• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][TWRP][J510][ROOT] TWRP 3.0.2 for Samsung Galaxy J5(2016)

Status
Not open for further replies.
Search This thread

wowanbelousov

Senior Member
Jan 25, 2013
172
243
Luhansk
TWRP 3.0.2 for Samsung Galaxy [email protected] J5(2016)​
Description:
Bugs
- Brightness slider
- PC mounting MTP (but adb should work)

__________________________________________________________________________________________________
INSTALLATION(Instructions)
Code:
1. Install device usb drivers and Odin 
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin  as an administrator, connect the device to a usb port, 
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
Many thanks vaibhavpandeyvpz!:good:
Tested model SM- J510H(FN)@ J5(2016) for other models not yet verified

ROOT J510 ( tested model J510H / J510FN / J510F / J510GN )

Flash zip SU
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
___________________________________________________________________________________
Ver / TWRP 2.8.7.0 fix
http://forum.xda-developers.com/showpost.php?p=68624038&postcount=28
 

Attachments

  • TWRP_3.0.2_SM_J510H.tar
    13 MB · Views: 164,091
Last edited:

wowanbelousov

Senior Member
Jan 25, 2013
172
243
Luhansk
Got Root !::good:
All thanks vaibhavpandeyvpz!!!:good:
 

Attachments

  • Screenshot_20150101-190915.png
    Screenshot_20150101-190915.png
    101.5 KB · Views: 7,947
Last edited:

andre6b

Member
Oct 29, 2006
28
2
Hi guys,

Just tried it on SM-J510GN, but flash failed:

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?
 

Yuen.Jason22

Senior Member
Sep 22, 2013
445
178
Hong Kong
Hi guys,

Just tried it on SM-J510GN, but flash failed:

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!


On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?

Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better :eek:
 

Yuen.Jason22

Senior Member
Sep 22, 2013
445
178
Hong Kong
It was off! Well, thanks, will retry now :)

---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------

By the way, will Samsung's updates still work after rooting?

OTA updates probably won't, I guess :(
If you have already flashed TWRP recovery, then KNOX counter would have been triggered and no updates and warranty from Samsung. :crying:

But you can always flash new Samsung firmwares via Odin :)

just go to Samsung firmwares website and search for your model number and download the new updates manually
 

avicohh

Senior Member
Dec 8, 2009
369
1,097
Modiin
iandroid.co.il
Hi
There is some bug in this recovery,
After I install it, when I tried to make a factory reset from the settings, the phone keep booting to recovery again and agian after the wipe. even if i choose reboot>system in twrp it keep rebooting into recovery, until I flashed the stock recovery again.
Can you fix this problem please? my device is J510FN.
Thank you very much!
 
  • Like
Reactions: LNMH

Huee

Member
Dec 21, 2010
31
0
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me :D . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?
 
Last edited:

Yuen.Jason22

Senior Member
Sep 22, 2013
445
178
Hong Kong
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me :D . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?

Once you tripped KNOX to 0x1, it would be recorded at a E-Fuse which permanently marked that you have void the warranty. Samsung customer service centres would refuse to repair your device
 

suhailr323

Member
Apr 10, 2014
26
4
Srinagar
facebook.com
I tried this methid and installed recovery image sucessfully. But after flashing Superuser.zip my phone stuck on Samsung logo. My model is J510FN. What may cause the problem. Any help is apprciated.

---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------

Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).
Tried it all. Stuck on Samsung Animation after flashing superuser.zip
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 31
    TWRP 3.0.2 for Samsung Galaxy [email protected] J5(2016)​
    Description:
    Bugs
    - Brightness slider
    - PC mounting MTP (but adb should work)

    __________________________________________________________________________________________________
    INSTALLATION(Instructions)
    Code:
    1. Install device usb drivers and Odin 
    2. Power off the device.
    3. Boot to download mode (VOLUME DOWN/HOME/POWER).
    4. Volume UP once.
    5. Open Odin  as an administrator, connect the device to a usb port, 
    and make sure a blue button appears and says "Added" in description on the left.
    6. Select AP or PDA for older Odin and search for the downloaded tar file.
    7. Uncheck auto reboot from the second tab.
    8. Start flash and you should see the succeeded command.
    9. Unplug the device and long press POWER until it powers off or remove the battery.
    10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
    Many thanks vaibhavpandeyvpz!:good:
    Tested model SM- J510H(FN)@ J5(2016) for other models not yet verified

    ROOT J510 ( tested model J510H / J510FN / J510F / J510GN )

    Flash zip SU
    https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
    ___________________________________________________________________________________
    Ver / TWRP 2.8.7.0 fix
    http://forum.xda-developers.com/showpost.php?p=68624038&postcount=28
    18
    TWRP ver. 2.8.7.0 / TWRP J510(F/H/FN/M/G/Y/N):good:
    Fix : No error with third-party reboot ,
    Fix : is a combination of MTP (in recovery mode)
    Thank you jemmini
    Additional questions do not ask because I do not have to hand this unit Thank you and good luck
    3
    Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).

    Sent from my SM-J510GN using XDA-Developers mobile app
    3
    Got Root !::good:
    All thanks vaibhavpandeyvpz!!!:good:
    2
    Me too.
    Got Root access on SM-J510GN. Thanks for the great work!
    2ed7fvq.jpg