NOTE:
This method must have special expertise for hardware, if you don't understand this, don't do it, because it will cause your device to be totally damaged !!!
For those who have problems stuck in fastboot with locked bootloader, or hard bricked due to software update errors, such as corrupted device notifications and the like follow the following tutorial to fix.
Here I managed to find a test point on the LG G5 as a savior of our device from death.
Tools:
1. QPST
2. LGUP
3. Driver LG and 9008
4. KDZ Firmware
5. LG Firmware Extractor
6. Filehorse G5 and Test Point
How To:
1. Install the QPST
2. Install the LG Drivers
3. Install the LGUP
4. Extract KDZ using LG Firmware Extractor to DZ and DZ to BIN
5. Disassembly your phone
6. Short test point and hold
7. Connect USB to PC
8. Remove the test point holder once EDL 9008 mode is connected
9. Open QPST, Set to UFS
10. Open partition manager in QPST and load image (bin) for all partition
11. Disconnect when everything is finished and turn on the phone, it will automatically enter download mode
12. Flash KDZ with LGUP
13. And finish (your phone life again)
For other question contact me on Telegram ronnayryukay_official
Sorry I can't explain it more fully, because of my local internet network limitations to make a video.
This method must have special expertise for hardware, if you don't understand this, don't do it, because it will cause your device to be totally damaged !!!
For those who have problems stuck in fastboot with locked bootloader, or hard bricked due to software update errors, such as corrupted device notifications and the like follow the following tutorial to fix.
Here I managed to find a test point on the LG G5 as a savior of our device from death.
Tools:
1. QPST
2. LGUP
3. Driver LG and 9008
4. KDZ Firmware
5. LG Firmware Extractor
6. Filehorse G5 and Test Point
How To:
1. Install the QPST
2. Install the LG Drivers
3. Install the LGUP
4. Extract KDZ using LG Firmware Extractor to DZ and DZ to BIN
5. Disassembly your phone
6. Short test point and hold
7. Connect USB to PC
8. Remove the test point holder once EDL 9008 mode is connected
9. Open QPST, Set to UFS
10. Open partition manager in QPST and load image (bin) for all partition
11. Disconnect when everything is finished and turn on the phone, it will automatically enter download mode
12. Flash KDZ with LGUP
13. And finish (your phone life again)
For other question contact me on Telegram ronnayryukay_official
Sorry I can't explain it more fully, because of my local internet network limitations to make a video.
Last edited:
