• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Was this useful and you were satisfied with the outcome...?


  • Total voters
    243
Search This thread

Dante63

Senior Member
Nov 1, 2015
1,849
1,605
28
the Clouds
Samsung Galaxy Note 20 Ultra
by any chance,do you know which ( active 2 ) csc have the spo2 enabled ?
Honestly speaking I would like to apologize as I was busy and in a rush I didn't notice the watch model, as far as I know, SpO2 never came for active 2 even though active 2 has the hardware to do it...

Still the rest is the same, SpO2 is part of Samsung Health app on the watch though...
Will this work on stock ROM with tripped Knox, please?
Works on everything...
 

AtoZ0to9

Senior Member
Jul 27, 2007
9,636
3,011
Mississippi
www.google.com
OnePlus 5T
Ok, so I did the old mod. Like a year ago old mod, before the BP was even released anywhere. And it's a OnePlus phone so I remember using Tizen studio and signing the .tpk and pushing it to the watch? How do I undo all of that so I can do this mod? Reset watch? I remember seeing an adb command to remove the old .tpk I think?
 

ahmed.ismael

Senior Member
Oct 14, 2015
2,442
1,252
None. Watch Active 2 does NOT have any known official / beta / leaked / workaround support for SpO2 monitoring as of today.

Honestly speaking I would like to apologize as I was busy and in a rush I didn't notice the watch model, as far as I know, SpO2 never came for active 2 even though active 2 has the hardware to do it...

Still the rest is the same, SpO2 is part of Samsung Health app on the watch though...
thanks
i had hopes i can enable it
 

czmikongithub

Member
Jan 8, 2021
9
3
Honestly speaking I would like to apologize as I was busy and in a rush I didn't notice the watch model, as far as I know, SpO2 never came for active 2 even though active 2 has the hardware to do it...

Still the rest is the same, SpO2 is part of Samsung Health app on the watch though...

Works on everything...
Thank you. SHM is ok, but I'm in trouble with SH. Is it also patched? I have used Samsung Health 6.17.0.019.apk and Samsung Accessory Service 3.1.94 (min SDK15).apk from GD (link in OP), but SH still says, that device was modified and can not run. I also tried version Samsung Health 6.16.0.047 (min SDK26).apk, but same problem. Is there any chance to run SH on S8 with tripped knox?
 

Neeschar

Member
Jul 21, 2017
34
20
Ok, so I did the old mod. Like a year ago old mod, before the BP was even released anywhere. And it's a OnePlus phone so I remember using Tizen studio and signing the .tpk and pushing it to the watch? How do I undo all of that so I can do this mod? Reset watch? I remember seeing an adb command to remove the old .tpk I think?

Watch the video from the op and go for "6:15 If method 1 failed, step to method 2".
If thats not working or anything like that, a reset is needed but it will delete all your data.
 

Dante63

Senior Member
Nov 1, 2015
1,849
1,605
28
the Clouds
Samsung Galaxy Note 20 Ultra
Ok, so I did the old mod. Like a year ago old mod, before the BP was even released anywhere. And it's a OnePlus phone so I remember using Tizen studio and signing the .tpk and pushing it to the watch? How do I undo all of that so I can do this mod? Reset watch? I remember seeing an adb command to remove the old .tpk I think?
You can long press the app on your watch and it will show "-" on it for uninstall, alternatively, you can open galaxy wearables and go to apps then manage apps, uninstall the app you ported to your watch...
Thank you. SHM is ok, but I'm in trouble with SH. Is it also patched? I have used Samsung Health 6.17.0.019.apk and Samsung Accessory Service 3.1.94 (min SDK15).apk from GD (link in OP), but SH still says, that device was modified and can not run. I also tried version Samsung Health 6.16.0.047 (min SDK26).apk, but same problem. Is there any chance to run SH on S8 with tripped knox?
I failed to edit and modify SH but for knox tripped devices, build.prop in system path, edit it and look for "ro.config.tima" it's gonna be "1", change it to "0", reboot your phone and you will be able to use SH...
 
  • Like
Reactions: AtoZ0to9

czmikongithub

Member
Jan 8, 2021
9
3
You can long press the app on your watch and it will show "-" on it for uninstall, alternatively, you can open galaxy wearables and go to apps then manage apps, uninstall the app you ported to your watch...

I failed to edit and modify SH but for knox tripped devices, build.prop in system path, edit it and look for "ro.config.tima" it's gonna be "1", change it to "0", reboot your phone and you will be able to use SH...
Thanks for the reply, but I wrote, that I'm on stock ROM (no root, no custom recovery). So, I can't see any method how it is possible to edit build.prop. Everything what I found on internet about editing build.prop requires root permisions. So, it seems, that it's not solution for me :-( Any other idea? :)
 

ozzybourn1

New member
Jun 21, 2021
1
0
Hola alguno me ayuda a quitar la cuenta google de un celular que me regalaron? es un s8 plus y su version de es
Samsung Galaxy S8 + (SM-G955F) G955FXXSBDTJ4 esta bloqueada por una cuenta google, no la se y busque hacer downgrade y no pude, no encuentro el firmaware android 7.0 para poder usarlo, alguno de ustedes sea tan amable de pasarme el link porfavor por mensaje privado o alguna manera de ayudarme muchisimas gracias
 

chrizzle30

Member
Apr 4, 2009
9
6
I followed the instructions exactly as presented and could not get the BP.tpk to install. I think the BP in your Google Drive is bad or bugged. Was able to obtain the BP from the below forum post and that worked for me after signing it.

 

Neeschar

Member
Jul 21, 2017
34
20
I followed the instructions exactly as presented and could not get the BP.tpk to install. I think the BP in your Google Drive is bad or bugged. Was able to obtain the BP from the below forum post and that worked for me after signing it.

U mean, the push to the watch didnt worked? Had that issue and its simple: activate the option "install from other sources" on your watch.
 
Last edited:

Neeschar

Member
Jul 21, 2017
34
20
Hola alguno me ayuda a quitar la cuenta google de un celular que me regalaron? es un s8 plus y su version de es
Samsung Galaxy S8 + (SM-G955F) G955FXXSBDTJ4 esta bloqueada por una cuenta google, no la se y busque hacer downgrade y no pude, no encuentro el firmaware android 7.0 para poder usarlo, alguno de ustedes sea tan amable de pasarme el link porfavor por mensaje privado o alguna manera de ayudarme muchisimas gracias
False language, false thread.

Read some threads about flash, recovery and so on, here on xda. After that, comment or create a thread if u are unsure or didnt find your answer. To flash another system on it, u need unlocked
bootloader and thats only working if usb debugging is on and adb can find your device.

Without that, u got just 1 chance and thats flash over fastboot. Thats risky and just
success if u find a program for it and an image that can be flashed via fastboot.

Be carefull, flashing is always risky. Read read read .... is important.
 
  • Like
Reactions: Dante63

hossam.salah

Member
Apr 18, 2011
36
1
any idea how can i install the BP app to my watch
i have ECG running so far so good now and i'm really happy with the outcome
while installing the BP app it gives a success message on the phone but after a while it says failed to install on the watch and i cant see it
- i have uninstalled the Samsung health app on my phone and installed the one in the post and the issue still standing
 

Dante63

Senior Member
Nov 1, 2015
1,849
1,605
28
the Clouds
Samsung Galaxy Note 20 Ultra
There is an entire section for downloads, what problems are you facing so I could assist?
Thanks for the reply, but I wrote, that I'm on stock ROM (no root, no custom recovery). So, I can't see any method how it is possible to edit build.prop. Everything what I found on internet about editing build.prop requires root permisions. So, it seems, that it's not solution for me :-( Any other idea? :)
Do a clean Odin flash install of the ROM, what I usually do is through custom recovery I delete and format my phone then I go into download mode and flash the stock ROM, preferably old ROM, after that, I let the phone update to the latest ROM, this process ensures that from a flash to update, your files are back to its original state, you can check build.prop by adb command if I'm not mistaken, pull and read, I believe your build.prop tima is still 1
Hola alguno me ayuda a quitar la cuenta google de un celular que me regalaron? es un s8 plus y su version de es
Samsung Galaxy S8 + (SM-G955F) G955FXXSBDTJ4 esta bloqueada por una cuenta google, no la se y busque hacer downgrade y no pude, no encuentro el firmaware android 7.0 para poder usarlo, alguno de ustedes sea tan amable de pasarme el link porfavor por mensaje privado o alguna manera de ayudarme muchisimas gracias
hola estas en el hilo equivocado
busque XDA para encontrar su problema y, con suerte, una solución
Tienes FRP Google Lock en tu teléfono
El centro de servicio de Samsung puede quitarlo fácilmente pero por una tarifa, pero si lo quita usted mismo, buena suerte, existe un alto riesgo de dañar el teléfono.
any idea how can i install the BP app to my watch
i have ECG running so far so good now and i'm really happy with the outcome
while installing the BP app it gives a success message on the phone but after a while it says failed to install on the watch and i cant see it
- i have uninstalled the Samsung health app on my phone and installed the one in the post and the issue still standing
Samsung health app is only for BP sync and nothing more...
Since you have ECG, that means you have SHM and which means you already have BP on the watch but disabled with high version so you can't install BP to enable it, your option is signing the modified BP and installing it like everyone else...
I followed the instructions exactly as presented and could not get the BP.tpk to install. I think the BP in your Google Drive is bad or bugged. Was able to obtain the BP from the below forum post and that worked for me after signing it.
Because you installed BP.tpk and not modified_BP.tpk, BP.tpk doesn't need to be signed, it has Samsung signature, you install it, if it fails, you check the watch, you see SHM, you realize this means package BP.tpk is already on the watch but disabled, so you go for the alternative method, installing the modified version, boom, installed...
 

thomasleek

New member
Jun 22, 2021
2
0
Hi man, coming from your YT video.
Tried installing it multiple times, had some errors..
ECG install was really easy and i did it in a couple of minutes trough another YT video.
BP has been hours of torture tbh.
Tought in the end everything worked out. Installed the BP. APK on my mobile but it does nothing on my watch.

Can i maybe pay you and we get on a Teamviewer or something?
I really want BP but can't figure it out.
 

Neeschar

Member
Jul 21, 2017
34
20
Hi man, coming from your YT video.
Tried installing it multiple times, had some errors..
ECG install was really easy and i did it in a couple of minutes trough another YT video.
BP has been hours of torture tbh.
Tought in the end everything worked out. Installed the BP. APK on my mobile but it does nothing on my watch.

Can i maybe pay you and we get on a Teamviewer or something?
I really want BP but can't figure it out.
If method 1 doesnt work for you, u need to use method 2 (from dantes video).
But if u used method 2, and (your signed) BP cant be installed on the watch, activate on the
watch: install from other sources. That worked for me.
 

Top Liked Posts

  • 1
    Have re-installed and reset the watch like 3 times now ! The sensors are okay through the diagnostics. I assume there is a defect though.
    Thank you !
    Sorry that I couldn't help much, if the watch is stuck at 0%, take it to Samsung and show it to them, any questions they ask, say you got it with the update 🤷🏻‍♂️, they won't know, after all, there are watches with BP already, they'll assume yours is one of those...
    1
    Sorry that I couldn't help much, if the watch is stuck at 0%, take it to Samsung and show it to them, any questions they ask, say you got it with the update 🤷🏻‍♂️, they won't know, after all, there are watches with BP already, they'll assume yours is one of those...
    You helped too much ! And you helped all those people here, so it is the same for me :) I will. Mine is quite old, but I'll try it ! Thanks again!
  • 4
    As some of you have seen, 193 is out,
    I will keep updating this post about what findings I see:
    1. Phone and watch UDI added, they return empty values when first called but in BP and ECG, they have a value...?
    2. A slight change in the interface, not sure where...
    3. Both BP & ECG are using the UDI function and have some sort of force check version...
    4. is EU Model function is now active, not sure what it does so far...
    5. Funny typos, believe it or not lol...
    That's my analysis, time to mod and see what happens...
    Stay tuned all...
    4
    Having the exact same problem during signing into the Samsung account in the certification manager. Tried lots of different things, even different computers, tried disabling the windows firewall and antivirus but each and every time I have been shown the Server error: 500. View attachment 5350903View attachment 5350905
    I'm facing the same issue than Rhp15577 and rc288. Tried on 2 different PCs, different internet connections, also created a new samsung account and result is always the same . I have disbled both, Windows firewall and Kaspersky.
    Very odd, did you try contacting Samsung?
    Any updates on the 193 mod?
    Hopefully today I release it...
    2
    I rolled back to 6.16 too. After activating Dev and Devmode, i stopped
    the app, cleared cache and now: i needed to go to SHM again and
    click on left top and then "Data" ...then "SH" and needed to enable
    again both settings. Now the sync works.

