[Redmi Note 3 [Mediatek] - Dead Phone - Solved - Guide]

[kayz73]

Hi,

For all those who have a dead Redmi Note 3 and not beed able to recover it yet, here is a simple guide which I have tried many times to bring life back to my RN3. Well, the solution is simple. I am using Win 7 64 bit edition.

First, use the SP-Flash-Tool-v5.1532.00 and install the latest stable fastboot ROM, but remember to "ENABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. If it boots, no need to go to next step. But if nothing happens, go to Next step.

Now download SP_Flash_Tool_exe_Windows_v5.1516.00 and install the same fastboot ROM, but remember, this time "DISABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. Your phone must vibrate and power ON after some seconds. Thats it. Here are some imp links if needed.

1. Install drivers and restart PC
https://mega.nz/#!DtIhzSiD!qLmplkvEQ-ZSegaGbpyMuzH198b90joNhkPkJa6hzWg

2. Download or use a OFFICIAL AND STABLE FASTBOOT ROM
http://bigota.d.miui.com/V7.1.6.0.L...HNCNCK_20160107.0000.12_5.0_cn_434e06a8a9.tgz

http://www.mediafire.com/download/zcc0vzca9o1xt5d/SP_Flash_Tool_v5.1532.zip

https://www.mediafire.com/?tpjg4jtdf7sj40t (SP_Flash_Tool_exe_Windows_v5.1516.00)

Thanks and courtesy of jamflux
http://en.miui.com/thread-221115-1-1.html

 

[vkeymi3]

will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL

 

[kayz73]

will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL

I hope it will work on any RN3.

 

[pahar]

Can I do the same for Redmi Note 3G?

 

[Leyrio]

Broken Link

Hello
The mega link doens´t work



Thanks

 

[cRaZyzMaN]

Hello
The mega link doens´t work



Thanks

https://www.androidfilehost.com/?fid=24052804347767433

 

[kapildubal]

redmi note 3 dead

My Redmi Note 3 (Mediatek), by mistake I erased completely using SPflash tool in "format all" mode.

now its not turning on (DEAD).
Symptoms:
1. Red light for first few minutes while charging after that red light goes off.
2. when red light turns off, my PC detects phone for a second.
3. Mediatek COM port goes on and off for few seconds.

Whats next?
can I recover my phone in this condition?
if yes then how?
how to deploy bootloader/Fastboot?
how to deploy ROM on this device?
are hennesey correct ROM for mediate device?
can I do the above procedure with my phone?

 

[hellowbd]

Thanx Dear

Its Working ..Lots Of Thanx:good:

 

[woprex]

use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder

WORKK 100000%

 

[smarterx]

use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder

WORKK 100000%

its work.. thanx a lot.. :good::good::good::good::

 

[user109]

May I know how long is the process? I waited for 15 mins and nothing happen, no "green" bar..

 

[KICK-BOXING]

​

 

[wowkabila5]

Allah Apnake er chay uttom bodla dan koruk vai