after the screen gets black i can't enter in dowload mode, i followed all the steps but odin doesn not reconize my device and i can't flash the second file..how can i solve it?!
Last edited:
[REF] How to remove yellow triangle on any firmware with JIG
- Thread starter anonymous572
- Start date
done, i installed again kies and drivers and now odin reconizes it, BUT i can't flash it anyway..it says 0:[COM4] "<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
"
it's in download mode the device...
It seems the problem with your computer. Try another computer.
that's weird..it has been worked always perfectly..
edit: i tried again with my pc and it has worked finally! =) ty!
Last edited:
Hi to all.
If someone needs it, i've translated this wonderful tutorial in italian.
You can find it here
Hope it helps.
If someone needs it, i've translated this wonderful tutorial in italian.
You can find it here
Hope it helps.
Only one question. Why "non garantito al 100%"???
My tutorial is 100% safe and 100% works.
UPDATED TUTORIAL, must be no problems now.
Last edited:
Sorry for my mistake...corrected immediatly...i was very tired when i wrote the article...i've correct it...sorry againOnly one question. Why "non garantito al 100%"???
My tutorial is 100% safe and 100% works.
UPDATED TUTORIAL, must be no problems now.
Wow!!!
Thanks for adding link to my translation and my website in your first post!!!
Chainfire did it again.
Check this out. http://forum.xda-developers.com/showthread.php?t=1494114.
I tried and it worked...
Big Thanks to Chainfire again.
Check this out. http://forum.xda-developers.com/showthread.php?t=1494114.
I tried and it worked...
Big Thanks to Chainfire again.
how long do u have to wait it booted into galaxy note with yellow triangle sreen for 3 mins now how long is the process thanks need quick reply
---------- Post added at 01:52 PM ---------- Previous post was at 01:03 PM ----------
**** went to this link and instyalled triangle away now think i bricked its sgs2 link didnt even look what now
update
had to install gb rom through pc odin then reroor then nandriod backup my saved rom we need to know which kernal to use so far it hasnt worked on my speedmod k3.3 or franco r5 or cfroot on rrv4.1 long process and also added 1 more count lol
Last edited:
100% works for all Gingerbread & ICS ROMs except the ZCLP5 & ZCLP6 leaks.
Works with new XXLPY and ZSLPF (4.0.3) ROM
Italian translate by Willy89
1) You need a JIG. You can buy it or create its own
2) Download attached zip archive and extract it to some folder
3) Reboot you device in download mode - turn it off, than hold volume down + center button + power button. Wait for the warning message and press volume up
4) Plug it to you PC
5) Start Odin from extracted folder and choose '1.tar' file for PDA flash. You must get the same settings:
6) Press Start and wait for the completion of the flashing
7) After reboot you should get black screen. Unplug USB from PC. Long press power button (15-20 seconds). Remove battery for 5 seconds, plug in JIG, put battery back. Wait for 40 seconds, press power button for 5 seconds, remove JIG, long press power button (15-20 seconds), remove battery
8) Put battery back, hold volume down + center button + power button for 10-15 seconds, press volume up, plug it to you PC
9)
10) Press Start and wait for the completion of the flashing
At points 7-10 the screen will not work!
After these steps you will get:
- No yellow triangle
- Custom binary download value will set to 'NO'
- Current binary value will set to 'SAMSUNG OFFICIAL'
FAQ
Will it work for new stock gingerbread, ics, custom, cyanogen, miui and other firmware?
All gingerbread ROMs and ICS except CLP5 and CLP6 (some users report about incompatibility). Better don't use this reset counter instruction if you have those ICS ROMs.
Do I need root for this?
No.
Does not work, yellow triangle is not disappeared!
Carefully follow all 10 points of instruction.
I am having trouble, black screen after a 10th point!
Try reboot your device. Remove battery for 10 seconds and plug it back.
Odin can't recognize USB plug at 4 or 8 point. + Windows can't detect device or identifies as "Unknown device".
Try another USB port. Try reinstall kies or remove it and install only galaxy note drivers (link1, link2). If not helped try another PC.
Will this work on the Galaxy S2 or Galaxy Nexus?
No! You will break your phone. Works and tested for GT-N7000 and GT-I9220.
Will this work on the SGH-I717 (AT&T)?
Not tested yet.
Will I have a problem with a warranty? Can they identify the use of this counter reset?
There is absolutely no chance to detect this binary reset at service center.
I gotta give it to you brother.. you saved me from a whole lot of pain searching for resetting my bricked GNote. Thanks a bunch mate. I love ya...
This seems to have hard bricked my phone. I successfully flashed the 1.tar file, but phone would not reboot afterwards.
Edit: My error. I failed to read carefully where it the directions said the screen wouldn't work it steps 7-10.
Edit: My error. I failed to read carefully where it the directions said the screen wouldn't work it steps 7-10.
Last edited:
I was s*** scared when during the non working of the screen the phone just wont boot into android recovery (thinking of the hardbrick issue even though it has nothing to do with it...) but then it flashed right and voila!! So so relieved.... I just wish there was something visible happening and easier... Anyways it did reset and yellow triangle is gone!! Thanks!! (I am on LP8 official with k3-3)....
Will i have to do this everytime after i flash anything? Or the fix is permanent?
This tutorial is only how to remove yellow triangle and reset firmware counters. If you flash unofficial rom or kernel with PC odin triangle appears.
It was very scary.
Step 10 took the longest of time but it worked.
Glad I didn't unplug or reset the phone.
Thanks for the step by step instructions.
Very clear and detailed.
Using Build DXLC2
Baseband N7000DXLC1
Kernal speedmod k2-12
Step 10 took the longest of time but it worked.
Glad I didn't unplug or reset the phone.
Thanks for the step by step instructions.
Very clear and detailed.
Using Build DXLC2
Baseband N7000DXLC1
Kernal speedmod k2-12
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone