Power down the phone.
Press Vol+ & plug in USB cable, which is connected to the PC.
Press Vol+ & plug in USB cable, which is connected to the PC.
this current version works fine on OneUI 4/4.1Please Please can you update to the latest kernel source I am waiting for so many times, this smartphone gets an android 12 update
that will depend on the app, if you successfully hide root from your banking app it should work fine. there are a few banking apps that are harder to hide magisk from, they look at more things or the request root access to test the system.Hi all.
I have a Galaxy S20 FE 5G SM-G781B/DS.
Once rooted, is the unlock of apps (like banking apps or other apps) with fingerprint works ?
Thanks.
yes it does both to internal storage and OTG storage. microSD are not able to be detected
as far as TWRP goes they are the same yes.Hello, is the SM-G780G/DS the same as G780G? All I know is that the DS model is Dual Sim, but idk if it's any different.
Also does rooting delete any data?
well, how is it? Bugs, features not working etc. fp performance you know
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:* Your warranty is now void. * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or your getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S20 FE 5G G7810, G781B, G781N, G781U, G781U1, G981W and G780G (4G).
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download S20 FE 5G: r8q.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Flash multidisabler-samsung-3.x.zip.Or:
- Go to Advanced > Terminal, type:multidisabler
.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to- Run multidisabler again!
.- Type:7. Go back to Wipe > Format Data > typemultidisabler
again. will see- Finished.
when done.yes
.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ooobs007 for testing on S20 FE 5G G781B
ianmacd for multidisabler
Sources:
Kernel tree
Device tree
Connect to internet and open browserHi,
I tried to root, but stopped on the first try: Unable to install "vbmeta_disabled.tar" with Odin 3.14.4. Odin says "failed" and on the phone I got a message "Only official binary are allowed… " on the S20. Before starting I have unlocked the bootloader, I get the warning message when it starts.
Can someone give me a direction to look for ? Many thanks.
PS my device is S20FE 5G, SM-G781B, FRENCH (FTM), G781BXXU4FVC4
post your software info and twrp version you flash, I hope its not old buildHello newbie here, when i reboot to twrp after flashing it im geting a bootloop, the twrp logo show up and then the screen goes off one time every 2 seconds, i can only boot to the system if i shut down the phone and then flash twrp again with the auto reboot option checked in :c.
twrp-3.4.0-1_afaneh92-r8qpost your software info and twrp version you flash, I hope its not old build
Too old twrp, flash latest 3.6
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
multidisabler
. - Run multidisabler again!
.multidisabler
again. will see - Finished.
when done.yes
.To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
I will start working on the new kernel source soon.@afaneh92 just checking in to ask what if any sources to you want / need to help you ?
I'm on the Samsung open source site now and downloading a zip for G781BXXU2CUD1 but I've no idea if it's kernel sources inside (280mbs ish). another page I saw here mentioned using the inquiry tab to submit a request.
if you can tell me exactly what you want I'll more than happily put in a request for it, I'm sure others would too.
I'll edit this later and add the zip files full name that I've downloaded and if you want that I'll put it mediafire or similar.
SM-G781B_SEA_RR_Opensource.zip is the archive name, taken from clicking on G781BXXU2CUD1 which matches my current baseband and buildnumberView attachment 5299763
New build is up.
Note: steps 2-6 are important, missing any will lose your data.Hi everybody,
Sorry in advance for this noob question.
Starting from stock Android12, I went thru all @afaneh92 process and it's working nicely.
Now I'd like to upgrade to Androi13: do I have to rerun exactly all the process (& so loosing my data)?
In other words: are BL unlock and avb disable persistent after an Odin flash ?
Thank you for sharing your skills !