• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RESTRICTIONS-REMOVED] Samsung Health Monitor - TIZEN - 1.1.1.157 - Root, Age, Country & Device Restriction Removed - 15th September 2021

Was this useful and you were satisfied with the outcome...?


  • Total voters
    314
Search This thread
Installed last "MinSDK24-SHM1.1.0.193.root.detection.country.restriction.removed.dante63.apk" version.

I open it, grant access to the sensors and when name screen and all that stuff appears, the app will close and give an error.

Any clue ?


Many thanks in advance
I have the same symptoms on Huawei Mate 20, I get past accepting the terms, and SHM detects my Watch but when I click continue it just bombs out. I tried installing all versions as far back as 175 and all do the same thing. Any help appreciated!
Do you have Samsung Health installed? If yes, can you uninstall it, finish the SHM setup without the Samsung Health data and see if it actually works...?

I was never been able to understand why some Huawei phones have issues and sadly i don't have a Huawei phone to investigate...
I followed your directions and created both APK files but I searched and did not find how to push APK to my GW3 using the TIZEN studio. Is there a site that provides instruction how to send file to watch?
You can't push apk to the watch, you install the apk on the phone and it pushes it to your watch... through tizen studio you can install tpk only, google search it to see how it is done...
 

sronline78

New member
Aug 14, 2011
2
0
Thank you for that, 1 step closer! I removed Samsung Health, re-installed SMH and now ECG works. Unfortunately still no BP, tried reinstalling the APK but no luck, weirdly the BP app no longer shows up on my watch which it was doing previously (although it wouldn't work before as it needed to calibrate with the phone). I've now reinstalled Samsung Health and ECG still works :)
 

enebro77

Senior Member
Aug 19, 2008
387
53
Do you have Samsung Health installed? If yes, can you uninstall it, finish the SHM setup without the Samsung Health data and see if it actually works...?

I was never been able to understand why some Huawei phones have issues and sadly i don't have a Huawei phone to investigate...

You can't push apk to the watch, you install the apk on the phone and it pushes it to your watch... through tizen studio you can install tpk only, google search it to see how it is done...

Finally I reinstalled everything from scratch and worked.
Honestly, dont know what happened, bro ...
 
Thank you for that, 1 step closer! I removed Samsung Health, re-installed SMH and now ECG works. Unfortunately still no BP, tried reinstalling the APK but no luck, weirdly the BP app no longer shows up on my watch which it was doing previously (although it wouldn't work before as it needed to calibrate with the phone). I've now reinstalled Samsung Health and ECG still works :)
Which apk? The easy way BP? I'm having a new theory that if I'm not wrong, the watch is getting its instructions from the phone SHM, I'm still investigating that, you can go for the BP alternative, it will work 100%, long but guaranteed...
Finally I reinstalled everything from scratch and worked.
Honestly, dont know what happened, bro ...
Well, I'm having doubts that I may have removed device restrictions from SHM but upon connecting SHM with SH, I think SH starts checking restrictions maybe, just a theory...

So if you finish setting up SHM, then install SH, everything should be fine and if you want to enable the data sync between them, you just go to SHM in menu go to data and you'll see Samsung Health as data permissions...
 
Logic for setFeatures is found inside smali file inside the path:
"\smali_classes3\com\samsung\android\app\shealth\home\settings\about\HomeSettingsAboutActivity.smali"
Inside method intiView you will see:
"sget v0, Lcom/samsung/android/app/shealth/home/R$id;->features_btn:I"
and you will find bindings and listeners on the currentversion which allows to show and hide the dev and setFeatures,
I will need to decompile the APK to convert things to Java classes as it's hard to read this as a smali file due the complexity of how it's written...
If any of you wish to read and find the logic, feel free to do so...

the path to the layout:
"\res\layout\home_settings_about.xml"
which has "android:id="@iD/features_btn"" and inside what we want "android:id="@iD/set_features""
if only it was possible to change
Code:
            <LinearLayout android:gravity="center" android:layout_gravity="center_horizontal" android:orientation="horizontal" android:id="@id/features_btn" android:focusable="true" android:visibility="gone" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginStart="48.0dip" android:layout_marginEnd="48.0dip">
                        <androidx.appcompat.widget.AppCompatButton android:textSize="16.0sp" android:id="@id/set_features" android:visibility="visible" android:text="Set features" android:textAllCaps="false" style="@style/home_settings_about_bottom_btn" />
            </LinearLayout>
into
Code:
            <LinearLayout android:gravity="center" android:layout_gravity="center_horizontal" android:orientation="horizontal" android:id="@id/features_btn" android:focusable="true" android:visibility="gone" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginStart="48.0dip" android:layout_marginEnd="48.0dip">
            </LinearLayout>
                        <androidx.appcompat.widget.AppCompatButton android:textSize="16.0sp" android:id="@id/set_features" android:visibility="visible" android:text="Set features" android:textAllCaps="false" style="@style/home_settings_about_bottom_btn" />
this will ensure that setFeatures will always be visible whether you tap the version many times or not...
But this fails on Samsung Devices and is not stable on other devices, what I mean is, it is not possible to modify the Samsung Health app, the only way is to understand the logic and figure out how setFeatures is visible and invisible...

I sent Samsung another Email through the contact us on Samsung Health to see whether they will be kind to share how it's done or they will maneuver and give me a different answer just like the last time...
 
Last edited:
  • Like
Reactions: 73sydney

Jurassick

New member
Apr 9, 2011
1
0
hi everyone. i have Galaxy Note 10+ (SM-N975U1) and galaxy watch 3.
when launching SHM 1.1.0.193 Mod by dante63 it requests the accesses, i grant and the app closes automatically on the profile creation stage. all the next laucnhes it closes automatically after pushing Accept button on the welcome page
 

ruszok

Senior Member
Jan 5, 2010
50
5
Hi,
Same here (FC in SHM). But...

This works for me:
1. Samsung Health 6.16.0.047 (min SDK26).apk from dante63 Google Drive,
2. SHM 1.1.0.193 Mod by dante63,
3. Configure set features,
4. Configure SHM,
5. Update SH by Google Play.
 
hi everyone. i have Galaxy Note 10+ (SM-N975U1) and galaxy watch 3.
when launching SHM 1.1.0.193 Mod by dante63 it requests the accesses, i grant and the app closes automatically on the profile creation stage. all the next laucnhes it closes automatically after pushing Accept button on the welcome page
Don't grant it connection, finish SHM first then use SH... if you're having issues, uninstall SH, finish SHM then install SH and use it again
 
Last edited:
Screenshot_20210802-220357_Gmail.jpg

Well, I guess the "set features" was enabled by accident, so I gotta solve it from SHM perhaps in order for it to work maybe without the need of "set features"...
 

73sydney

Senior Member
Jul 21, 2018
1,834
1,587
Sydney
Google Pixel 2 XL
View attachment 5376481
Well, I guess the "set features" was enabled by accident, so I gotta solve it from SHM perhaps in order for it to work maybe without the need of "set features"...

Well at least thats a definitive answer, and none of us need to go slightly bonkers when we upgrade wondering if "maybe we just wait a few days, it will appear". Cheers @Dante63
 
  • Like
Reactions: Dante63
Well at least thats a definitive answer, and none of us need to go slightly bonkers when we upgrade wondering if "maybe we just wait a few days, it will appear". Cheers @Dante63
Yeah at least that, but I will do few experiments whenever I have a free time and hopefully I can get somewhere in this...
 
Hello dear Dante!
Is there a way to activate the Samsung Watch 3 oxygen sensor?
With respect
SpO2 is part of the watch Samsung Health, according to @adfree it can be activated by changing Watch CSC, keep in mind you might lose features like S-pay or Spotify aside bricking the watch if you do a step wrong...
 
  • Like
Reactions: Fattahi55

adr8500

New member
Aug 4, 2021
1
0
Hi, thanks for your hard work!

I've a problem with the BP. I've installed your Drive versions for SHM and SH and updated SH. Also have installed BP and ECG, but BP isnt working. My SGW 3 isnt found....

What I can do? Any advice before try the second alternative? My phone is a Xiaomi Mi 10T Lite... Thank you
 
Hi, thanks for your hard work!

I've a problem with the BP. I've installed your Drive versions for SHM and SH and updated SH. Also have installed BP and ECG, but BP isnt working. My SGW 3 isnt found....

What I can do? Any advice before try the second alternative? My phone is a Xiaomi Mi 10T Lite... Thank you
If BP doesn't get installed, your only solution is the alternative...
 

KAngelo

Member
Dec 20, 2016
17
1
Hello Dante63, first of all big thanks for your hard work.

I got a problem that whenever i try creating profile in SMH and click accept it force closes. I have tried installing both SMH and SH in different orders and clearing data but it always force closes. Can you help me? My mobile is a Huawei p20 lite running android 8.1

I have found out that when i try clicking "Terms of Use" in the creating profile page it force closes so maybe thats the problem?
 

Attachments

  • Screenshot_Samsung_Health_Monitor_20210806-055937.jpg
    Screenshot_Samsung_Health_Monitor_20210806-055937.jpg
    209.9 KB · Views: 20

Top Liked Posts

  • 1
    For a moment, I thought I was having a deja vu, but you asked that question on Telegram, didn't you?
    Yes, thanks 😊 this was before sending it on telegram
    1
    Dante,
    I used your alternative method to install your modded SHM and bp tpk on my Samsung fold 3 and it worked like a charm. I had compiled both tpk files but only installed the bp since the ECG tab was already in the app. I'm in the U.S. so bp is not available yet. Just wanted to try it since I had installed them on my OnePlus phone.
    Thank you so much for the tutorial.
  • 13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    7
    I am going to start organizing the Thread for Watch4 *Excitement* lol
    6
    Ok, It's A lot to change, and things may interfere because the guide of Tizen doesn't work with WearOS, so I will create a new thread in the Watch4. That way I wouldn't mess things here for watch3 & active 2 users, the guide is completely different...
    6
    Watch4 SHM MOD thread is live...
    5
    Where can I download It? Is there a procedure ti install It? I would buy the Galaxy Watch 4
    I'm writing the guide and preparing the files, patiently wait, Watch4 is easier than Tizen watches (active2 & watch3), the tutorial will be different and simple, I don't have the watch to make a video tutorial, so it will be text instructions...
    Thank you! It worked like a charm. BP was synced, then I have the new SHM version. I disabled auto-update in Google Play Store to avoid get my Samsung Health replaced.
    You can always use the latest version and when you want to backup BP, roll-back to SH 6.16, some users reported updating from 6.16 to 6.18, doesn't break the sync...

    In the end, it's your choice...
  • 123
    Hello Everyone,
    I hope you all are fine...


    Tizen-Lockup-On-Light-RGB.png


    ~~~ TIZEN WATCHES ONLY ~~~
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0049, BP and ECG Standalone English Only...
    • BUGS: none that I know of...
    • FUTURE WORKS: investigate the possibility of enabling ECG and BP on the watch SHM through the phone SHM... (Need Volunteers with SHM on the watch with either ECG or BP)
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'lltry to help...
    • IMPORTANT NOTE ABOUT POSTING: DO NOT POST BP INSTALLER FAILED, DO NOT POST ECG INSTALLER FAILED, IF IT FAILED, GO FOR ALTERNATIVE SOLUTION, THE THREAD HAS SO MANY POSTS ABOUT THIS AND THE ANSWER IS ALWAYS THE SAME, GO FOR ALTERNATIVE METHOD, ORIGINAL INSTALLERS AREN'T ALWAYS GOING TO WORK...

    ~~~ FOR WearOS (Watch4 And Above), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/6JPQ04EW774

    ~~~ HOW SHM MOD BEHAVE WHEN RUNNING FOR THE FIRST TIME ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/8QLH04Cu5gA

    ...This is not the latest version, this is just to show you how the app is supposed to work regardless of the version...

    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...
    ~~~ Tizen - ECG + BP - Easy Way & Alternative Way - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/zAclEJMDrhI

    ~~~ Exception in thread "main" ~~~
    This is a very common error for many members, and I will share what members shared, thanks to them:
    Use JDK 15 to fix this issue. This process doesn't work on JDK 16 for now. It gives you this error.
    It has been confirmed that JDK 15 is the solution for this error... do not change files or set any PATHS...

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - TIZEN - SHM No Root, Country, Device, Update, Age Detection + ECG-BP-installer / BP-installer / ECG-installer


    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ What You Need For Alternative Way To Sign TPKs~~~
    Java RE: https://www.java.com/en/download/
    Java JDK 15 (recommended), you can get it from either:
    Tizen Studio: https://developer.tizen.org/development/tizen-studio/download
    Fit2Installer: https://forum.xda-developers.com/attachments/fit2installer-zip.4218341/
    APK Easy Tool: XDA - Apk Easy Tool

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    SHM has security checks related to signature which breaks the BP sync between SHM and SH and I struggled to disable that check... Thanks to xda member @juljoe2021, he suggested and advised the use of developer mode in Samsung Health makes it work, I have tested and seen in the logs no security checks were called and the BP syncs between SHM and SH with no issues... The steps are easy to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_232542732.jpgInShot_20210411_232636295.jpgInShot_20210411_201440606.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    I have also uploaded the latest Samsung Health that worked for me but it should work with previous Samsung Health (latest version on the galaxy store is different in every country)...

    Important Note: you need to switch to DEV and turn On the Developer Mode whenever you update Samsung Health, the update in rare cases may reset those settings back to default...

    Currently Set Features are available on what I put on my Google drive, if you update and can't find the set features, rollback...

    IMPORTANT UPDATE: set features was enabled accidentally according to Samsung support as they claimed, it is used internally and not for the public, version 6.16 is the latest with set features...


    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SHM 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SHM 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install...
    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and Android version 7.0 and above...

    From Version 181 and onwards, Samsung device detection added, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC (why so complex, it's just BP & ECG):
    • EU_CSC: <-- FULL SUPPORT
      1. AT
      2. BE
      3. BG
      4. CZ
      5. DE
      6. DK
      7. EE
      8. ES
      9. FI
      10. FR
      11. GR
      12. HR
      13. HU
      14. IE
      15. IT
      16. LT
      17. LV
      18. NL
      19. PL
      20. PT
      21. RO
      22. SE
      23. SI
      24. SK
      25. CY
      26. LU
      27. MT
      28. GB
      29. CH
      30. IS
      31. NO
      32. LI
      33. TR
      34. RS
    • EU_MNC: <-- PARTIAL SUPPORT?
      1. AT
      2. BE
      3. BG
      4. CH
      5. CZ
      6. DE
      7. DK
      8. EE
      9. ES
      10. FI
      11. FR
      12. GB
      13. GR
      14. HR
      15. HU
      16. IE
      17. IS
      18. IT
      19. LT
      20. LV
      21. NL
      22. NO
      23. PL
      24. PT
      25. RO
      26. SE
      27. SI
      28. SK
    • Ungrouped:
      1. KR <-- NO ACTION
      2. US <-- BP DISABLED
      3. BR <-- NO ACTION
      4. CL <-- NO ACTION
      5. AE <-- NO ACTION
      6. ID <-- NO ACTION
      7. SG <-- NO ACTION
    SHM 189 listed 3 more countries CY, RU and HK which add restrictions to them aside of the language support...
    SHM 191 listed 1 country which is SG which may add restrictions aside of the language support...
    Check Changelogs to see countries...

    The original app will work only if you are not rooted, have no busybox and have none of the following apps installed,
    in addition to living in the countries above:
    • com.noshufou.android.su
    • com.noshufou.android.su.elite
    • eu.chainfire.supersu
    • com.koushikdutta.superuser
    • com.thirdparty.superuser
    • com.yellowes.su
    • com.devadvance.rootcloak
    • com.devadvance.rootcloakplus
    • de.robv.android.xposed.installer
    • com.saurik.substrate
    • com.zachspong.temprootremovejb
    • com.amphoras.hidemyroot
    • com.amphoras.hidemyrootadfree
    • com.formyhm.hiderootPremium
    • com.formyhm.hideroot
    • com.koushikdutta.rommanager
    • com.koushikdutta.rommanager.license
    • com.dimonvideo.luckypatcher
    • com.chelpus.lackypatch
    • com.ramdroid.appquarantine
    • com.ramdroid.appquarantinepro
    How do I know all that you ask?
    Well, I have decompiled the apk and removed the detection method, and recompiled it...
    So if you want to keep using the original mod apk or perhaps the original Samsung Health Monitor when it's released, make sure you have none of what I stated and you should be fine...

    ~~~ Don't forget to ~~~
    Bump into the thread when a newer version is released and I will update it...
    or Bump into the thread if you need an older version, share it and I will remove the root detection...
    BUT KEEP IN MIND, I WILL NOT MODIFY ANY OTHER APKS, SO PLEASE DO NOT BUMP FOR THAT...

    Now, it doesn't make sense 🤦‍♂️ why Samsung considers the blood pressure and ecg very critical that it needs lockscreen to be medium and no root :rolleyes: but oh well...

    I am using my Samsung Galaxy Note 20 Ultra Rooted with my Galaxy Watch 3...
    Also, I have tested these apps on BlueStacks, rooted, different types of devices to ensure device and update detection is removed and that the application is running, but please, if you encounter any issues, @ me for a faster response and I will do my best...


    ~~~ Finally ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊

    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    26
    Changelog,
    Latest Changes:

    --- 15th September 2021 - Uploaded installer for Watch SHM 1.1.0049 wgt...

    --- 9th September 2021 - Patched and released Tizen SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 23rd Aug 2021 - added a Tizen logo into version 153 and changed app version label included tizen, this is just to ensure that you don't use Tizen SHM with Watch4 because it's not compatible, changed the message when no watch is connected to "To use this feature, you need Galaxy Watch Active 2 or Galaxy Watch 3 that was released in a country where this feature has been approved." and finally, on my google drive, I renamed all phone apk files to include "Phone.Tizen." at the beginning of the name, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    --- 22nd Aug 2021 - created a thread for watch4, this thread will be only for Tizen devices...
    --- 21st Aug 2021 - Watch4 mystery is revealed after long hours of dedication and with the help of different amazing members on Telegram (specifically Italy, love you all and never forget 🤌🏻 lol) and on reddit, the shm mod and watch4 is working but the process is different than the tizen watches, the mod is still being tested and still looking to improve it a bit, it works only on watch4, I will release it when I think it's perfect and has no flaws, I say in a day or two...
    --- 17th Aug 2021 - More patches applied to SHM 1.1.1.153 and 1.1.1.151... I also made an installer that would push SHM 47 to the watch... I'm still investigating the matter in regards to the watch 4 detection issues through logcat of users, if I can't fix it, I will probably be able to do more when I get the watch on 10th of September...
    --- 13th Aug 2021 - Released SHM 1.1.1.153 and patched 1.1.1.151, when no watch is connected, it will show a message instead of a black screen...
    --- 12th Aug 2021 - Fixed SHM 1.1.1.151 issue when trying to accept, you should not face any issues...
    --- 11th Aug 2021 - Released SHM 1.1.1.151, it has a bug where if running for the first time, you cannot proceed after hitting accept, so install the previous version of SHM 1.1.0.193, hit accept and finish the profile then update till I release a fix. I also removed from my Drive SHM 175 as it is deprecated, there is no use in having it anymore since you can't update from 175 to anything newer...
    --- 8th Aug 2021 - Fixed Samsung Health interference with Samsung Health Monitor, it shouldn't crash anymore and all SHM MODs have been signed with release-keys of my own, this will ensure that my work wouldn't be tampered with or Modified for whatever purposes, if you install an update of SHM MOD from other sources and it fails, that means it has been tampered with, not released by me...
    --- 7th Aug 2021 - Found out latest Samsung Health breaks SHM sometimes, workaround is uninstalling both, install SHM first, finish the profile then install Samsung Health again, DO NOT ENABLE THE SYNC INSIDE SHM DATA WITH SAMSUNG HEALTH... I will try my best to find time to investigate this and fix it... I also would like to add that "set features" was accidentally released to the public according to Samsung support, version 6.16 is the latest, I will investigate this as well to see if there is a solution, as a workaround, you can always downgrade Samsung Health, sync the BP and upgrade Samsung Health again... and finally, I did make a patreon page and I'd appreciate your support if you can, I believe that is everything in August for now...
    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...
    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    13
    Notice:
    When updating SMH from 175, it's recommended to uninstall instead of upgrading...

    Random Uploads:
    Installing Watch App gives you ECG and BP widgets...
    20201220_154350.jpg20201220_154358.jpg
    Installing the Samsung Health Monitor will sync the watch widgets with it...
    20201220_154704.jpg
    Here are a list of versions of the watch and apps:
    Screenshot_20201225-033223_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-033708_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-034125_Galaxy Watch3 PlugIn.jpgScreenshot_20201225-034142_Galaxy Watch3 PlugIn.jpg
    New update remarks on ECG and BP:
    Screenshot_20210205-064937_Galaxy Watch3 PlugIn.jpg
    13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    7
    I am going to start organizing the Thread for Watch4 *Excitement* lol