• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][UNOFFICIAL][miatoll] TWRP-3.6.X

Search This thread

meganukebmp

Senior Member
Feb 20, 2013
323
237
Sofia
teamwin.png


Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system which are functions often unsupported by stock recovery images. It is, therefore, often installed when flashing, installing, or rooting Android devices, although it isn't dependent on a device being rooted prior to installation.​
C:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this
* recovery before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

This is TWRP 3.6.X for all miatoll devices.
This works with curtana, excalibur, gram and joyeuse.
This does NOT work with the MediaTek Note 9!

WARNING! THIS RECOVERY ONLY SUPPORTS FBEv2 ENCRYPTION FOR THE TIME BEING.
THIS MEANS THAT IT WILL ONLY BE ABLE TO DECRYPT LINEAGEOS BASED ROMS.
DECRYPTION WILL NOT WORK ON MIUI FOR THE TIME BEING!



Working:

  • Decryption
  • Vibration
  • OTG
  • MTP
  • Sideloading
  • Backups and Restores
  • FastbootD
  • everything else
Not Working:
  • yOu TeLl mEeE
Untested:
  • Partitioning SD card. (if someone can test that'd be nice)

Instructions:

1. Reboot into bootloader/fastboot and flash the image.

Code:
fastboot flash recovery twrp.img

2. Hold down power and volume up until the Redmi logo appears.
3. When it appears release power and keep holding volume up until you're in TWRP.


Downloads:
https://files.moskvich.xyz/TWRP/miatoll/twrp-3.6.0_11-miatoll.img

TeamWin Recovery Project​

Contributors
@meganukebmp @Nebrassy @bigbiff @Captain_Throwback @jro1979oliver @mauronofrio

Source Code:
Kernel: https://github.com/LineageOS/android_kernel_xiaomi_sm6250
Recovery: https://github.com/omnirom/android_bootable_recovery/
Device Tree: https://github.com/TeamMoskvich/android_device_xiaomi_miatoll-twrp

TWRP Version: 3.6.0_11
TWRP Kernel: Linux 4.14.x

Please provide logcats and dmesg logs when encountering issues!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    teamwin.png


    Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system which are functions often unsupported by stock recovery images. It is, therefore, often installed when flashing, installing, or rooting Android devices, although it isn't dependent on a device being rooted prior to installation.​
    C:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this
    * recovery before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    This is TWRP 3.6.X for all miatoll devices.
    This works with curtana, excalibur, gram and joyeuse.
    This does NOT work with the MediaTek Note 9!

    WARNING! THIS RECOVERY ONLY SUPPORTS FBEv2 ENCRYPTION FOR THE TIME BEING.
    THIS MEANS THAT IT WILL ONLY BE ABLE TO DECRYPT LINEAGEOS BASED ROMS.
    DECRYPTION WILL NOT WORK ON MIUI FOR THE TIME BEING!



    Working:

    • Decryption
    • Vibration
    • OTG
    • MTP
    • Sideloading
    • Backups and Restores
    • FastbootD
    • everything else
    Not Working:
    • yOu TeLl mEeE
    Untested:
    • Partitioning SD card. (if someone can test that'd be nice)

    Instructions:

    1. Reboot into bootloader/fastboot and flash the image.

    Code:
    fastboot flash recovery twrp.img

    2. Hold down power and volume up until the Redmi logo appears.
    3. When it appears release power and keep holding volume up until you're in TWRP.


    Downloads:
    https://files.moskvich.xyz/TWRP/miatoll/twrp-3.6.0_11-miatoll.img

    TeamWin Recovery Project​

    Contributors
    @meganukebmp @Nebrassy @bigbiff @Captain_Throwback @jro1979oliver @mauronofrio

    Source Code:
    Kernel: https://github.com/LineageOS/android_kernel_xiaomi_sm6250
    Recovery: https://github.com/omnirom/android_bootable_recovery/
    Device Tree: https://github.com/TeamMoskvich/android_device_xiaomi_miatoll-twrp

    TWRP Version: 3.6.0_11
    TWRP Kernel: Linux 4.14.x

    Please provide logcats and dmesg logs when encountering issues!
    1

    Changelog:​


    2021-11-23:
    • Initial Release
    1
    hope it has a flashable zip :)

    Can you make a flashable zip? Hehe

    It's a recovery, why do you need it to be a flashable zip?

    If you want to flash it on-device without a PC you can use a terminal like so:
    Bash:
    dd if=/path/to/your/twrp.zip of=/dev/block/bootdevice/by-name/recovery bs=4M
    1
    Flashed with success on a joyeuse device (y)
    Im Joyeuse also mine is the data encryted how about yours?