    ECG just jumps to SHM but im happy that i see the BP-Values now.
    We will stay forever at 6.16 i think ^^

    PS: and no, i got the old version of SHM.
    2
    @Dante63

    Just a quick note to say i just updated to SHM 1.1.0.193 and all is well, BP calibration and sync to SHealth working perfectly. Still on SHealth 6.16 :)
    2
    Since I have the 1.1.0.175 version, is it better to uninstall it, then install the 1.1.0.193 version?
    You can upgrade, as in install 193 over the 175 and clear the data of the app or uninstall 175 and install 193...

    Both are the same
  • 97
    Hello Everyone,
    I hope you all are fine...


    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: 175 (no root detection, No Force update to the latest version, English language Only), 181 & above (Multilanguage, no root detection, no country restriction, no device restriction (works on all devices, however, some Huawei devices are facing issues), age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0043, BP and ECG Standalone English Only...
    • BUGS: Nothing that I know so far...
    • FUTURE WORKS: investigate the possibility of having Standalone BP and ECG Multilangual Support and I am open to suggestions 😊 ...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...

    ~~~ ECG + BP - Easy Way & Alternative Way - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/zAclEJMDrhI

    ~~~ Exception in thread "main" ~~~
    This is a very common error for many members, and I will share what members shared, thanks to them:
    Use JDK 15 to fix this issue. This process doesn't work on JDK 16 for now. It gives you this error.
    If JDK 15 didn't fix it, try other suggestions below:
    Thanks everybody.
    It was indeed a problem with the path on the JDK.
    It must to be added to the windows path.
    Everything works wonderfully.
    Big thanks Dante.


    View attachment 5254249
    Thanks @Dante63 - I followed the alternate (long) path and got BP installed successfully. I did run into a couple of issues that others have also pointed out, which you may want to add to your instructions:

    1) JDK path needs to be added to the Path system environment variables, otherwise fit2installer fails to sign the TPKs. That Path addition looks like C:\Users\myuserID\AppData\Local\.package-manager\jdk\bin
    2) APK Easy Tool installation should be added to Exclusions in Windows Security or any other antivirus. APK compilation was not working for me until this was done,.

    Again thanks for putting this all together and letting us enable functionality that we paid for!
    This is what I used by the way, in case it helps anyone else, for setting the path system.

    PATH Environment can be fixed according to Java website guide like:
    Alternatively, a member managed to make it work by doing the following:
    finally found the solution:

    you have to replace the "sdk.info" and "sdk.version"-files within the "Fit2Installer\tizen\tizen-studio"-folder with copied ones from the tizen-studio-folder under C:\tizen-studio
    then copy all the files from the subfolder tools\ide to the corrospondent folders under C:\Fit2Installer\tizen\tizen-studio

    then run the sign.bat ... there will be some strange lines, but at the end it runs through.

    hope it helps!
    It is not neccesorcly it would work as some tried the method and failed to make it work, so remember, in this case, google is your best friend lol and he will be of a great help if these solutions did not work (hopefully they work though), And more to that, I will share this link which I found interesting for those who want to read more about different the "main" exceptions:

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - Samsung Health Monitor No Root, Country, Device, Update Detection + ECG-BP-installer / BP-installer / ECG-installer

