[RECOVERY][TWRP 3.3.0][7.0/8.1/9.0] Galaxy J5 (2017) [17.04.2019]

Status
Not open for further replies.
Search This thread

ananjaser1211

Recognized Developer / Recognized Contributor
  • Ae08b8N.png

    Unofficial TWRP 3.3.0 For J5 2017
    Disclaimer
    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this recovery before flashing it!
    YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.


    Special features:
    Code:
    - built from Pie kernel source
    - built in full 64bit mode
    - updated TWRP source to 3.3
    - Full F2FS Support
    - fully compatible with all Oreo roms

    Downloads:
    Instructions:
    Odin
    1. Download Odin v3.13.1
    2. Download and install Samsung Drivers (if you have them installed you can skip this step)
    3. Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
    4. Download TWRP_*.tar
    5. Switch off the phone
    6. Use Home+Volume Down+Power to enter Download Mode and connect the device to usb
    7. Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
    8. Put TWRP_*.tar.md5 file into AP tab
    9. Click Start
    10. When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Home" + "Vol. Down" + "Power" buttons until the downoad mode disappears
    11. At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Home" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
    12. If it didn`t worked, redo the steps from #1 more careful this time.
    TWRP
    • Download TWRP_*.img, push it into phone storage, choose install image in your current recovery, navigate to downloaded *.img file, select it, select to flash as recovery.
    Optional - Download and flash no-verity-opt-encrypt-6.0 zip to disable data partition encryption
    If for any reason you fail to install TWRP multiple times/different methods, make sure you check this thread

    Sources:
    • J530x device tree - https://github.com/omnirom/android_bootable_recovery
    Credits:
    XDA:DevDB Information
    TWRP_J530, Tool/Utility for the Samsung Galaxy J5

    Contributors
    ananjaser1211, corsicanu
    Source Code: https://github.com/ananjaser1211/android_device_samsung_jxy17lte


    Version Information
    Status: Stable
    Current Stable Version: V2.0
    Stable Release Date: 2019-04-17

    Created 2017-12-31
    Last Updated 2019-04-17
     
    Last edited:

    Abdullah_a86

    Senior Member
    Jan 21, 2016
    57
    45
    --Encyrption---
    Now you need to disable samsung encryption otherwise you will have a bad time
    Format Data partition using FORMAT DATA button under Wipe options. (Note: This will wipe the internal storage)
    Flash Latest MAGISK Version OR Any J530 Custom Kernel (To disable DM-Verity/encryption)
    Magisk : Official Thread
    Reboot and setup your Phone.
    Happy flashing !

    i have root form Magisk befor and old TWRP

    and Just only update TWRP in Odin and work fine
     

    ananjaser1211

    Recognized Developer / Recognized Contributor
  • Last edited:
    • Like
    Reactions: armando-martin
    Aug 23, 2015
    9
    5
    the version for J530GM is installed and it does not start twrp starts the phone,
    the version for J530G is installed if it starts twrp and it works MTP does not mount data, mount system, and does not detect internal memory of the phone.

    my phone version J530GM
     
    • Like
    Reactions: ananjaser1211

    ananjaser1211

    Recognized Developer / Recognized Contributor
  • the version for J530GM is installed and it does not start twrp starts the phone,
    the version for J530G is installed if it starts twrp and it works MTP does not mount data, mount system, and does not detect internal memory of the phone.

    my phone version J530GM

    You need to wipe internal storage and flash Magisk most probably
     
    Status
    Not open for further replies.

    Top Liked Posts

    • There are no posts matching your filters.
    • 33
      Ae08b8N.png

      Unofficial TWRP 3.3.0 For J5 2017
      Disclaimer
      I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
      Please do some research if you have any concerns about features included in this recovery before flashing it!
      YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.


