[REF] How to remove yellow triangle on any firmware with JIG

[anonymous572]

Nothing, is not responding

Try to remove the battery, than put it back. Hold volume down + center button + power button for 6 seconds after this quickly release the fingers from buttons and press volume up once. Try to connect to computer. If not helped - try another computer.

 

[poolakkal Suresh]

Thanks buddy, my yellow triangle is gone for a task.
I think people get worried from at step 7 onwards since screen doesn't work. you need to emphasise on that with still more bigger fonts.

 

[Chaiwat_41]

Gret a 3 count of my not is gone
THX

 

[MihAoo3k]

Hi,

I tried to remove triangle, and after install 1.tar my screen went black, then I turn phone off, and now I cant turn it on. When I trying to turn it on, connect to PC to charge battery - nothing happen. Is any chance to get back my phone?

 

[anonymous572]

Hi,

I tried to remove triangle, and after install 1.tar my screen went black, then I turn phone off, and now I cant turn it on. When I trying to turn it on, connect to PC to charge battery - nothing happen. Is any chance to get back my phone?

Read my 2 last posts at this thread. Carefully read first page and all instruction and FAQ. If you flash 1.tar - you screen must be black and non working. I wrote about this many times.

 

[MihAoo3k]

Thanks for quick reaply. Works great:

Try to remove the battery, than put it back. Hold volume down + center button + power button for 6 seconds after this quickly release the fingers from buttons and press volume up once. Try to connect to computer. If not helped - try another computer.

 

[BobbyHenceMcGee]

Genious!
Worked like a charm first go, no triangle and custom counter reset to 0 with "samsung official" firmware stated.
Just follow the instructions word for word, too easy.
Thanks

---------- Post added at 06:29 PM ---------- Previous post was at 06:28 PM ----------

Gret a 3 count of my not is gone
THX

Huh?

 

[stesteste]

Huh?[/QUOTE]

Gret a 3 count of my not is gone
THX

i think he meant,,,, great my counter was on 3 now it is on zero lol

 

[qnet]

Thanks to the OP. I just got my jig today, followed your procedure and it worked.

 

[tornado75]

great procedure i used on latest ICS firmware LPF and it works 100%

 

[anonymous572]

Updated first post! Now ZSLPF is supported too!

 

[incisivekeith]

I have a soft-bricked phone - I can get into download mode and recovery mode. I was able to get rid of the yellow triangle by flashing a stock kernel, but the flash counter has gone up by 2. Is it possible for me to flash your tar 2 to reset the counter to 0? I don't have a jig and want to avoid using it, as I don't have much time to wait for buying it and using it. Thanks.

 

[sutekidane]

Updated first post! Now ZSLPF is supported too!

Just tried it on LPF. It resetted the binary counter back to zero. Thanks so much!

 

[anonymous572]

Is it possible for me to flash your tar 2 to reset the counter to 0?

Only with JIG.

 

[korado]

I have a soft-bricked phone - I can get into download mode and recovery mode. I was able to get rid of the yellow triangle by flashing a stock kernel, but the flash counter has gone up by 2. Is it possible for me to flash your tar 2 to reset the counter to 0? I don't have a jig and want to avoid using it, as I don't have much time to wait for buying it and using it. Thanks.

look HERE,maybe u find a jig location nearby

 

[saggydog]

Updated first post! Now ZSLPF is supported too!

Thanks it works not more yellow triangle I lost my root access when flashing Midteam 1.3... following your advice in maxicet thread helps thanks for the advice

 

[incisivekeith]

look HERE,maybe u find a jig location nearby

Thanks, korado. As I mentioned, though, I am out of time to spend on obtaining the jig and using it - my two weeks from the purchase will be over next week, so I need to either fix my phone by any method readily available using Odin or stock CWM, or send it back to Samsung within 15 days of purchase for an exchange (maybe).

Is there no method to reset the flash counter without a jig or any other hardware?

 

[anonymous572]

Is there no method to reset the flash counter without a jig or any other hardware?

Only one - flash ZCLP1 and use Triangle Away app.

 

[incisivekeith]

Only one - flash ZCLP1 and use Triangle Away app.

ZCLP1 kernel? As for Triangle Away app, I do not have a working OS on the phone, as I mentioned. I have the download mode and the stock recovery mode.

The stock recovery mode doesn't show any files in my SD card, while other recoveries do.

 

[anonymous572]

ZCLP1 kernel?

ZCLP1 ROM.

There are only two ways to reset binary counter. Nothing else.