• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Redmi Go Aosp 9

Status
Not open for further replies.
Search This thread

samsungics1200

Senior Member
May 9, 2013
116
45
calapan city
Follow the instructions
Files required to be download:
Aosp 9:here
build.prop: here
Flash GSI with TWRP use this fix sd card not read in twrp here
reboot to twrp by pressing power + volume up

Perform a factory reset within TWRP. format data

Download and extract system-arm-aonly-gapps-su.img.xz and you will get system-arm-aonly-gapps-su.img

Transfer the system-arm-aonly-gapps-su.img from your PC to your device’s internal storage where TWRP can access it.

Tap on “Install

Change the type from “zip” to “image.

Find and select the system-arm-aonly-gapps-su.img you downloaded.

Choose to flash to the system partition

no need to flash modified vendor
Once that is done, reboot your device.
Fix : performance copy the build.prop to system/

Bugs: google certification (fix here) after registration clear the google apps data (framewrork/services)


XDA:DevDB Information
Aosp 9 Redmi Go, ROM for all devices (see above for details)

Contributors
samsungics1200, phhusson
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: Aosp 9

Version Information
Status: Testing
Current Beta Version: April 16 2019

Created 2019-04-17
Last Updated 2019-06-11
 

Attachments

  • Screenshot_20190416-031101.png
    Screenshot_20190416-031101.png
    207.1 KB · Views: 6,588
  • Screenshot_20190417-123345.jpg
    Screenshot_20190417-123345.jpg
    53.5 KB · Views: 6,614
  • Screenshot_20190416-120331.png
    Screenshot_20190416-120331.png
    91.2 KB · Views: 6,586
  • Screenshot_20190416-103911.png
    Screenshot_20190416-103911.png
    193.5 KB · Views: 6,357
Last edited:

JonnyTech

Senior Member
Dec 4, 2013
133
46
Thanks - the file is available for download now.

I have installed the ROM and it works well but do you know if it is possible to disable the forced device encryption?
 

zakirshikhli

Member
Nov 11, 2016
5
0
Baku
Auto booting to fastboot after installing... (installed to redmi go, it is unlocked, followed instruction, tried minimum 3-4 times, tried several variants of 9.0 Pie GSI etc.)
If You installed 9.0 by the instruction above and it successfully started, it means there is some hardware difference between different region redmi go devices. Mine is Global version.

Stock 8.1 GO is installing and starting normally from TWRP. Problem occurs only with the rom from this thread.

I want to switch to 9.0 beacuse stock 8.1 GO have push notification issue. Believe me, I tried everything to fix it, but unsuccessfully...

Waiting for Your help.
 
Last edited:

JonnyTech

Senior Member
Dec 4, 2013
133
46
Instructions

NOTE: Do not flash the vendor file from the OP, that causes bootloops on my device.

This is what I did - now happily running AOSP 9:
- Restore stock firmware (http://en.miui.com/download-365.html)
- Reboot then perform system update to get latest release
- Reboot to bootloader (fastboot mode)
- Download the GSI image from the OP
- fastboot flash system system-test-20190415-arm-a.img
- Boot to TWRP recovery
- Mount system partition
- Replace /system/build.prop with one from OP
- Reboot

Additionally, if you want to disable encryption:
- Format data partition (You will loose all of your data!)
- Download vendor image file from OP
- Extract default.prop and fstab.qcom
- Mount vendor partition
- Replace extracted files to phone
 
  • Like
Reactions: Briked-Matt

JonnyTech

Senior Member
Dec 4, 2013
133
46
You only need to touch vendor if you want to disable forced encryption.

These instructions worked when I posted them on 4pda:
- Unlock bootloader - there are instructions elsewhere
- Download: http://treble.phh.me/system-test-20190415-arm-a.img (system.img)
- Download TWRP from other thread (trwp.img)
- Download files.zip from my previous post and extract build.prop
- Power off the phone
- Press volume down and power buttons to go to fastboot bootloader
- Connect your phone to your computer via usb cable
- Type in terminal: fastboot flash system system.img
- Wait for process to finish
- Type in terminal: fastboot boot twrp.img
- Phone will reboot to TRWP recovery mode
- Select "Mount" then "System"
- Type in terminal: adb push build.prop /system/
- Type in terminal: adb shell chmod 600 /system/build.prop
- Reboot phone
 

JonnyTech

Senior Member
Dec 4, 2013
133
46
This is a Project Treble device which means that the drivers remain untouched in the /vendor partition and the new GSI uses them, unlike older ROMs which contained their own drivers. Which version of firmware did you have before installing the GSI? On 4pda it was observed that camera2 api apps was the issue but I have not seen any such problem.
 

JonnyTech

Senior Member
Dec 4, 2013
133
46
Just updated to the May 2019 build (v113) and all is good - just had to resize the image to fit the partition. I shall keep updating monthly as long as phh keeps making them.
 

LgPWN'd

Senior Member
Jan 18, 2019
257
81
I can't find a gsi that will fit my system partition
need the smallest GSI possible for an obscure mt6580 device

EDIT: would love to try the outdated image that's no longer available ANYWHERE
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Follow the instructions
    Files required to be download:
    Aosp 9:here
    build.prop: here
    Flash GSI with TWRP use this fix sd card not read in twrp here
    reboot to twrp by pressing power + volume up

    Perform a factory reset within TWRP. format data

    Download and extract system-arm-aonly-gapps-su.img.xz and you will get system-arm-aonly-gapps-su.img

    Transfer the system-arm-aonly-gapps-su.img from your PC to your device’s internal storage where TWRP can access it.

    Tap on “Install

    Change the type from “zip” to “image.

    Find and select the system-arm-aonly-gapps-su.img you downloaded.

    Choose to flash to the system partition

    no need to flash modified vendor
    Once that is done, reboot your device.
    Fix : performance copy the build.prop to system/

    Bugs: google certification (fix here) after registration clear the google apps data (framewrork/services)


    XDA:DevDB Information
    Aosp 9 Redmi Go, ROM for all devices (see above for details)

    Contributors
    samsungics1200, phhusson
    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    Based On: Aosp 9

    Version Information
    Status: Testing
    Current Beta Version: April 16 2019

    Created 2019-04-17
    Last Updated 2019-06-11
    1
    Instructions

    NOTE: Do not flash the vendor file from the OP, that causes bootloops on my device.

    This is what I did - now happily running AOSP 9:
    - Restore stock firmware (http://en.miui.com/download-365.html)
    - Reboot then perform system update to get latest release
    - Reboot to bootloader (fastboot mode)
    - Download the GSI image from the OP
    - fastboot flash system system-test-20190415-arm-a.img
    - Boot to TWRP recovery
    - Mount system partition
    - Replace /system/build.prop with one from OP
    - Reboot

    Additionally, if you want to disable encryption:
    - Format data partition (You will loose all of your data!)
    - Download vendor image file from OP
    - Extract default.prop and fstab.qcom
    - Mount vendor partition
    - Replace extracted files to phone
    1
    Update

    Hello to my Russian friends who are following this thread from http://4pda.ru/forum/index.php?showtopic=939092&view=findpost&p=84933744

    I have attached the files that need to be replaced to this post
    1
    The ROM from the original post is no longer available. If anyone is interested then I can make an updated GSI available.
    1
    Kyuunex said:
    Note: FM radio is missing

    Indeed, but the developer is on it, follow progress here: Include FM Radio app