    • MinSDK24-SHM1.1.0.193.root.detection.country.restriction.removed.dante63.apk -> "updated version of 193, Unknown checks & UID for phone and watch added..."
    • Samsung Health 6.16.0.047 (min SDK26).apk ->"Latest Samsung Health that worked for BP sync, if your current Samsung Health doesn't sync BP even after switching to DEV with developer mode on then install this..."
    • Samsung Accessory Service 3.1.94 (min SDK15).apk -> "This app should be installed with galaxy wearables but if you don't have it, then install it, this app transfer files from the phone and push them to the watch..."
    • SHM History:
      • MinSDK24-SHM1.1.0.175.root.detection.removed.dante63.apk -> "installs Samsung Health Monitor @caravana Mod with no root detection, most stable version..."
      • MinSDK24-SHM1.1.0.181.root.detection.country.restriction.removed.dante63.apk -> "installs Official Samsung Health Monitor, Modified by Me, removed device restriction, country restriction and root detection, lowered age restriction from 22 to 16..."
      • MinSDK24-SHM1.1.0.183.root.detection.country.restriction.removed.dante63.apk -> "updated version of 181, improved ECG and wide language support..."
      • MinSDK24-SHM1.1.0.189.root.detection.country.restriction.removed.dante63.apk -> "updated version of 183, optimizations done..."
      • MinSDK24-SHM1.1.0.193.root.detection.country.restriction.removed.dante63.apk -> "updated version of 189, SG Country added only..."
    • Original SMH ("Official from Galaxy Store, unmodified"):
      • ORIGINAL.SHM1.1.0.181
      • ORIGINAL.SHM1.1.0.183
      • ORIGINAL.SHM1.1.0.189
      • ORIGINAL.SHM1.1.0.191
      • ORIGINAL.SHM1.1.0.193
    • Original Installers:
        • Samsung-ECG-BP-Retailmode-installer-SMH-1.1.0023.apk -> "installs on your phone and pushes ECG and BP widgets to your watch after allowing installation from unknown sources for your watch, it might fail to install if you have one of the widgets already installed..."
        • Samsung-ECG-BP-Official-installer-SMH-1.1.0037 -> "installs on your phone and pushes the official SMH app to your watch containing ECG and BP widgets, however, it is controlled by Samsung, BP or ECG might not visible till your country is approved, use alternative way in this case to get the missing widget"
        • Samsung-ECG-BP-Official-installer-SMH-1.1.0039 -> "updated version of 37, enhanced ECG and improved UI"
        [*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*]
      • Samsung-ECG-BP-Official-installer-SMH-1.1.0043 -> "installs on your phone and pushes the official SMH app to your watch containing ECG and BP widgets, more improvements on 1.1.0039, however, it is controlled by Samsung, BP or ECG might not visible till your country is approved, use alternative way in this case to get the missing widget"
      • Samsung.ECG.installer.apk -> "installs on the phone and pushes ECG widget to your watch..."
      • Samsung.BP.installer.apk -> "installs on the phone and pushes BP widget to your watch..."
    • Original & Modified Tpks:
      • Original TPKs - Samsung Originally Signed TPKs
        • BP.tpk -> "Blood pressure watch widget..."
        • ECG.tpk -> "ElectroCardioGram watch widget"
        • shm37_international.tpk -> "Samsung Health Monitor version 1.1.0037, rolled-out as a system app on watches when updated"
        • shm39_international.tpk -> "bugs fixed in version 1.1.0037"
        • shm43_international.wgt -> "bugs fixed in version 1.1.0039"
      • Modified Unsigned TPKs - Modified Samsung TPKs, need to be signed in order to work...
        • Unsigned_SBP.tpk -> "Blood pressure watch widget..."
        • Unsigned_SECG.tpk -> "ElectroCardioGram watch widget"
      • Samsung.TPK.installer.apk -> "installs on the phone and pushes whatever tpk widget to your watch..."
      • READ ME.txt -> "information about how to use the TPK installer"
    • JDK 15 -> "Contains JDK 15 for windows 64, Linux and MacOS, this should fix the Java problem you are having"

    Note: If you install the widgets from the APK and you changed your mind and no longer wish to use them, uninstall the apk and the widgets will be uninstalled as well, in other words, the widgets are affected by the apk on your phone...

    ~~~ What You Need For Alternative Way To Sign TPKs~~~
    Java RE: https://www.java.com/en/download/
    Java JDK 15 (recommended), you can get it from either:
    Tizen Studio: https://developer.tizen.org/development/tizen-studio/download
    Fit2Installer: https://forum.xda-developers.com/attachments/fit2installer-zip.4218341/
    APK Easy Tool: XDA - Apk Easy Tool

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    SHM has security checks related to signature which breaks the BP sync between SHM and SH and I struggled to disable that check... Thanks to xda member @juljoe2021, he suggested and advised the use of developer mode in Samsung Health makes it work, I have tested and seen in the logs no security checks were called and the BP syncs between SHM and SH with no issues... The steps are easy to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_232542732.jpgInShot_20210411_232636295.jpgInShot_20210411_201440606.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    I have also uploaded the latest Samsung Health that worked for me but it should work with previous Samsung Health (latest version on the galaxy store is different in every country)...

