• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Was this useful and you were satisfied with the outcome...?


  • Total voters
    343
Search This thread
@Dante63

Sad news:

I have tried again, failed miserably

APK method:

1) Removed both TPK installers from phone (which removes the BP and ECG tpks from watch)
-confirmed removed on watch
2) Rebooted
3) Redid the same thing i did the other night, using even your prepackaged apktool
4) Installed and pushed apk from watch..
5) Failed to install <- same as the other night

Fit2Installer method:

1) Connect via sdb (which as i may have mentioned ive never gotten to work)
- slightly different in that tonight its prompting me to authorise the connection on the watch
- watch immediately vibrates and reboots

Tried a dozen times, same result...

Nothing it seems will get that SHM wgt installed on my Active 2....

Think i can reinstate the separate ECG and BP tpks easier tonight however....

Wish i had better news for you mate :)
So what do you see when you enter the watch ip?
 

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
So what do you see when you enter the watch ip?
a prompt to authorise the connection on the watch

Clipboard03.jpg


which i attempt to do...the moment i hit the tick, she reboots
 
a prompt to authorise the connection on the watch

View attachment 5415513

which i attempt to do...the moment i hit the tick, she reboots
Very odd behavior, it shouldn't reboot at all, your debugging and developer mode are both on?

And I confirm to you that this is a successful connection, so all what is left is install
 

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
Very odd behavior, it shouldn't reboot at all, your debugging and developer mode are both on?

And I confirm to you that this is a successful connection, so all what is left is install

I hate to tell you it reboots (ive never seen it do it at any other time in history in the year ive owned it)

Theres no way it can be connected as it reboots...

Both debugging and developer are on

Im as puzzled as you. Works fine with the ECG and BP tpk's...its never not worked

p.s. The new video is good, it just confirms im not going mental as i did the same steps the other night, but should help plenty of other folks :)
 
Last edited:
I hate to tell you it reboots (ive never seen it do it at any other time in history in the year ive owned it)

Theres no way it came be connected as it reboots...

Both debugging and developer are on

Im as puzzled as you. Works fine with the ECG and BP tpk's...its never not worked

p.s. The new video is good, it just confirms im not going mental as i did the same steps the other night, but should help plenty of other folks :)
It's worth trying Tizen studio install method
 

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
It's worth trying Tizen studio install method

Ill let you have the good news in the form of a picture

success.jpg


what you didnt think i was going to let this end on a bad note, did you?

Want to know how i fixed it?

1) I was so frustrated i decided to do (for whatever reason, form the back of my mushy brain at 6am - after being up 16 hours):

sdb devices

in the response was a device i couldnt identify

i turned off the wifi on my phone...

i checked i still had USB debugging turned off (because i have the phone plugged into the PC to charge)

sdb devices...nope still there

what the heck

physically unplug the phone

sdb devices...nope still there

a few moments later i try again...gone!

all i can think is theres at least a moment where USB debugging is enabled before being toggled off, during boot? because i rebooted the phone after my last try pushing the apk from there.... who knows

try and connect to watch...nope...unauthorised

another out of the dark recesses of my mind thought

hang on....

headed over to my user profile D:\users\Me\.tizen (i have my user profile on a secondary spinning disk)

deleted the .tizen folder

$ sdb connect 192.168.1.137:26101
connecting to 192.168.1.137:26101 ...
device unauthorized. Please approve on your device.

authorised it...connected!

sdb had obviously tried authorising the phone, not the watch...hence the no connection

sdb devices...just the watch!

