[RECOVERY][TWRP][UNOFFICIAL] TWRP 3.6.0 for UMIDIGI A5 Pro [MT6763]

Search This thread

Hadenix

Senior Member
twrp.jpg


Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Prerequisites
1. Unlocked bootloader.

Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery TWRP_Hadenix-A5Pro.img
BooM ! TWRP flashed successfully.

6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.

Enjoy !

XDA:DevDB Information
TWRP Recovery, Tool/Utility for the Umidigi A5 Pro


Contributors
kiruha_21, TeamReloaded

Version Information
ROM OS Version:
9.0 Pie
Status: Stable
Based On: TWRP
Current Stable Version: 3.6.0_11

Downloads: TWRP_by_Hadenix

SUPPORT:
Unofficial Telegram Channel
 

Attachments

  • Screenshot_2009-12-31-18-23-06.png
    Screenshot_2009-12-31-18-23-06.png
    76.2 KB · Views: 2,925
  • Screenshot_2009-12-31-18-24-39.png
    Screenshot_2009-12-31-18-24-39.png
    197.5 KB · Views: 2,916
Last edited:

Hadenix

Senior Member
- At the first start it will ask you to Enter a password, press the back button.
- So that we have access to the internal memory, the recovery will not be overwritten - We put it through TWRP Attached file Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip (4.16 MB)
(the file must be put in advance on an external flash card)
- Go to CLEAN - Format Data. Write yes and click the checkmark on the right. ALL DATA WILL BE DESTROYED and the phone will return to the factory state
- We reboot into the system, the next time you enter the recovery, access to the internal memory will be.
 
  • Like
Reactions: edcoolio

DEORYZE

Member
Aug 17, 2019
12
0
Mpm1SIk20A0.jpg


Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Prerequisites
1. Unlocked bootloader.

Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery TWRP_Hadenix-A5Pro.img
BooM ! TWRP flashed successfully.

6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.

Enjoy !

XDA:DevDB Information
TWRP Recovery, Tool/Utility for the Umidigi A5 Pro


Contributors
kiruha_21, TeamReloaded


Version Information
ROM OS Version: 9.0 Pie
Status: Stable
Based On: TWRP
Current Stable Version: 3.3x

Downloads: TWRP_by_Hadenix

SUPPORT:
Unofficial Telegram Channel

I did everything you said but when i hold Vol- and power button at the same time, there is a boot loop until i let go and then it will boot normally. TWRP doesn't boot. Help please.
 

edcoolio

Member
Jan 22, 2015
31
11
Miami
FYI

I wanted to chime in and say that all your efforts are greatly appreciated!!!

Hopefully, we will have some good, fully functional ROM in the near future with a good camera app. Keep up the good work.



20-08-19
- Corrections of architecture, correction at assembly
- recovery.fstab is updated
- Synchronization with source codes
 
  • Like
Reactions: Hadenix

Majortwild

New member
Sep 13, 2019
4
0
Cant boot into twrp

Cant boot into twrp i did all i have unlock bootloader but tried all possible way to boot it but i cant
 

chooks06

Senior Member
Jan 12, 2015
1,090
372
singapore
I still cant boot into twrp i did all he said nothing bro


Ok bro pls can u Give me full Guide how to Root my device With ur steps pls Because my steps cant work it jst cant boot into twrp


Bros, I haven't tried installing this recovery yet. But if you've followed OP's guide to flash, after powering down, try holding vol UP + POWER. You should see a black screen with small fonts.

Use VOL UP to navigate, VOL DOWN to select.

If you select recovery and see the usual recovery, use VOL UP or DOWN to navigate, POWER to select, in which case it means that TWRP was not installed.

Not sure if this will work for you but I hope it helps.

Edit..
@kiruha_21 - to get to recovery/fastboot/normal screen, it should be back VOL UP (+) and POWER. First post mentioned VOL (-). Maybe I'm wrong. If I am, my apologies.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    twrp.jpg


    Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    Prerequisites
    1. Unlocked bootloader.

    Instructions
    1. Go to the fastboot mode.
    2. Download the recovery.img and transfer it to the adb folder.
    3. Open the cmd/terminal and change directory into the adb folder.
    4. Now confirm/check that device is connected by typing:-
    Code:
    fastboot devices
    If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
    After that we will flash this TWRP recovery to the recovery partition by below command:-
    Code:
    fastboot flash recovery TWRP_Hadenix-A5Pro.img
    BooM ! TWRP flashed successfully.

    6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.

    Enjoy !

    XDA:DevDB Information
    TWRP Recovery, Tool/Utility for the Umidigi A5 Pro


    Contributors
    kiruha_21, TeamReloaded

    Version Information
    ROM OS Version:
    9.0 Pie
    Status: Stable
    Based On: TWRP
    Current Stable Version: 3.6.0_11

    Downloads: TWRP_by_Hadenix

    SUPPORT:
    Unofficial Telegram Channel
    2
    - Amendments to recovery.fstab. List of sections returned to stock
    - Cleared the excess in the tree
    - Added new flags for assembly
    - init.recovery.mt6763.rc fixed
    - ADB now works
    - Updated source to 9.0.0 r47
    - zImage from firmware 1.4
    - Added to the recovery_dtbo.img assembly from firmware 1.4
    - And much more
    2
    TWRP_3.3.1_20190812
    - Minor changes in the section # enable stock zip packages flash
    - Updated recovery.fstab
    - Posted by Hadenix
    - Excluded from TWRP APP assembly
    - A new separate version with the prefix E, for the European version. The international version is going without the prefix E
    - And minor corrections
    2
    Disable_Dm-Verity_ForceEncrypt_02.04.2019
    2
    - Download newest TWRP_by_Hadenix ( link on first page ).
    - In Windows ADB unlock command = "fastboot flashing unlock" (phone start on fastboot, command : "ADB reboot bootlader" )
    - Flash TWRP recovery (TWRP_by_Hadenix) in SP_Flash_Tool (only recovery)
    - Restart to TWRP recovery right away.. By holding Power + Volume up (Keep holding to pass orange state screen) then in small text screen use VL+ to scroll and VL- to select.
    - In TWRP recovery mount system (then go to system/system/) and rename "recovery-from-boot.p" > "recovery-from-boot.p.bak"
    - In recovery install Magisk 20.0 ( https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip)
    - Restart to recovery again
    - Format data
    - Install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
    https://androidfilehost.com/?fid=1395089523397887333
    - Start system and active Magisk.