    Important Note: you need to switch to DEV and turn On the Developer Mode whenever you update Samsung Health, the update in rare cases may reset those settings back to default...

    Currently Set Features are available on what I put on my Google drive, if you update and can't find the set features, rollback...

    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SMH 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SMH 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install... The picture below shows SMH installed on the watch:
    20210110_012035.png

    ~~~ ABOUT THE ORIGINAL SMH ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and Android version 7.0 and above...

    From Version 181 and onwards, Samsung device detection added, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SMH should Work, otherwise, it wouldn't, SMH checks your GeoLocation, Sim Card, and Device CSC (why so complex, it's just BP & ECG):
    • EU_CSC: <-- FULL SUPPORT
      1. AT
      2. BE
      3. BG
      4. CZ
      5. DE
      6. DK
      7. EE
      8. ES
      9. FI
      10. FR
      11. GR
      12. HR
      13. HU
      14. IE
      15. IT
      16. LT
      17. LV
      18. NL
      19. PL
      20. PT
      21. RO
      22. SE
      23. SI
      24. SK
      25. CY
      26. LU
      27. MT
      28. GB
      29. CH
      30. IS
      31. NO
      32. LI
      33. TR
      34. RS
    • EU_MNC: <-- PARTIAL SUPPORT?
      1. AT
      2. BE
      3. BG
      4. CH
      5. CZ
      6. DE
      7. DK
      8. EE
      9. ES
      10. FI
      11. FR
      12. GB
      13. GR
      14. HR
      15. HU
      16. IE
      17. IS
      18. IT
      19. LT
      20. LV
      21. NL
      22. NO
      23. PL
      24. PT
      25. RO
      26. SE
      27. SI
      28. SK
    • Ungrouped:
      1. KR <-- NO ACTION
      2. US <-- BP DISABLED
      3. BR <-- NO ACTION
      4. CL <-- NO ACTION
      5. AE <-- NO ACTION
      6. ID <-- NO ACTION
      7. SG <-- NO ACTION
    SMH 189 listed 3 more countries CY, RU and HK which add restrictions to them aside of the language support...
    SMH 191 listed 1 country which is SG which may add restrictions aside of the language support...

    The original app will work only if you are not rooted, have no busybox and have none of the following apps installed,
    in addition to living in the countries above:
    • com.noshufou.android.su
    • com.noshufou.android.su.elite
    • eu.chainfire.supersu
    • com.koushikdutta.superuser
    • com.thirdparty.superuser
    • com.yellowes.su
    • com.devadvance.rootcloak
    • com.devadvance.rootcloakplus
    • de.robv.android.xposed.installer
    • com.saurik.substrate
    • com.zachspong.temprootremovejb
    • com.amphoras.hidemyroot
    • com.amphoras.hidemyrootadfree
    • com.formyhm.hiderootPremium
    • com.formyhm.hideroot
    • com.koushikdutta.rommanager
    • com.koushikdutta.rommanager.license
    • com.dimonvideo.luckypatcher
    • com.chelpus.lackypatch
    • com.ramdroid.appquarantine
    • com.ramdroid.appquarantinepro
    How do I know all that you ask?
    Well, I have decompiled the apk and removed the detection method, and recompiled it...
    So if you want to keep using the original mod apk or perhaps the original Samsung Health Monitor when it's released, make sure you have none of what I stated and you should be fine...

    ~~~ Don't forget to ~~~
    Bump into the thread when a newer version is released and I will update it...
    or Bump into the thread if you need an older version, share it and I will remove the root detection...
    BUT KEEP IN MIND, I WILL NOT MODIFY ANY OTHER APKS, SO PLEASE DO NOT BUMP FOR THAT...

    Now, it doesn't make sense 🤦‍♂️ why Samsung considers the blood pressure and ecg very critical that it needs lockscreen to be medium and no root :rolleyes: but oh well...

