[REF] How to remove yellow triangle on any firmware with JIG

[systemrun]

Thanks for the simple and effective steps.....Works like a charm first time I tried it. Thanks

 

[cesrameyca]

I was suffering for a little short time (a year for me) lol but WORKS GREAT!

 

[benzso63]

I don't have luck. I followed instructions through no.7, now my phone will not turn on at all. Now I don't know what to do , how do I boot up the phone, does anyone know, please help me. I tried hold volume down + center button + power button for 10-15 seconds, press volume up but no signs at all

---------- Post added at 03:35 AM ---------- Previous post was at 03:32 AM ----------

I think there is a problem with LP5 and LP6 leak. What is your ROM?


Redownload archive.

I can't boot up the phone at all, can someone help me please.

 

[benzso63]

Finally got it fixed. Between 7-10. The black screen scared me.

I don't have luck. I followed instructions through no.7, now my phone will not turn on at all. Now I don't know what to do , how do I boot up the phone, does anyone know, please help me. I tried hold volume down + center button + power button for 10-15 seconds, press volume up but no signs at all

---------- Post added at 03:35 AM ---------- Previous post was at 03:32 AM ----------



I can't boot up the phone at all, can someone help me please.

 

[dcoloane]

Please share with us what is your Version, LP5? LP6? and what you have done to boot up...........

 

[benzso63]

I have LP1. The scariest thing is once you hit no.7 your screen will go blank. And most people will think something wrong with the screen or phone is dead. I was frustrated. So basically you will need your imagination lol. When you remove the battery, once you put it back, hold the 3 buttons. Just start counting 15-20 secs. Then hit the volume up button. Connect your USB cable and run Odin, you will see the program detects the port , then you run 2.tar. Viola. Yellow Triangle is gone and your phone will boot up.

PS: I was thinking, ****! I need to buy another phone lol.

Please share with us what is your Version, LP5? LP6? and what you have done to boot up...........

 

[[opensys]]

Seams that with CLP5 modem the TriangleAway don't work so try usb JIG

But also fail with JIG, i tested 299k to 303k resistance values, the phone after 3 seconds goes to download mode all fine, but don't reset the counter
With 330k resistance will not go to download mode.

Any others options ?

Regards

 

[anonymous572]

Seams that with CLP5 modem the TriangleAway don't work so try usb JIG

But also fail with JIG, i tested 299k to 303k resistance values, the phone after 3 seconds goes to download mode all fine, but don't reset the counter
With 330k resistance will not go to download mode.

Any others options ?

Regards

Return to CLP1 ROM and reset using this way. After this you can flash CLP5 or CLP6 with mobile odin or cwm without touching your counter number.

 

[keeyie]

damn im so careless .. i did this to my s2 .. and now cannot boot at all!! can someone help ? or i nid to take back claim for warranty ? but the first step erasing the binary its work .. juz until last step .. it cant boot at all ..

---------- Post added at 08:11 AM ---------- Previous post was at 07:57 AM ----------

if i reflash stock rom can it been fix ?

 

[gspears]

Do you have a Jig? It's a small device you can plug into your phone and it puts it in download mode, then you can reload the correct rom. Do a search in the SGS2 threads if you don't know what I'm talking about.

 

[ghostami]

Felt like ages has passed during the process, but works like a charm

 

[KoekwousNL]

When I follow the "buy" link it says the following:

Unbrick Download 301K USB Mode JIG for Samsung T959/I9000/I897/M110S/I8700/I9100

Does this JIG also work for the GT-N7000 as mentioned in this topic? Little confusion here :$ Thanks in advance

 

[anonymous572]

When I follow the "buy" link it says the following:

Unbrick Download 301K USB Mode JIG for Samsung T959/I9000/I897/M110S/I8700/I9100

Does this JIG also work for the GT-N7000 as mentioned in this topic? Little confusion here :$ Thanks in advance

Jig has only one 301K microusb modification. All samsung phones are using the same jig.

 

[sjkoon]

Is WORK in LPY(ICS ROM).

i tried this method with XXLPY(4.0.3).
is nicely working. no Triangle!!

keep going.

 

[anonymous572]

i tried this method with XXLPY(4.0.3).
is nicely working. no Triangle!!

keep going.

Thanks for testing. I hope someone else will try it.

 

[korado]

i tried this method with XXLPY(4.0.3).
is nicely working. no Triangle!!

keep going.

what about counter,reseted or not

 

[The Stranger]

Yes it works fine...



Confirm, this method works for the new official ICS, my triangle is gone, binary reset to 0

Model:GT-N7000
Version:N7000XXLPY
Android 4.0.3
Date:2012 May
Open Germany

 

[a_halodri]

Yes it works !
5 Stars!!!!!!!!!

 

[kvsandeepreddy]

works with lpy!!! thanks bro +1 added

 

[amberaul]

remove yellow triangle without jig

http://www.youtube.com/watch?v=YOXNf_kH-iA&feature=related