will backup encrypted data, and restore it also? whyle failed me for this. couldn't restore data, rom kept treating it like blank (didn't register encryption status?)
[RECOVERY][UNOFFICIAL][3.5.2][apollo]TWRP for Mi 10T/Mi 10T Pro/Redmi K30S Ultra
- Thread starter mhmdeveloper
- Start date
Mi 10tpro
Estou com um probleminha com meu mi 10t pro
Eu instalei o Twrp no meu mi 10t pro não oficial versão 3.5.2 Por Master mais do erro ..Internal Storage = 0 ..na memória interna .. ela não reconhece .. Não consigo ver a pasta de download do meu dispositivo eu agradeceria sim, você pode me ajudar a resolver o problema. Obrigado...
Estou com um probleminha com meu mi 10t pro
Eu instalei o Twrp no meu mi 10t pro não oficial versão 3.5.2 Por Master mais do erro ..Internal Storage = 0 ..na memória interna .. ela não reconhece .. Não consigo ver a pasta de download do meu dispositivo eu agradeceria sim, você pode me ajudar a resolver o problema. Obrigado...
I was able to install Android 12, however once the cutom room is installed and you want to reinstall TWRP, it doesn't start, it just stays on the TWRP logo flashing many times.
despues de haber flasheado A12 no puedo acceder al TWRP de esta version se queda en un loop donde se reinicia muchas veces
Which miui version plzAmazing work, thank you so much. Finally we can have twrp flashed and use it normally with decryption on stock firmwares.
Will it work on miui 12.5.4 RJDMIXM global. I want to flash magisk. Do i have to format data after flashing magisk
Which command you used boot or flash. And this version directly decrypt the storage or you have to format data to decrypt. If u have formated the data then is there any need to use reboot to recovery or just flash the magisk or any zip. I am a new bie so plz guide me
Hey i wonder if this works perfectly and all functions work on mi 10t pro? Did you boot it or flash it? Is this better than whyle version?
Thanks in advance
i am having issue of twrp blinking on and off
and unable to use it - i flashed Android 12 based
custom rom - tried to flash twrp but it remains same
plz guide
and unable to use it - i flashed Android 12 based
custom rom - tried to flash twrp but it remains same
plz guide
Use skkk twrp for apollo A12
Here you can find the img:
skkk/TWRP/A12/v3.3_A12 • AKR DL
dl.akr-developers.com
thanks dear - though now twrp is stable - its in chineseUse skkk twrp for apollo A12
Here you can find the img:
I used this but it cannot decrypt, so you can wipe and flash rom but wont be able to install updateskkk/TWRP/A12/v3.3_A12 • AKR DL
that can be managed but the issue is that touch is not working
so cannot do anything - any help plz
you can change the language, i have everything working normally, which image you grab over there? there's an english default one, named:
3.6.0_11-RedmiK30SUltra_v3.3_A12-apollo-skkk_1300ba6f.img
D
Deleted member 2582513
Guest
I have a work profile set up, and I get a hang at TWRP boot screen for about 3 minutes before it asks for my password for User[0]
After typing my password I get this screen, then it proceeds with no issues.
Is this normal? Anything I can do to stop the 3 minute hang every time? I'm on Lineage 18.1 (with work profile setup by Shelter)
After typing my password I get this screen, then it proceeds with no issues.
Is this normal? Anything I can do to stop the 3 minute hang every time? I'm on Lineage 18.1 (with work profile setup by Shelter)
Hi!
Please help me.
Write at least one proposal.
EEA Miui 13, A12 which TWRP do I need?
I use this one: twrp-3.6.1_11-v3.4_A12-apollo-skkk
1, Problem:
After formatting (Delete -> Format "Yes") I cannot access the internal storage.
2, Problem (important solution).
I want to make a NAND backup
1, Test:
TWRP (Backup) check all, create.
TWRP (Restore) -> Successful
TWRP (Reboot -> System Reboot) TWRP starts!
2, test:
TWRP (Backup) uncheck Data, nothing else
TWRP (Restore) -> Successful
TWRP (Reboot -> System Reboot) TWRP starts!
How to make a NAND backup correctly?
How to make a good NAND backup?
What is the NAN backup process?
Please help me.
Write at least one suggestion.
Please help me.
Write at least one proposal.
EEA Miui 13, A12 which TWRP do I need?
I use this one: twrp-3.6.1_11-v3.4_A12-apollo-skkk
1, Problem:
After formatting (Delete -> Format "Yes") I cannot access the internal storage.
2, Problem (important solution).
I want to make a NAND backup
1, Test:
TWRP (Backup) check all, create.
TWRP (Restore) -> Successful
TWRP (Reboot -> System Reboot) TWRP starts!
2, test:
TWRP (Backup) uncheck Data, nothing else
TWRP (Restore) -> Successful
TWRP (Reboot -> System Reboot) TWRP starts!
How to make a NAND backup correctly?
How to make a good NAND backup?
What is the NAN backup process?
Please help me.
Write at least one suggestion.
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
11
Code:/** * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. **/
Working:
- Boot
- Decryption data
- Vibration
- flash zip
- Android 11 support
- Ota update
- ADB Sideload
- Mi 10T (apollo)
- Mi 10T PRO (apollopro)
- Redmi K30S Ultra (apollo)
NOTE: Use BOOT COMMAND to Encrypt on MIUI. On AOSP you can directly flash.
Install guide:
To boot (Recommended if using MIUI Rom):
Code:
Code:fastboot boot <twrp.img>
To recovery (Recommended if using AOSP Rom):
Code:
Code:fastboot flash recovery <twrp.img>
Download: Here
Device Source: https://github.com/mhmdeve/twrp_device_xiaomi_apollo
TWRP Source: https://github.com/minimal-manifest-twrp
Donate: Here
Credits:
@Whyle for base tree
@akshat2012 for fixing Padding
@usmanov_ms for testing
@sewa2k for testing
@apollocustom for testing8Update: 12/09/2021
Changelog:
- Fixed Decryption on MIUI and Aosp Roms
- You Can now use TWRP with any version of MIUI(Xiaomi.eu or Stock)
- Added FastbootD ( Can Flash A12 Port)
- Can flash any rom Except arrow (Because of AES-Encryption)
- Updated Addon ( Thanks @risshhhiiii)
Credits:
@Dobsgw @Ramisky @sewa2k @Rumy786 @Superman_In_ur_garden @usmanov_ms @risshhhiiii and some i missed for helping and testing
Download | V1.1 : Here | Mirror2
Booting this twrp (not flashing), i've done a complete nandroid backup without error. Miui eea 12.5.5.02
Amazing work, thank you so much. Finally we can have twrp flashed and use it normally with decryption on stock firmwares.
