[REF] How to remove yellow triangle on any firmware with JIG

stesteste · May 20, 2012 at 3:14 PM

i got rocket rom lpy and lpf kernal do i use tar 1 and tar 2 and not the szlff tar thanks

anonymous572 · May 20, 2012 at 3:52 PM

stesteste said:
i got rocket rom lpy and lpf kernal do i use tar 1 and tar 2 and not the szlff tar thanks

1.tar you need for resetting anyway. 2.tar is for LPY because your rom is not LPF.

sblop · May 20, 2012 at 6:40 PM

Is the LPF file broken? - I used it on the a LPF rom, and now I can't make the display turn back on, no matter what I try. - I tried to open the 2-ZSLPF.tar in 7zip and it reports the archive is broken. I then tried downloading it again and I get the same error. - If so, then what do I do. When I try to put the phone in download mode windows claims it is a unknown device, and I can't force it to use the correct driver.

The phone makes a startup sound, so it isnt completely dead, but that is about all I get. No download mode, and not display in the recovery, so I can't see what I am doing.

Any advice is received with gratitude.

anonymous572 · May 20, 2012 at 6:52 PM

sblop said:
Is the LPF file broken? - I used it on the a LPF rom, and now I can't make the display turn back on, no matter what I try. - I tried to open the 2-ZSLPF.tar in 7zip and it reports the archive is broken. I then tried downloading it again and I get the same error. - If so, then what do I do. When I try to put the phone in download mode windows claims it is a unknown device, and I can't force it to use the correct driver.

The phone makes a startup sound, so it isnt completely dead, but that is about all I get. No download mode, and not display in the recovery, so I can't see what I am doing.

Any advice is received with gratitude.

What section at Odin you choose for 2-ZSLPF.tar? PDA? BOOTLOADER?

anonymous572 · May 20, 2012 at 6:55 PM

sblop said:
When I try to put the phone in download mode windows claims it is a unknown device, and I can't force it to use the correct driver.

Use another computer or reinstall drivers.

sblop · May 20, 2012 at 6:55 PM

anonymous572 said:
What section at Odin you choose for 2-ZSLPF.tar? PDA? BOOTLOADER?

pda

anonymous572 · May 20, 2012 at 6:57 PM

sblop said:
pda

Please look carefully at first post. You MUST choose BOOTLOADER.

Try to remove the battery, than put it back. Hold volume down + center button + power button for 6 seconds after this quickly release the fingers from buttons and press volume up once. After this connect USB and start Odin.

sblop · May 20, 2012 at 7:00 PM

stesteste said:
i got rocket rom lpy and lpf kernal do i use tar 1 and tar 2 and not the szlff tar thanks

****. didnt see it should be a bootloader flash... now what then?

---------- Post added at 07:57 PM ---------- Previous post was at 07:57 PM ----------

anonymous572 said:
Please look carefully at first post. You MUST choose BOOTLOADER.

any advise how to proceed?

---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------

anonymous572 said:
Please look carefully at first post. You MUST choose BOOTLOADER.

Try to remove the battery, than put it back. Hold volume down + center button + power button for 6 seconds after this quickly release the fingers from buttons and press volume up once. After this connect USB and start Odin.

Already tried this. Windows doesnt recognice the device.

anonymous572 · May 20, 2012 at 7:04 PM

sblop said:
Already tried this. Windows doesnt recognice the device.

Uninstall kies and try install only drivers, put usb to another usb output. Here is drivers (put numbers and press enter to download).
If not helped try another PC and this drivers.

sblop · May 20, 2012 at 7:49 PM

anonymous572 said:
Uninstall kies and try install only drivers, put usb to another usb output. Here is drivers (put numbers and press enter to download).
If not helped try another PC and this drivers.

I simply can't make windows see the device. It pops up, but won't even accept the drivers when I force the correct drivers. :-/

anonymous572 · May 20, 2012 at 7:55 PM

sblop said:
I simply can't make windows see the device. It pops up, but won't even accept the drivers when I force the correct drivers. :-/

This can be windows problem, but also can be because you flash PDA, not BOOTLOADER. Try to remove battery, than back. And press power button for 5 seconds. Wait till android boot and connect usb. MTP connection works? Do you see the N7000 icon with Internal and External memory at your computer?

sblop · May 20, 2012 at 8:05 PM

anonymous572 said:
This can be windows problem, but also can be because you flash PDA, not BOOTLOADER. Try to remove battery, than back. And press power button for 5 seconds. Wait till android boot and connect usb. MTP connection works? Do you see the N7000 icon with Internal and External memory at your computer?

When I start the device "normally" I get boot sound. Then when I connect the cable it installs the driver for mobile modem and the composite device. Both succesfully.
MTB driver install fails, even though it has the correct driver. It can't start the connection, windows writes.

anonymous572 · May 20, 2012 at 8:13 PM

sblop said:
When I start the device "normally" I get boot sound. Then when I connect the cable it installs the driver for mobile modem and the composite device. Both succesfully.
MTB driver install fails, even though it has the correct driver. It can't start the connection, windows writes.

Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question.

You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

sblop · May 20, 2012 at 8:36 PM

anonymous572 said:
Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question. You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

Thanks for the advice. I will try this tomorrow. Damit, I did not see the instructions were diffrent for the LPF file. Thanks for your advice.

sblop · May 20, 2012 at 10:54 PM

anonymous572 said:
Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question. You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

I called a friend who brought his computer, and this solved the problem. Thanks for the help!

battletank · May 21, 2012 at 11:08 AM

I'm using the following on my Note:

XXLPY Rom
ZSLPF Bootloader, Kernel and Radio

As I have the LPF bootloader, I assume I should follow the instructions for ZSLPF?

Thanks for any advice!

bkeaver · May 21, 2012 at 11:11 AM

battletank said:
I'm using the following on my Note:

XXLPY Rom
ZSLPF Bootloader, Kernel and Radio

As I have the LPF bootloader, I assume I should follow the instructions for ZSLPF?

Thanks for any advice!

yes follow the instructions in the OP just make sure when you flash the 2.tar file that you flash is in odin as a bootloader not in the pda, it wont hurt I dont think if you did it just wouldnt do what its supposed to do until you did. It worked like a charm on mine...

anonymous572 · May 21, 2012 at 1:34 PM

bkeaver said:
yes follow the instructions in the OP just make sure when you flash the 2.tar file that you flash is in odin as a bootloader not in the pda, it wont hurt I dont think if you did it just wouldnt do what its supposed to do until you did. It worked like a charm on mine...

Not 2.tar!!! Please look carefully at first post. If your bootloader ZSLPF you need this tar to flash 2-ZSLPF.tar.

bkeaver · May 21, 2012 at 1:42 PM

anonymous572 said:
Not 2.tar!!! Please look carefully at first post. If your bootloader ZSLPF you need this tar to flash 2-ZSLPF.tar.

I hate to tell you this but I did use the 2.tar file and I was on LPF and it removed and reset my counter!

anonymous572 · May 21, 2012 at 2:01 PM

bkeaver said:
I hate to tell you this but I did use the 2.tar file and I was on LPF and it removed and reset my counter!

If you did it, now you have old gingerbread\betaics bootloader.

[REF] How to remove yellow triangle on any firmware with JIG

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member