Redmi 2 pro super bricked, help me!

gamernayeem

Senior Member
Mar 14, 2015
115
11
38
Dhaka
last night I was playing with my redmi 2 pro and bricked it. What I did with was idiotic. I will describe the incident in depth.



My mobile was running on miui 8 6.7.21(lollipop) but I was having some issue with it, so I wanted to use a custom rom named XOSP. I know that this rom doesn’t work on lollipop bootloader but still I flashed the rom and obvious result is I got boot loop. I could still have fixed that just by flashing fastboot rom but instead of doing that I boot my mobile into fastboot mode and flash the emmc_appsboot.mbn via cmd with fastboot command then I reboot the device. now my device keeps vibrating, I mean if I try to power on my device by pressing and holding power button it starts vibrating in a loop. If I hold volume down and power button it vibrates 13 times, then stops for 1 or 2 second, in this pause if release power button and volume button phone stops vibrating. By the way no led light up or no light in display.

I have connected the mobile with pc but nothing happend, even I can’t find my device in device manager. I have all the drivers and mi flashtool installed and Driver Signature Verification
is disabled in my pc. I have tried to connect the device with battery without battery with volume button pressed but nothing happens. I even tried the resurrection method by connecting to point with wire but still nothing happens it.
Bro this is my only mobile and there is no xiaomi customer care in this country you are the only hope. I can’t buy another device within 7-8 months, so please help me to bring the device back.
 

shanx_verma

Senior Member
May 4, 2014
464
117
73
Delhi
Test point

Did this test point test point method not work for you?? :( -

Quick guide:
- Disassemble the phone and to weld together the two points (see attached picture).
- Connect your phone to your PC via USB
- Start MiFlash and make it all settings
- Set the phone battery
- Hitting, pressing "Flash" button
- Flash stuck on Attempting to connect Device - do not panic.
- It is necessary to remove the connection with the points and reconnect to the PC with the battery in the phone.
- The installation process will continue.
- As a result, the phone is loaded.
 

Attachments

Last edited:

gamernayeem

Senior Member
Mar 14, 2015
115
11
38
Dhaka
Did this test point test point method not work for you?? :( -

Quick guide:
- Disassemble the phone and to weld together the two points (see attached picture).
- Connect your phone to your PC via USB
- Start MiFlash and make it all settings
- Set the phone battery
- Hitting, pressing "Flash" button
- Flash stuck on Attempting to connect Device - do not panic.
- It is necessary to remove the connection with the points and reconnect to the PC with the battery in the phone.
- The installation process will continue.
- As a result, the phone is loaded.
thanks
 
  • Like
Reactions: shanx_verma

gamernayeem

Senior Member
Mar 14, 2015
115
11
38
Dhaka
You're very very welcomebro, cuz I know exactly how it feels !! :) :)

Let me know if you face any issues.. :)
a had a small problem after fixing the phone, when the phone booted up the screen was shaking and a there was dark shade around the a screen. though i dont have the problem now. Any idea whey it happened?