Flash this recovery if you want, it's old though.
Use the one by Nick, but Vince's official twrp is the best and the latest...
Flash this recovery if you want, it's old though.
Use the one by Nick, but Vince's official twrp is the best and the latest...
thanks
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
thankkkkkkkkkkkkkks
:angel:
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
thankkkkkkkkkkkkkks
:angel:every time I try my phone screen slowly turns green, it worked with twrp 3.1.0-0 but that's what happens
have got a SM-J500FN
have got a SM-J500FN
This one is too old mate. 3.1.0 is supposed to be better. But I suggest u to use the official TWRP for j5 by Vince or TWRP Pro by Riofebrian
Thanks, I was trying to get a custom rom & it wasn't working on 3.1.0 (kept freezing) but I found a modded version of 3.1.0 that worked and installed the rom no problem
Brightness slider bug ,install lineage recovery than flash this one , Brightness slider is gone
https://xdaforums.com/galaxy-j5/development/recovery-recovery-pro-galaxy-j5-2015-t3728264
Works with both LP and MM BL per OP
Similar threads
- Locked
- Poll
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
41
TWRP 2.8.7.0 for the Samsung Galaxy J5
Hey everyone. I have decided to build TWRP recovery for the Galaxy J5.
First I would love to thank @bhattjunaid for testing this since I don't own this device, @celta1976 For managing to get this working on Locked bootloader models and his Instructions (Instructions In 1st Comment of the post), @serdotlinecho For the instructions how to fix Bootloop into TWRP (Instructions in 1st Comment of the post) and TeamWin for the amazing sources that are still supported.
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE EVEN THOUGH NOTHING SHOULD GO WRONG IF YOU DO EVERYTHING RIGHT! KNOX WILL BE TRIPPED. ALSO... I AM NOT RESPONSIBLE FOR WW3 OR A ZOMBIE OUTBREAK
Ok, Now to the interesting part
Already tested on:
- Galaxy J500F Working
- Galaxy J500H Working
- Galaxy J5008 Working - Instructions in 1st post of this thread! - (Locked bootloader)
- Galaxy J5007 Not tested yet
- Galaxy J500G Working
- Galaxy J500M Working
- Galaxy J500N0 Not tested yet
- Galaxy J500FN Working
- Galaxy J500Y Not tested yet
Note : This should work on all models. However, just to be sure, if you own a J5 model that has not been tested yet, please post a confirmation below
Bugs
Changelog
Screenshots
Instructions
Download
Source code : https://github.com/TWRP-J5
Have fun!11Instructions for specific models
1. How to flash TWRP with locked bootloader by @celta1976
2. How to fix TWRP bootloop (Device restarts into TWRP every time) by @serdotlinecho
1. Instruction for Locked Bootloader Models by @celta1976
1. Download CROM Services, file .apk here : http://xdaforums.com/showpost.php?p=60204006&postcount=5 and install it. Then execute it on the phone.
2. Next up flash this file via odin : https://download.chainfire.eu/718/CF...xx-sme500h.zip
And finally, install TWRP !!
2. How to fix TWRP bootloop by @serdotlinecho
If your TWRP is bootlooping please do the following :
1. Go to sammobile and download the stock Firmware and extract the zip
2. Put your phone into download mode
3. Connect your phone with your pc
4. Open odin and select PDA on older versions or AP on newer versions.
5. Select the stock firmware
6. Click start and wait until its done.
7. Re-flash TWRP.
8. Now you should be able to boot into TWRP and system5Since this is the most popular thread regarding J5, i'm sharing this here
I've made this custom rom: Stock ROM Advanced .Please read the whole thread and share it, so more people will know about it.5-Status about CM-
Hey, some of you have been asking if a AOSP based rom will ever come out or if I will ever make one for this device. I've tried this device a few times in my hand (mostly in samsung stores etc.) and find that is actually has quite some potential. Not only design wise but performance wise. Talking about performance. It uses the SD 410 right? Luckily enough many phones, including samsung phones with the SD 410 have CM roms and we all know how much advantage there is when working with snapdragon because of it's open source contributions. However here are the circumstances I would need to even start ROM development for this device.
1. I need to warn you that I am doing absolutely no promise here. One of my weaknesses on XDA has been that I promised too many things that would later result a fail, leaving too many users behind that were hoping for something.
2. I will only start the project when I have time for it. Usually "I don't have time for it" sounds allot like your every day excuse when you're too lazy to do something but in this case i'm too busy with other devices at the moment (Galaxy Tab S2 and S5 mini).
3. I would need to own the device. I've had enough experience trying to build a ROM without having the device and believe me... it's nearly impossible. Now there are following options : 1. Funding together donations so I can buy the device myself. 2. Ship me the device if you live near.
Be aware that I cannot ever guarrantee that the ROM will function bug free and stable.
So to make it clear, I am still too busy with other devices at the moment. However if i'm free, I believe a CM port will work on this device fairly well. I will notice you when I have time and maybe then we can talk again.5
Hello! I've made an rom like 1 week ago: Stock ROM Advanced. About Samsung music, it will come in next version
Hello! I have a github, however my rom is not built from sources, it is based on stock rom.
I didn't know that kernel can be modified to support more fingers, but it should be related to hardware.
I want to make an custom kernel as well, and I lack in knowledge too. But there are guides... it still hard though.
There is an github regarding cm for J5: https://github.com/Galaxy-J5 . But it haven't been updated for a while.