      Special features:
      Code:
      - built from Pie kernel source
      - built in full 64bit mode
      - updated TWRP source to 3.3
      - Full F2FS Support
      - fully compatible with all Oreo roms

      Downloads:
      Instructions:
      Odin
      1. Download Odin v3.13.1
      2. Download and install Samsung Drivers (if you have them installed you can skip this step)
      3. Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
      4. Download TWRP_*.tar
      5. Switch off the phone
      6. Use Home+Volume Down+Power to enter Download Mode and connect the device to usb
      7. Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
      8. Put TWRP_*.tar.md5 file into AP tab
      9. Click Start
      10. When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Home" + "Vol. Down" + "Power" buttons until the downoad mode disappears
      11. At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Home" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
      12. If it didn`t worked, redo the steps from #1 more careful this time.
      TWRP
      • Download TWRP_*.img, push it into phone storage, choose install image in your current recovery, navigate to downloaded *.img file, select it, select to flash as recovery.
      Optional - Download and flash no-verity-opt-encrypt-6.0 zip to disable data partition encryption
      If for any reason you fail to install TWRP multiple times/different methods, make sure you check this thread

      Sources:
      • J530x device tree - https://github.com/omnirom/android_bootable_recovery
      Credits:
      XDA:DevDB Information
      TWRP_J530, Tool/Utility for the Samsung Galaxy J5

      Contributors
      ananjaser1211, corsicanu
      Source Code: https://github.com/ananjaser1211/android_device_samsung_jxy17lte


      Version Information
      Status: Stable
      Current Stable Version: V2.0
      Stable Release Date: 2019-04-17

      Created 2017-12-31
      Last Updated 2019-04-17
      7
      Twrp 3.2.3 update

      https%3A%2F%2Fcdn.goandroid.co.in%2Fwp-content%2Fuploads%2F2017%2F10%2Funnamed-2.png

      GALAXY J5 Pro (2017) TeamWinRecoveryProject

      Updated TWRP 3.2.3.0 for J530F/FM/G/GM/S/L/K/Y/YM​

      • Based on New TWRP Tree (TWRPBuilder)
      • ARM64 Recovery (2GB+Zip)
      • Working MTP (Windows/Linux)
      • Propper System Mount/unmount
      • EFS/Radio Backup enabled
      • Aroma Support
      • Disabled RED Debug Text
      • Adjusted Partition Sizes

      J530 TWRP DEVICE TREE : Github

      Download : GoogleDrive

      Thanks to TWRPBuilder contributors and a5y17lte tree
      @corsicanu
      @Dyneteve
      @yshalsager
      6
      3.3

      https%3A%2F%2Fi.imgur.com%2FAe08b8N.png


      TWRP 3.3.0 Based on Omni-7.1 for j5y17lte (Galaxy J5 2017)​

      Supports all J530 Models

      J5 Tree change-log :-

      Fixed ADB
      Full F2FS Support added
      3.18.91 Kernel
      Pie based
      Disabled all security
      Quota enabled
      CPEFS/MKEFS123 Backup added

      TWRP 3.3.0 Change-log :-

      Merge AOSP 9.0 r3 (Dees_Troy)
      Use ANDROID_ROOT variable instead of hard coding to /system (CaptainThrowback)
      Decrypt FBE on 9.0 and metadata decrypt (Dees_Troy)
      vold decrypt updates (CaptainThrowback and nijel8)
      Support vibration on LED class devices (notsyncing)
      Metadata decrypt support for Pixel 3 (Dees_Troy)
      Support rotating the display via build flag (vladimiroltean)
      Reboot to EDL mode button (mauronofrio)
      Support MTP on FFS devices (bigbiff)
      Update FDE decrypt to support keymaster 3 and 4 (Dees_Troy)
      Detect mkfs.f2fs version to properly format on f2fs partitions (Dees_Troy)
      Allow TWRP to use md5 and sha256 checksums for zip installs (bigbiff)
      TWRP can use /data/cache/recovery and /persist/cache/recovery on AB devices with no cache partition (bigbiff)
      Switch part of advanced menus in TWRP to use a listbox of options (Dees_Troy)
      Use magiskboot to allow repacking boot images for installing TWRP (Dees_Troy with thanks to topjohnwu of course)

      P.S : this has been compiled with the 7.1 Omni source. and is compatible with 8.1 Omni source and possible 9.0.
      at the moment this is the source i have available.

      Downloads : J530X
      5
      TWRP 3.2.1.0

      TWRP 3.2.1.0 Download ----

      J530F : GoogleDrive | Github Release
      J530G : GoogleDrive | Github Release
      J530GM : GoogleDrive | Github Release
      J530Y : GoogleDrive | Github Release
      J530YM : GoogleDrive | Github Release
      4
      Reserved

      Reserved
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone