[RECOVERY][UNOFFICIAL][Deen] TWRP

borksek

Senior Member
Aug 7, 2017
561
166
53
Blekinge
We have finnaly gotten TWRP for the Motorola One Deen

https://androidfilehost.com/?fid=11410963190603888689

ALL CREDIT GOES TO @Alberto97 FOR MAKING TWRP FOR A DEVICE THAT HE DOESN'T OWN!

How to flash:

You need ADB fastboot files
You need an Unlocked Bootloader: https://www.youtube.com/watch?v=_Zhqfzg__IA "full tutorial"
The recovery image: "link above"

Command: fastboot boot twrp-deen-0.img

Your warranty is Void!

I'm NOT responsible for broken devices or anything that will happen resulting booting twrp.

For some reason i have to explain that this it not flashing. It's booting. You need to use the command to boot to twrp every time.
 
Last edited:

p-walker

Senior Member
Aug 20, 2012
84
24
28
actually I just saw that Tys0n indeed used a "chef" based TWRP image on his root attempt ( link ) , I assume using this updated one from Alberto should be even better.
 

borksek

Senior Member
Aug 7, 2017
561
166
53
Blekinge
actually I just saw that Tys0n indeed used a "chef" based TWRP image on his root attempt ( link ) , I assume using this updated one from Alberto should be even better.
It shouldn't even boot. It's 2 completely different devices with 2 different chipsets. So no. This one is built using our device sources
 

Danielikto

Member
Jun 14, 2014
38
5
0
Monterrey
Slot a or b

---------- Post added at 08:08 PM ---------- Previous post was at 08:03 PM ----------

What I can do?

does not enter bootloader

I tried to install twrp and magisk

when I installed magisk, he died


 
Last edited:

tys0n

Senior Member
Nov 29, 2010
3,110
2,042
253
Stockholm
actually I just saw that Tys0n indeed used a "chef" based TWRP image on his root attempt ( link ) , I assume using this updated one from Alberto should be even better.
I've never used any file for chef. I just linked to bootloader unlock guide in chef forum :)

Sent from my H9436 using Tapatalk
 
Oct 18, 2015
16
13
0
I have the same problem (black screen and only blinking LED when plugged in) after trying to switch the partition slot!

I'll try to see if I can fix this but so far it looks bad :/

---------- Post added at 09:23 PM ---------- Previous post was at 09:13 PM ----------

Small update: the device is in QLOAD mode which apparently can be fixed with https://github.com/jareddantis/unbrick_8960

---------- Post added at 09:59 PM ---------- Previous post was at 09:23 PM ----------

Ok, apparently the recovery can be done with blankflash.

If anyone knows how to get one for the moto one it would be greatly appreciated!
 
  • Like
Reactions: [email protected]

borksek

Senior Member
Aug 7, 2017
561
166
53
Blekinge
I have the same problem (black screen and only blinking LED when plugged in) after trying to switch the partition slot!

I'll try to see if I can fix this but so far it looks bad :/

---------- Post added at 09:23 PM ---------- Previous post was at 09:13 PM ----------

Small update: the device is in QLOAD mode which apparently can be fixed with https://github.com/jareddantis/unbrick_8960

---------- Post added at 09:59 PM ---------- Previous post was at 09:23 PM ----------

Ok, apparently the recovery can be done with blankflash.

If anyone knows how to get one for the moto one it would be greatly appreciated!
There is no blank flash. Go back to where you bought the phone and tell them it was done by an update. Usually it is backed up by the warranty