- Jun 12, 2011
PLEASE DON'T QUOTE THE OP!!
***Below is a collection of stock partition img's donated by several forum members and myself, for Verizon vs985 LG G3 only.
***Some other less important partitions are linked for the dev's (where available), please don't use them, unless you know what your flashing.
Modem.img Baseband ends with "ZM-1" (not the same as 23B)
Other misc img's
Modem.img Baseband ends with "ZM-1.01647290.4254.1"
Modem.img Baseband ends with "ZM-1.7834.1"
System.img (use 18.104.22.168 twrp or equal/greater when flashing this)
~23B~ Lollipop (leak build)
Modem.img Baseband: VS985-MPSS.DI.2.0.1.c1.13-00053-M8974AAAAANPZM-1
System.img This is Not a flashable zip, extract to get the img file.
***md5's provided by @roirraW "edor" ehT here.
~23C~ Lollipop (official)
the baseband version is the same as 23B above.
the system.rar is from the UP file and rooted.
the system from kdz is clean, unrooted.
the bumped boot is from the UP file
when i get official rooted system and bumped boot from the kdz files, i will replace them.
ALL the other files are pulled from the kdz.
***Note, Do Not use the flash2 method to go from KK to L.
Partitions other than boot, system and modem need to be updated, otherwise, you will have no download mode, and other possible issues.
***A tutorial to install the Boot, Modem, and System, using @autoprimes "Flash2" method, can be found Here.
***Custom recovery "flashable zips" for boot and modem by @hsbadr can be found here.
~How to pull the img's off your device~ (and send them to me )
In Terminal Emulator, type:
su dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/sdcard/aboot.img dd if=/dev/block/platform/msm_sdcc.1/by-name/sbl1 of=/sdcard/sbl1.img dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/system.img dd if=/dev/block/platform/msm_sdcc.1/by-name/recovery of=/sdcard/recovery.img dd if=/dev/block/platform/msm_sdcc.1/by-name/rpm of=/sdcard/rpm.img dd if=/dev/block/platform/msm_sdcc.1/by-name/tz of=/sdcard/tz.img dd if=/dev/block/platform/msm_sdcc.1/by-name/laf of=/sdcard/laf.img
***Some will take several minutes to complete.
~DD Code for flashing img's~
Do Not use DD code to flash img's, unless you know how it works, and why exactly you need to use it.
Improper use of DD code could cause a hard brick. Consider this your warning.
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/* dd if=/sdcard/**.img of=/dev/block/platform/msm_sdcc.1/by-name/* * Partition name ** Partition img file
~Credits for files and tutorials~
@roirraW "edor" ehT
if i forgot to mention you, pm me a link to your post.
Thanks to all the contributors that made this post possible.