It appears if you flash trough (PC)Odin. But not if you flash trough CWM.
[REF] How to remove yellow triangle on any firmware with JIG
- Thread starter anonymous572
- Start date
Jig arrived from e-bay, followed steps exactly as instructed and success.
I'll admit it was scary on the initial boot-up delay.
Thanks!
I'll admit it was scary on the initial boot-up delay.
Thanks!
Me too! But all working as described THANKS to OP. Definitely worth the few pennies to buy this JIG.
There is a step missing from the instructions though, that is to plug the cable back in to the Phone and PC after step 9
Also, you should never remove the battery if still connected by cable to a power source including power drawn over USB.
I flashed tree times by PC Odin the XXKKA and CF-Root after and I never saw the color of triangle (nor triangle).
Im running an ICS ROM getting message
"could not locate hidden partition, Are you not running ics?
obviuosly iam and getting this message on 2 different ics roms, anyone advice
whats wrong?
"could not locate hidden partition, Are you not running ics?
obviuosly iam and getting this message on 2 different ics roms, anyone advice
whats wrong?
cant flash the second tar file
i can't load the second tar file, its getting failed.. please help me i cant boot my phone at all...
i can't load the second tar file, its getting failed.. please help me i cant boot my phone at all...
I think there is a problem with LP5 and LP6 leak. What is your ROM?
Redownload archive.
worked with a homemade JIG.
altought where all should be blank and with no sounds... there where sounds... the sound where the phone boots up the animation.
put the battery out and started where i left..
did someone try to pc odin flash a phone with a cable that has the jig resistors on it? does it increment the counter?
altought where all should be blank and with no sounds... there where sounds... the sound where the phone boots up the animation.
put the battery out and started where i left..
did someone try to pc odin flash a phone with a cable that has the jig resistors on it? does it increment the counter?
I'm getting this error:
<ID:0/012> Sbl.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
I think my NAND has the r/w problem described here:
http://forum.xda-developers.com/showthread.php?t=1457458
<ID:0/012> Sbl.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
I think my NAND has the r/w problem described here:
http://forum.xda-developers.com/showthread.php?t=1457458
could flashing this sbl cause the battery to be less lasting?
i've got now 8 hours in which 50% of battery has gone.
i've got now 8 hours in which 50% of battery has gone.
This sometimes happens after any flash. Go to the recovery and Wipe Battery Stats. After this reboot and charge you Note to 100%.
JIG is not required to update to ICS!
Once you are on ICS, just downgrade to Chain-fire Repack ICS leak ROM by installing it using PC ODIN.
Next install the TriangleAway.1.25.apk and run it. Check if the counter is set. If it is, select clear the counter button.
From there on you could install any ROMS from CWM bootscreen without increasing your counter.
It will work for Galaxy Note GT-N7000 model.
Say goodbye to the pesky yellow triangle!
More details here!
http://forum.xda-developers.com/showthread.php?t=1552554&page=504
Once you are on ICS, just downgrade to Chain-fire Repack ICS leak ROM by installing it using PC ODIN.
Next install the TriangleAway.1.25.apk and run it. Check if the counter is set. If it is, select clear the counter button.
From there on you could install any ROMS from CWM bootscreen without increasing your counter.
It will work for Galaxy Note GT-N7000 model.
Say goodbye to the pesky yellow triangle!
More details here!
http://forum.xda-developers.com/showthread.php?t=1552554&page=504
Last edited:
link at fist post.
Look at the thread name. There many other ways how to remove triangle without jig. Triangle Away works ONLY with CLP1. At CLP5 and CLP6 it won't work anymore. If you will downgrade you will need to wipe many times and may have unstable firmware after this.
The virginity of my Note has been restored and the evil triangle of doom is banished! 
Many thanks.
Great tool and precise guide.
Many thanks.
Great tool and precise guide.
Fu...kin hell!!!
I was scared to try this, but it works perfect and counter is reset, ur BIG MAN!!!
I was scared to try this, but it works perfect and counter is reset, ur BIG MAN!!!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone