.txt

2- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.

To restore original stock recovery, you need load ad point 1 the file MT6755_Android_Scatter.txt

P.S after flashing, enter immediately in TWRP at boot using POWER and VOL + keys at the same time untile Logo

To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/921/SuperSU

XDA:DevDB Information
TWRP 3.0.2-1 for P9000 Lite, ROM for the Elephone P9000

Contributors
megthebest, Jemmini, Hanuma50
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Tested on P9000 Lite version 20160422

Version Information
Status: Testing

Created 2016-04-25
Last Updated 2016-04-25

 

[Jtig]

Thanks, this worked fine. I used Elephone's provided SU though.

 

[bojan87]

So i installed drivers, started flashtool, put recovery file, and only check recovery, pressed download, and connected my phone to usb, and i got this massage

So it wont work

What did i do wrong

Thanks!

 

[megthebest]

So i installed drivers, started flashtool, put recovery file, and only check recovery, pressed download, and connected my phone to usb, and i got this massage

So it wont work

What did i do wrong

Thanks!

Drivers not correctly installed.
Please take care on Windows 10 or 8.1 drivers signature disable before install drivers.
Connect the phone switched off, after you push download in flashtool.
It works fine in all P9000 lite, nit mediatek drivers are always the big step to do..

Sent by Mi5 64Gb

 

[bojan87]

I disable signature and installed drivers. I checked and USB driver was on, but when i tried to flash i always got this. Maybe it is problem because i upgraded phone to newest SW?

 

[Jtig]

I had exactly the same problem, however, i hadn't updated my drivers since the times i used to flash my P2000... So, i disabled the drivers verification and followed the guide from the guides page and it worked fine

 

[ikostas_1]

is it working for p9000??? (meaning not lite)

 

[megthebest]

is it working for p9000??? (meaning not lite)

not tested yet.. and not assured..
i guess it doesn't work on big brother P9000

 

[vsrookie]

not tested yet.. and not assured..
i guess it doesn't work on big brother P9000

Look here. This worked for me.
http://forum.xda-developers.com/showthread.php?p=66375778
But don't know if it is the same TWRP.

Greetings
Vsrookie

Sent from my P9000 using XDA-Developers mobile app

 

[megthebest]

Look here. This worked for me.
http://forum.xda-developers.com/showthread.php?p=66375778
But don't know if it is the same TWRP.

Greetings
Vsrookie

Sent from my P9000 using XDA-Developers mobile app

i know.. is not the same and also P9000 TWRP doesn't work on P9000 Lite so far

so like the title said, use my TWRP only on P9000 Lite :good:

 

[Fabaure]

Hello I did everything in order, when I plug the phone, a window opens flashtools to stop functioning

 

[megthebest]

Hello I did everything in order, when I plug the phone, a window opens flashtools to stop functioning

Take care and install correctly mediatek preloader driver under Windows (if 8.1 or 10 you nees to disable driver signature before installing them).
Please use also flashtool 64 bit 5.1604 or newer, the one linked is 32bit version

Sent by Mi5 64Gb

 

[TeenModding24D]

How do I get twrp on my p9000 lite on 2016810 ROM this doesn't work

 

[Martiz]

Cm13 here: TWRP works good!

 

[pigdogs]

Hi,
I have a P9000 lite which I have updated to latest version 20160810. I can flash the recovery and it seems to go OK with no errors. However, when I try to enter the TWRP recovery mode - ( up and power) it wont go in I see the screen flash, like its going to, but it just boots up normally. Is there an updated version that works with the latest stock rom or will I have to roll back version ( which seems not as good on batteries and not so good on GPS) to be able to root the phone? I am wondering if the last update has locked the recovery mode or something?