• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[REQ] Toshiba folio 100 BCT and partition dumps

Search This thread

puppet13th

Senior Member
Apr 9, 2011
498
904
Medan
this is working nvflash for Toshiba Folio 100

this will bring life for bricked Toshiba Folio 100(in APX mode)
may be this can be reference to create a working solution for full system recovery

!!! Warning !!!
this will not make your device back to usable state


Working :
- bootloader (toshiba logo)
- fastboot
- working boot and recovery if flashed from nvflash or fastboot

still confusing : partition table layout

we need manualy made parition table using fdisk command from cwm recovery

i have made script for creating partition on /dev/block/mmcblk0 using parameter found on part.txt

the partition table still need to be adjusted

files :

folio.bct - downloaded from xda
new.bct - downloaded form my folio 1000 (don't know if it's the right bct)
bootloader.bin - downloaded from xda
folio100.xls - my summary about partition table on folio 100 and ac100
env.cmd - start command prompt with adb,fastboot and nvflash support
flash.cfg - i created this config file based on my summary
part.txt - fdisk partition parameter
part-table.txt - partition table after created
NVFlash.txt - nvflash documentation
cwm-fdisk.cmd - make partition table using adb shell on CWM Recovery mode

need to download recovery.img for working nvflash script

http://forum.xda-developers.com/showthread.php?t=923722
http://forum.xda-developers.com/showthread.php?t=1065009

in flash.cfg i have place recovery.img as image for linux and recovery,after fresh flash from nvflash the device should booting to recovery

Hacking the Toshiba AC100
http://tosh-ac100.wetpaint.com/

download : nvflash-folio100.zip

APX recovery mode : on toshiba logo press power 4x + vol-
fastboot mode : on toshiba logo press power 3x + vol-
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    this is working nvflash for Toshiba Folio 100

    this will bring life for bricked Toshiba Folio 100(in APX mode)
    may be this can be reference to create a working solution for full system recovery

    !!! Warning !!!
    this will not make your device back to usable state


    Working :
    - bootloader (toshiba logo)
    - fastboot
    - working boot and recovery if flashed from nvflash or fastboot

    still confusing : partition table layout

    we need manualy made parition table using fdisk command from cwm recovery

    i have made script for creating partition on /dev/block/mmcblk0 using parameter found on part.txt

    the partition table still need to be adjusted

    files :

    folio.bct - downloaded from xda
    new.bct - downloaded form my folio 1000 (don't know if it's the right bct)
    bootloader.bin - downloaded from xda
    folio100.xls - my summary about partition table on folio 100 and ac100
    env.cmd - start command prompt with adb,fastboot and nvflash support
    flash.cfg - i created this config file based on my summary
    part.txt - fdisk partition parameter
    part-table.txt - partition table after created
    NVFlash.txt - nvflash documentation
    cwm-fdisk.cmd - make partition table using adb shell on CWM Recovery mode

    need to download recovery.img for working nvflash script

    http://forum.xda-developers.com/showthread.php?t=923722
    http://forum.xda-developers.com/showthread.php?t=1065009

    in flash.cfg i have place recovery.img as image for linux and recovery,after fresh flash from nvflash the device should booting to recovery

    Hacking the Toshiba AC100
    http://tosh-ac100.wetpaint.com/

    download : nvflash-folio100.zip

    APX recovery mode : on toshiba logo press power 4x + vol-
    fastboot mode : on toshiba logo press power 3x + vol-
    2
    I have installed Gentoo Linux on the Folio and am dumping the whole internal sdmmc right now.

    We can extract the BCT and stuff from it later :)
    2
    Hi,

    I have extracted the BCF from the folio.
    Also the first 10MB of the internal sdmmc are in the attachment.

    If I understand this corretly the BCT is the bootloader.

    Can you try:

    nvflash.exe --bct bootloader.bin --setbct --bl bootloader.bin --configfile
    flash.cfg --odmdata 0x000c0075 --create --go

    with the bootloader.bin inside my zip?


    Sorry, the BCT is something different. I will try to extract it...

    Update: I have also extracted the BCT. Please see attached zip.
    1
    I have somehow messed up my folio 100, and its BCT and bootloader information.

    So im hoping someone else with little experience, knows how to use the nvflash utilities and dump the information for me and send me a link on where to get it.

    the combo to get into bootloader mode is: POWER button pressed 4 times + VOL- key and it will go into bootloader mode.
    1
    I dumped the partitions which are visible from android already. Don't quite know what got resentment with your key sequence - DATA wiped? Some of the preloaded apps are broken now, but they were a bit broken before.

    so you mean, you can extract all partitions from a shell?
    ie. bootloader of partition2 and so forward?

    i didnt notice that all 8 partitions were accessable there?
    can you upload the dump of them somewhere?