yeah it makes it a little bit easier, it's better if you've got control of the reboot.just flashed twrp when I want to enter it the phone get a bootloop. I need to flash the disabler to bring the phone to life. While flashing twrp should I uncheck the autoreboot option?
This exactly what I do and the phone gets the loop and it does not boot into the system either. I will keep trying.yeah it makes it a little bit easier, it's better if you've got control of the reboot.
leave it plugged in in download mode, hold power and volume down for 7 plus seconds. when the phone reboots you'll the windows disconnected sound, immediately switch to volume up and power until it boots into recovery.
the phone should either boot into TWRP, boot into stock recovery or boot into system. if it's bootlooping something else is wrong and you should flash stock and start again if it carries on happening once you've let go.This exactly what I do and the phone gets the loop and it does not boot into the system either. I will keep trying.
I also have that model, did it work?I read some info on this thread about keeping data encrypted but still have some doubts. Can you enlighten me on this?
- If I choose to keep encryption on, TWRP won't be able to access individual file contents for backup/restore or even flashing onto the /data partition. But flashing or backup/restore of other partitions is possible with OTG storage.
- Are "full partition" backups of /data itself possible onto an external OTG storage? And working restore of course
Apart from these encryption limitations, any known issues with the recent builds of android 11?
(my device is the 4G version (G780F/DS) but there is no big reference in its thread about the encryption implications and the TWRP features should be the same)
Thanks!
Thanx a lot so nuts i was with system files fat32. Just did bakcup of "super" with usb-otg formatted with exFat format. Thanx a lot.@Svan987 some of those partitions really don't need backing up as they never be over written. I had a similar issue because the flash drive I used was formatted to VFAT which has a maximum file size of 4gb. backup anything you need off the drive and format it too Ext4 or something else that'll take the bigger files.
If i do this, in my phone will not work anymore biometric and face recognition??
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:* Your warranty is now void. * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or your getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S20 FE 5G G7810, G781B, G781N, G781U, G781U1, G981W and G780G (4G).
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download S20 FE 5G: r8q.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Flash multidisabler-samsung-3.x.zip.Or:
- Go to Advanced > Terminal, type:multidisabler
.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to- Run multidisabler again!
.- Type:7. Go back to Wipe > Format Data > typemultidisabler
again. will see- Finished.
when done.yes
.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
- Haptic feedback is currently not working.
Thanks:
TWRP team
@ooobs007 for testing on S20 FE 5G G781B
ianmacd for multidisabler
Sources:
Kernel tree
Device tree
hi you have to unlock BL download your latest firmware, extract the boot.img and patch it with magisk apk and odin flash...hii,just bought s20fe 5G snapdragon one,indian version(G781B/DS),I want to root it without any twrp.Tried patched boot.img flash through odin but caused bootloop.Can someone help me
yes unlocked BL and did it,found normal magisk has patching issue,i'm trying with magisk canary,will update when done,thanks.hi you have to unlock BL download your latest firmware, extract the boot.img and patch it with magisk apk and odin flash...
Suis le guide d'installation officiel il ya une partie destiné aux appareils Samsung
there is no problem with Magisk stable i just updated to the latest october firmware corrected with Magiskyes unlocked BL and did it,found normal magisk has patching issue,i'm trying with magisk canary,will update when done,thanks.
Ok,I'll do this and update.there is no problem with Magisk stable i just updated to the latest october firmware corrected with Magisk
It worked but I did this with canary build.successfully booted to system and magisk did a quick reboot and setup,need to check root,these google apps take a lot of time to install.Also can you help me to pass safety net check,my CTC fails.Should I go with riru method? or any other way?there is no problem with Magisk stable i just updated to the latest october firmware corrected with Magisk
yeyy rooted successfully,checked now.It worked but I did this with canary build.successfully booted to system and magisk did a quick reboot and setup,need to check root,these google apps take a lot of time to install.Also can you help me to pass safety net check,my CTC fails.Should I go with riru method? or any other way?
I managed to pass for a while but google regularly makes fixes for those that bypass safetynet.It worked but I did this with canary build.successfully booted to system and magisk did a quick reboot and setup,need to check root,these google apps take a lot of time to install.Also can you help me to pass safety net check,my CTC fails.Should I go with riru method? or any other way?
Thanks buddy!I managed to pass for a while but google regularly makes fixes for those that bypass safetynet.
Guys think that now that john.whu (the dev of Magisk) is working in the security section of Google it's going to be harder and harder to get around safetynet...
Follow this thread for safetynet
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
multidisabler
. - Run multidisabler again!
.multidisabler
again. will see - Finished.
when done.yes
.To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
I will start working on the new kernel source soon.@afaneh92 just checking in to ask what if any sources to you want / need to help you ?
I'm on the Samsung open source site now and downloading a zip for G781BXXU2CUD1 but I've no idea if it's kernel sources inside (280mbs ish). another page I saw here mentioned using the inquiry tab to submit a request.
if you can tell me exactly what you want I'll more than happily put in a request for it, I'm sure others would too.
I'll edit this later and add the zip files full name that I've downloaded and if you want that I'll put it mediafire or similar.
SM-G781B_SEA_RR_Opensource.zip is the archive name, taken from clicking on G781BXXU2CUD1 which matches my current baseband and buildnumberView attachment 5299763
New build is up.
Note: steps 2-6 are important, missing any will lose your data.Hi everybody,
Sorry in advance for this noob question.
Starting from stock Android12, I went thru all @afaneh92 process and it's working nicely.
Now I'd like to upgrade to Androi13: do I have to rerun exactly all the process (& so loosing my data)?
In other words: are BL unlock and avb disable persistent after an Odin flash ?
Thank you for sharing your skills !