Hello,
A few weeks ago, I replaced my screen because my smartphone had fallen. When disconnecting the antenna cable, the coax connection on the PCB was broken. So I ordered a new PCB. However, with the new PCB, I no longer have any coverage. Is it possible that the PCB is not suitable for the European / Belgian network (GSM/Edge/3g/lte). I also noticed that the PCB I received differs a lot from the design that was in my smartphone. The PCB under the smartphone is the defective PCB, the mounted PCB is the PCB is the new PCB. You can find a picture here: https://imgur.com/Wzmq0p0 When my broken screen was still on the smartphone, I had full range and there was nothing wrong with the network. The connections of the cable is also not damaged: https://imgur.com/H4WkFmA Screenshot of no coverage, but SIM card data that is read: https://imgur.com/tkOhXI9 I tested 2 sim cards that I in the Pocophone. Both are from another provider. Neither got a signal. In my other smartphone, both SIM cards were connected to the network and worked as expected. Does somebody know if I ordered the wrong PCB foe Belgium?
A few weeks ago, I replaced my screen because my smartphone had fallen. When disconnecting the antenna cable, the coax connection on the PCB was broken. So I ordered a new PCB. However, with the new PCB, I no longer have any coverage. Is it possible that the PCB is not suitable for the European / Belgian network (GSM/Edge/3g/lte). I also noticed that the PCB I received differs a lot from the design that was in my smartphone. The PCB under the smartphone is the defective PCB, the mounted PCB is the PCB is the new PCB. You can find a picture here: https://imgur.com/Wzmq0p0 When my broken screen was still on the smartphone, I had full range and there was nothing wrong with the network. The connections of the cable is also not damaged: https://imgur.com/H4WkFmA Screenshot of no coverage, but SIM card data that is read: https://imgur.com/tkOhXI9 I tested 2 sim cards that I in the Pocophone. Both are from another provider. Neither got a signal. In my other smartphone, both SIM cards were connected to the network and worked as expected. Does somebody know if I ordered the wrong PCB foe Belgium?