[RECOVERY][UNOFFICIAL][3.5.0][apollo]TWRP for Mi 10T/Mi 10T Pro/Redmi K30S Ultra

Search This thread

Illuvitar

Senior Member
Jan 26, 2011
68
11
The upstream download for skkk is here:


The current filename is: "3.6.1_11-RedmiK30SUltra_v3.4_A12-apollo-skkk_448c5"

It's orders of magnitude faster than androidfilehost, and the md5sum matches for twrp-3.6.1_11-v3.4

The skkk project page seems to be:

I can't make out a word of it. Can a Chinese reader confirm that it's actually open source?
 
Last edited:
  • Like
Reactions: pickripper

jenaplisken

Senior Member
Dec 2, 2008
384
111
The upstream download for skkk is here:


The current filename is: "3.6.1_11-RedmiK30SUltra_v3.4_A12-apollo-skkk_448c5"

It's orders of magnitude faster than androidfilehost, and the md5sum matches for twrp-3.6.1_11-v3.4

The skkk project page seems to be:

I can't make out a word of it. Can a Chinese reader confirm that it's actually open source?
Once you set your language, it's a twrp like other. Not official. After all also Whyle recovery isn't official.
In any case you can try it without install (only boot not flash).
 

user2332

Member
Nov 2, 2019
26
1
Do you think it will be?
When do you think it will be?
Android 12 under normal TWRP due to backup -> Restore.
 

a1238046

Member
Sep 29, 2013
18
8
The upstream download for skkk is here:


The current filename is: "3.6.1_11-RedmiK30SUltra_v3.4_A12-apollo-skkk_448c5"

It's orders of magnitude faster than androidfilehost, and the md5sum matches for twrp-3.6.1_11-v3.4

The skkk project page seems to be:

I can't make out a word of it. Can a Chinese reader confirm that it's actually open source?
I can read Chinese.
That site seems like a very new and small Chinese developer forum.
There are only about 1500~2000 posts in the whole site.

I checked the developer and recovery section in the forum, but I cannot find a single post about those android 12 recoveries or a dev named skkk.
 
Last edited:

jrotaetxe

Senior Member
Mar 31, 2009
259
85
Hi everybody.
I am having issues mounting data partition after upgrading to MIUI13. Seems these TWRP . Second space is disabled but I have had a dual application activo (I do not know if this is relevant or not), but with many TWRP imgs, the phone is unable to boot and with the last ones are no asking for data partition passwrd and are unable to unmount/mount data partition. The only one that seemed to run was Orange fox (asking for a passwd), but when password typed was also unable to decrypt... Any idea to proceed? (I use fastboot boot method. Do not like to flash other recoveries)
 

AHMED8266

Member
May 30, 2022
6
0
sir it's a heavy request.i need android 12 miui 13 twrp file for "mi 10t 5g".current file is not working...
 

user2332

Member
Nov 2, 2019
26
1
Hi!
@jenaplisken
"I used both a11 and a12 of skkk. No issue at all."
Does the /System partition mount in the Mount menu work properly for you ?
Advanced -> File Manager -> see everything ? You can copy, write, good ?
Unfortunately, as far as I can see, it's not working.
 

Alpha120

Senior Member
Jun 23, 2012
149
32
Sevila
Hello, my Mi10T Pro 5G was updated to MIUI 13 and previous TWRP 3.5.0 is not working anymore.
So I downloaded TWRP 3.6.1 from the link was posted before, but this TWRP is unable to decrypt user data, it does not even ask for the password.
I am not flashing it, but simply boot it when I get an upgrade so I can flash Magisk again.
Maybe it could be possible in a future to access the user data as before?
 

QbaTheRipper

Member
Aug 18, 2013
13
4
Hello, my Mi10T Pro 5G was updated to MIUI 13 and previous TWRP 3.5.0 is not working anymore.
So I downloaded TWRP 3.6.1 from the link was posted before, but this TWRP is unable to decrypt user data, it does not even ask for the password.
I am not flashing it, but simply boot it when I get an upgrade so I can flash Magisk again.
Maybe it could be possible in a future to access the user data as before?
Try this recovery.Decryption is working again like before. https://androidfilehost.com/?fid=15664248565197181943
 
  • Like
Reactions: Alpha120

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I am still with A11, on EU 21.7.28, should I flash TWRP A11 or A12?
    If you need to update Mi10T Pro from EU 21.7.28 (last miui before camera crash) to last miui EU 22.6.15 dev , you need last recovery twrp-3.6.2_12-v3.6.1_A12-apollo-skkk.img . For stable MIUI V13.0.5.0.SJDCNXM you have to use "fastboot".
    1
    Hello, my Mi10T Pro 5G was updated to MIUI 13 and previous TWRP 3.5.0 is not working anymore.
    So I downloaded TWRP 3.6.1 from the link was posted before, but this TWRP is unable to decrypt user data, it does not even ask for the password.
    I am not flashing it, but simply boot it when I get an upgrade so I can flash Magisk again.
    Maybe it could be possible in a future to access the user data as before?
    Try this recovery.Decryption is working again like before. https://androidfilehost.com/?fid=15664248565197181943
    1
    Yes.dev fastboot version , was broken. Now is fixed, and is only recovery version.Check this out https://mifirm.net/model/apollo.ttt#eu-dev
  • 21
    3.4.0_0 (07.11.2020)
    - Init twrp recovery
    - Decryption data
    - Vibration

    3.4.0_1 (08.11.2020)
    - Can flash twrp in recovery partition.

    3.4.0_2 (20.11.2020)
    - Fix permission denied on mount
    - Fix mtp not work after install ROM. (For me seem work)

    3.4.0_3 (21.11.2020)
    - Fix f2fs file system
    - Fix screenshots(in TWRP folder)
    - Adjust MTP device name
    - Resize GUI measures
    after wipe, I suggest you change filesystem to f2fs.

    -..


    3.4.0_10(07.12.2020)
    - /data filesystem to f2fs
    - Fix mtp after factory reset
    - Add some partition (flash .img)
    After working on TWRP for 2 weeks (without configuring the system), I finally found solution to resolve it.
    Now you can flash all roms as you have done usually

    3.5.0_10-beta_1(04.01.2021
    - Android 11 support
    - Android 11 data decryption
    - Add-on zips
    (install > select storage)
    - Add prevent twrp replace
    - Add OTA fingerprint
    Notice: in some case a11 data decryption won't work, i will fix it as soon as possible.

    Tips: after wipe data, I was set the default mtp directory to /data/media and after boot, the mtp directory will set /data/media/0.
    ----------------------------------------------------------------------
    Thanks every testers:
    @xingdu @GabSam @kimbo_985

    give me yours right id.
    ----------------------------------------------------------------------
    If you like my hard works, please buy me a coffee to keep me alive.:cry:
    PayPal
    ----------------------------------------------------------------------
    Blocking checks
    - [✔] Correct screen/recovery size
    - [✔] Working Touch, screen
    - [✔] Backup to internal/microSD
    - [✔] Restore from internal/microSD
    - [✔] reboot to system
    - [✔] ADB


    Medium checks
    - [❌] update.zip sideload
    - [✔] UI colors (red/blue inversions)
    - [✔] Screen goes off and on
    - [✔] F2FS/EXT4 Support, exFAT/NTFS where supported
    - [✔] all important partitions listed in mount/backup lists
    - [✔] backup/restore to/from external (USB-OTG) storage (not supported by the device)
    - [❌] backup/restore to/from adb (https://gerrit.omnirom.org/#/c/15943/)
    - [✔] decrypt /data
    - [✔] Correct date



    Minor checks
    - [✔] MTP export
    - [✔] reboot to bootloader
    - [✔] reboot to recovery
    - [✔] poweroff
    - [✔] battery level
    - [✔] temperature
    - [❓] encrypted backups
    - [❓] input devices via USB (USB-OTG) - keyboard, mouse and disks (not supported by the device)
    - [✔] set brightness
    - [✔] vibrate
    - [✔] screenshot
    20
    Code:
    /**
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    **/

    Working:
    • Boot
    • Decryption data
    • Vibration
    • flash zip
    • Android 11 support
    • Ota update
    continue in #2 post

    Not working:
    • ADB sideload

    Supported devices:
    • Mi 10T (apollo)
    • Mi 10T PRO (apollopro)
    • Redmi K30S Ultra (apollo)
    I haven't tested on Mi 10T and K30S, but it should work


    We couldn't modify /system /vendor /product and /odm, caused by new type of partition, so if you want modify them, use magisk module instead.​

    Install guide:
    To boot (Reccomended):
    Code:
    fastboot boot <twrp.img>

    To recovery (Not Reccomended):
    Code:
    fastboot flash recovery <twrp.img>

    -----
    How can I pass file to device, if mtp not work s?
    You can use adb command, to push them.
    Code:
    adb push C:\<file>.zip /sdcard

    Where are the files, which i copied with mtp?
    Maybe you can find them in /data/media

    Can i flash twrp in recovery partition?
    Yes, you can flash since 3.5.0_10-beta 1. I provided prevent-twrp-replace (to keep twrp after reboot) and stock-fingerprint (for ota update).

    -----

    Download:

    Donation:

    Discussion:


    Code source:
    https://github.com/Whyle/android_device_xiaomi_apollo
    https://github.com/TeamWin/android_bootable_recovery
    -----
    Thanks:
    @mauronofrio and other twrp developer.
    6
    My brother installed the newest 3.5.0 beta on his mi 10t pro but the system Partition doesn't show up. Flashing the newest xiaomi EU fails. (Unable to mount/unable to open block device)

    Any ideas ?

    Edit: he managed to boot the rom after a few attempts. Seems like it was a recovery bootloop. But still weird, that the system Partition does not show up in twrp
    It's because google introduced dynamic partitioning a while ago. And TWRP just added support for it in 3.5 - basically super is a "master partition" containing system, vendor, and bunch of other partitions, and instructions on where is what. Without supported software such as magisk you can't really see those partitions. TWRP just added that few days ago, so expect it to work after a while...
    4
    For those who are trying to flash xiaomi.eu roms, here is what I did using this twrp:
    (I flashed this twrp)

    **i'm from global rom mi 10t (apollo)
    **Weekly eu rom is what I installed
    **Since I cannot format the system, I tried to dirty flashed the rom.

    1. Format data only (advance format)
    2. Flash rom zip file and wait until it's done.
    *You will notice that after flashing, if you will reboot into system, you will be stucked in bootlooping into twrp.
    *In twrp, go to "mount", you will also notice that you cannot mount data and system.
    Next step...
    3. Format data (not in advance format) and wait until it's successful
    4. Go back to "mount" and you will notice now that data was already mounted.
    5. Mount system and reboot. First boot will take at least 5 minutes to load.

    *Data decryption is working when you successfully flashed the eu rom.

    This worked for me like a charm. Hope this helps.
    3
    What have you done?

    I face the same problem because I update full zip recovery from MIUI 12.0.4.0 (A10) to 12.1.1.0 (A11). I simply do backup and then flash the zip and flash magisk. Got this problem.

    After I flash back original boot.img (extracted from recovery/fastboot rom) from fastboot, then it boot normally, but lose the root (and magisk). Someone told me that it is because I don't disable magisk module before flashing, causing the partition to be dirty when updating.

    I don't know that yet, so I ended up flashing fastboot rom A10 (still can't boot) and factory reset data to clear all the dirty partition. In your case, you probably stucked also. You can only flash original boot.img to boot normally. Backup your data as needed, then do a factory reset (probably have to reset from original recovery) to clear all the partition. Then you can try to boot TWRP and root again using magisk, and then restore your data as needed.


    MTP is working as long as your partition is not stuck just like above. It seems you have to wipe data after flashing any ROM, as the remnant from previous ROM will get it to bootloop.
    COULD U MAKE ONE GUIDE THREAD FOR THE NOOB LIKE ME ?
    THANKS IN ADVANCE