• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][UNOFFICIAL] TWRP for Galaxy Note 10 (Exynos)

Search This thread

rypz79

Senior Member
Apr 27, 2013
378
58
Ramat-Gan

i23u8

Senior Member
Jul 24, 2015
435
148
Manila
OnePlus 7 Pro
Xiaomi Poco F3
The one with the description on the instruction page
NEMESIS_KERNEL_S10_N10_ANDROID_Q_V4

I did data format in TWRP after flashing disabler, it boots to Samsung's Start Up Image with notification at the buttom saying "you and using an unofficial firmware" and it goes blank after that

Show's a blank screen after the image below.
Please help

Try booting first by holding the power button and vol up for 7 seconds and then letting go before it boots you to twrp. I think nemesis kernel requires booting to recovery for magisk to work.

It looks like you'd have to reinstall stock fw though. Either bsl7 or ctc9 fw. You can find them on androidfilehost.
 
Last edited:

askmydas

Senior Member
Jul 18, 2016
50
7
Please help, I followed the instructions on the first page and flashed the TWRP with Odin, and also flashed the NEMESIS DISABLER and NEMESIS KERNEL. Now my note 10 plus Exynos refused to boot. Shows blank screen after the Samsung Start Up Image.
Please help

What nemesis kernel version did you flash?

Did you format data in twrp after flashing disabler?

Try booting first by holding the power button and vol up for 7 seconds and then letting go before it boots you to twrp. I think nemesis kernel requires booting to recovery for magisk to work.

It looks like you'd have to reinstall stock fw though. Either bsl7 or ctc9 fw. You can find them on androidfilehost.

I downloaded the CTC9 firmware and flashed with Odin v3.14.1 after which successful flash, it rebooted and the below screen popped up.
Please help
 

Attachments

  • 20200526_103636.jpg
    20200526_103636.jpg
    217.8 KB · Views: 379

rypz79

Senior Member
Apr 27, 2013
378
58
Ramat-Gan
Last edited:

sevsman

Senior Member
Mar 24, 2011
658
179
I am doing a step wrong somewhere because I have a blank screen...
So here is what I do, I have the stock ROM, AP patched with Magisk, I proceed normally as in once doing flash is complete, I wipe data, next I go again into download mode to flash TWRP which then I read on Dr Ketan DO NOT hit format data, but I did that anyway according to your guide, then I flashed nemesis disabler but I did not flash kernal as I don't mind the key combo...
But what am I doing wrong in here in such that I cannot boot into system at all...?
 

minidude2012

Senior Member
Nov 13, 2013
1,171
988
26
Telford
Huawei Nexus 6P
Samsung Galaxy Note 10+
I am doing a step wrong somewhere because I have a blank screen...
So here is what I do, I have the stock ROM, AP patched with Magisk, I proceed normally as in once doing flash is complete, I wipe data, next I go again into download mode to flash TWRP which then I read on Dr Ketan DO NOT hit format data, but I did that anyway according to your guide, then I flashed nemesis disabler but I did not flash kernal as I don't mind the key combo...
But what am I doing wrong in here in such that I cannot boot into system at all...?

This recovery is outdated follow instructions from Dr ketan and use different recovery
 
  • Like
Reactions: Dante63

Мишкa

Member
Aug 7, 2020
47
1
29
Herne
Hey guys,

I unlocked the phones Bootloader and created the magisk_patched.tar, but when I try to root it with JOdin 3 (Mac OS X) it always says that there is a corrupted file (which isn't there, 100% sure).

I do not have a Windows PC at hand.

Any help how to get this done as a mac user?

Please help me, I need my phone back working tomorrow.

Greetings,

Mishka
 

sevsman

Senior Member
Mar 24, 2011
658
179

D-Mak

Senior Member
Oct 29, 2013
223
50
Spain (España)
Can you help me please?!

I've followed the tutorial dr.ketan and I've been able to work it out. :good:


How can I get it back or what do I have to do?


Edit: I've been able to work it out.
 
Last edited:

monicaONxda

Member
Aug 16, 2020
33
5
How to install TWRP after Magisk (and already rooted)?

Can I just ADB "fastboot flash recovery twrp-xxxx.img" ?

Wouldn't it overwrite Magisk, which is installed on recovery also?

Will it work with encryption (already encrypted with screen password)?

Which TWRP image (link?) do I exactly need for a Galaxy Note 10+ (Exynos) ?

Thanks in advance!
 

minidude2012

Senior Member
Nov 13, 2013
1,171
988
26
Telford
Huawei Nexus 6P
Samsung Galaxy Note 10+
Can I just ADB "fastboot flash recovery twrp-xxxx.img" ?

Wouldn't it overwrite Magisk, which is installed on recovery also?

Will it work with encryption (already encrypted with screen password)?

Which TWRP image (link?) do I exactly need for a Galaxy Note 10+ (Exynos) ?

Thanks in advance!

Fastboot isn't a thing in Samsung phones they use odin
 

abrahamjohn731

Senior Member
Dec 4, 2012
81
12
Belgium
Hi Guys. I try for some days now to install twrp to my note 10 plus 5g N976B with android 10 but odin always fails. I tried many files, same result. I even try to flash the AP patched file with magisk but ODin fails. Odin do not fail when I try to reinstall stock rom. But for twrp and root it always fails. I tried different versions of Odin. no success. Please help
 

Top Liked Posts

  • There are no posts matching your filters.
  • 40
    Team Win Recovery Project 3.3.1

    https%3A%2F%2Fwww.maketecheasier.com%2Fassets%2Fuploads%2F2019%2F01%2Ftwrp-featured.jpg

    Exynos ONLY.
    In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.


    Special Notes:
    1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
    2. KNOX will be tripped once you flashed custom binaries to your phone.
    (Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
    3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
    (You can flash custom ROMs if you want to keep the OS up-to-date.)
    4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work


    Download: Note 10(Exynos variants - N970/971/975/976/N/F/B)
    Download

    Sources:
    TWRP Tree and kernel source

    Changelog:
    15.12.2019
    - Updated TWRP for Android 10.0
    - From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)

    22.09.2019
    -Reverted MTP Changes from last build since for some mtp dont worked in system

    21.09.2019
    - Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
    - Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
    - Reverted FFS MTP changes since new way is more stable :)

    14.09.2019
    - Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
    - Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs

    27.08.2019
    -Initial Release

    Bugs:
    -No one

    Telegram Group
    https://t.me/twrp_n10

    XDA:DevDB Information
    [RECOVERY] TWRP for Galaxy Note 10 (Exynos), Kernel for the Samsung Galaxy Note 10+

    Contributors
    geiti94
    Kernel Special Features:

    Version Information
    Status: Stable
    Stable Release Date: 2019-08-27

    Created 2019-08-27
    Last Updated 2019-12-15
    22
    Guide:
    1. Go to Developer settings and enable oem unlock
    2. power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
    3. in download mode you see the long press vol up option for unlock bl
    4. unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
    5. after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
    6. setup the phone without google account etc
    7. reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
    8. hold vol up + power button while odin is flashing until you are in twrp.
    9. format data in twrp
    10. flash the disabler that is on TWRP download link
    11. flash my kernel avaiable here
    12. press reboot to system in twrp.
    11
    So ASHE sources are out. Today after work i will upload ASHE builds for all 4 modells
    11
    So twrp is updated for Android Q. there will be no more prepatched images since my kernel can now be used. if someone wants a patched recovery instead of kernel he can patch it byself with magisk manager.


    N10 5G and N10+ 5G TWRP will get updated after sammy release Q tars
    10
    so n10 5g and n10+ 5g twrp is added too