    I am using my Samsung Galaxy Note 20 Ultra Rooted with my Galaxy Watch 3...
    Also, I have tested these apps on BlueStacks, rooted, different types of devices to ensure device and update detection is removed and that the application is running, but please, if you encounter any issues, @ me for a faster response and I will do my best...


    ~~~ Finally ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through recurring donations❤️ or a cup of coffee will do great😊

    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    15
    Changelog,
    Latest Changes:

    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...

    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    6
    You should know by now that youre special :)
    Wish I could share my specialness lol, everyone deserves to get this feature to perform the BP sync...

    Honestly, I checked both 6.16 & 6.17 and both have the exact identical match in the lines for enabling set features, the only guess is that it gets enabled remotely..? It's hard to reverse it because SH has so many folders & files, feels like a maze lol...

    I will do one thing, since Samsung Health isn't a system app, I will keep make a MOD and have set features enabled always...

    Tomorrow, I will prepare and release a MOD for SH latest version, anyone who wants to have latest version with sync can use the MOD or stay with original SH 6.16 for sync till either 6.17 gets set features or a later version does...
    More details please,
    I don't even know what you are installing to guide through it...
    5
    Notice:
    When updating SMH from 175, it's recommended to uninstall instead of upgrading...

    Random Uploads:
    Installing Watch App gives you ECG and BP widgets...
    20201220_154350.jpg20201220_154358.jpg
    Installing the Samsung Health Monitor will sync the watch widgets with it...
    20201220_154704.jpg
    Here are a list of versions of the watch and apps:
    Screenshot_20201225-033223_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-033708_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-034125_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-034142_Galaxy Watch3 PlugIn.jpg
    New update remarks on ECG and BP:
    Screenshot_20210205-064937_Galaxy Watch3 PlugIn.jpg
    5
    Hello Dante, today too I received an update OTA for the Samsung Health app on the GW3 and installed it. Since I last charged the SW3 battery, about 22 hours ago, I now have left an 27% and the Samsung Health app has consumed 25% of the total battery.
    I don't think it is related to my previous installation of SHM 183 and to discard it and continue with my troubleshooting, I ask you if you have any suggestions in this regard? Should I reset the SW3?
    Thanks!
    Yeah, Samsung Health does consume a lot on the watch, SHM has nothing to do with it, it can be seen in galaxy wearables, about watch then battery, Samsung Health ha many running services, such as Heart Beat, Steps, Auto-workout detect, stress, sleeping time, stairs and so on...
    I managed to install the modified Health Monitor app 1.1.0.183 and it works.
    I tried to install both the ECG as well as the BP installers but only the ECG managed to install.
    I don't have the Health Monitor app on my watch, according to your video tutorial.
    did you try the alternative way?
    Thanks for your help!
    I have not either SHM installed on watch.
    I will try...
    Let me know if you need help...
    Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
    Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...
    I have a watch with a pre-installed SHM like yours. On a nearby branch, a respected I0nax has developed an alternative solution. To be installed as a separate application on the watch without affecting the installed one. Works normally. Yesterday he rebuilt the latest 0.39 version.
    p.s Installation via signature
    First, Credit him by adding @ and typing his name like @l0nax ...
    Second, mention the thread link...
    He modified the SHM for the phone which is brilliant how he caught the device restriction that I missed
    but patched SHM for watch...?
    It's only renaming package name just like I did with the BP and ECG, nothing is patched...
    When a tpk is modified, they will need to sign it because Samsung Signature is broken...
    Now on the watch, they'll see 2 SHMs and multiple widgets...
    Having 2 SHM services, luckily they don't run in the background, would drain the battery...
    Kindly asking you from now and onwards, you can suggest, you can assist
    BUT I do not wish to see you posting anything on your own to:
    Claim it as your own or list it to others randomly or whatever that is you are doing...
    I have worked hard to create this simple guide, I dedicated my time,
    I have listed Thanks to members for their work and effort and listed their guides as well...
    I do not wish to see you posting files from other threads and outside XDA community...
    Read the 📚 XDA Developers Forum Rules 📚 since you are a new member...
    Show some respect when you are on other threads and credit others properly...