$ sdb install shm49_international_mod.wgt
WARNING: Your data is to be sent over an unencrypted connection and could be read by others.
pushed shm49_international_mod.wgt 100% 4188KB 0KB/s
1 file(s) pushed. 0 file(s) skipped.
shm49_international_mod.wgt 1751KB/s (4288742 bytes in 2.390s)
path is /home/owner/share/tmp/sdk_tools/shm49_international_mod.wgt
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.sams.bp] key[start] val[install]
<snipped>
[ok]
spend time for pkgcmd is [8664]ms

Happy days :)

Thanks for putting up with this rather weird one

Lesson: Make sure you do not have any other devices sdb might pick up, not even turning off USB Debugging and wifi on my phone was enough. Dont ask me why that interaction with the phone during this was rebooting my watch....that will remain a mystery i feel

So, yeah, that wasnt painful... :)

I shall sleep the sleep of the victorious/righteous shortly...

p.s. Actually a little tricky to get a good shot through the full face protector
 
Last edited:
  • Like
Reactions: Dante63
Ill let you have the good news in the form of a picture

View attachment 5415605

what you didnt think i was going to let this end on a bad note, did you?

Want to know how i fixed it?

1) I was so frustrated i decided to do (for whatever reason, form the back of my mushy brain at 6am - after being up 16 hours):

sdb devices

in the response was a device i couldnt identify

i turned off the wifi on my phone...

i checked i still had USB debugging turned off (because i have the phone plugged into the PC to charge)

sdb devices...nope still there

what the heck

physically unplug the phone

sdb devices...nope still there

all i can think is theres at least a moment where USB debugging is enabled before being toggled off, during boot? because i rebooted the phone after my last try pushing the apk from there.... who knows

try and connect to watch...nope...unauthorised

another out of the dark recesses of my mind thought

hang on....

headed over to my user profile D:\users\Me\.tizen (i have my user profile on a secondary spinning disk)

deleted the .tizen folder

$ sdb connect 192.168.1.137:26101
connecting to 192.168.1.137:26101 ...
device unauthorized. Please approve on your device.

authorised it...connected!

adb devices...just the watch!

$ sdb install shm49_international_mod.wgt
WARNING: Your data is to be sent over an unencrypted connection and could be read by others.
pushed shm49_international_mod.wgt 100% 4188KB 0KB/s
1 file(s) pushed. 0 file(s) skipped.
shm49_international_mod.wgt 1751KB/s (4288742 bytes in 2.390s)
path is /home/owner/share/tmp/sdk_tools/shm49_international_mod.wgt
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.sams.bp] key[start] val[install]
<snipped>
[ok]
spend time for pkgcmd is [8664]ms

Happy days :)

Thanks for putting up with this rather weird one

Lesson: Make sure you do not have any other devices sdb might pick up, not even turning off USB Debugging and wifi on my phone was enough. Dont ask me why that interaction with the phone during this was rebooting my watch....that will remain a mystery i feel

So, yeah, that wasnt painful... :)

I shall sleep the sleep of the righteous shortly...

p.s. Actually a little tricky to get a good shot through the full face protector
Ayyeeee, congratulations lol...
I hope it was worth it, better than having outdated BP and ECG...
 
  • Like
Reactions: 73sydney

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
@Dante63

Now thats done, i noticed you put a new file up on storage to enable features in post 6.16 Samsung Health, so hopefully i wont have to install 6.16, then set features, then upgrade to 6.18 anymore :) It that works i will love you a bit more

that will be my next test...im sure that will go more smoothly :)

but thats a later today job, after some day sleeping
 
@Dante63

Now thats done, i noticed you put a new file up on storage to enable features in post 6.16 Samsung Health, so hopefully i wont have to install 6.16, then set features, then upgrade to 6.18 anymore :) It that works i will love you a bit more

that will be my next test...im sure that will go more smoothly :)

but thats a later today job, after some day sleeping
it will work 100%, 4 minutes video tutorial, you will always use the latest version of Samsung Health, and BP will always be syncing...
But I think I need more love than a bit lol
 
  • Love
Reactions: 73sydney

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
it will work 100%, 4 minutes video tutorial, you will always use the latest version of Samsung Health, and BP will always be syncing...
But I think I need more love than a bit lol

Couldnt help myself, tested it before i turned in

1) Removed Samsung Health 6.16 (i hadnt got round to calibrating and then updating to 6.18 since clean ROM flash, so this install has never had set features enabled)
2) Placed SamsungHealth folder in internal /Downloads
3) Installed latest Samsung Health
4) Enabled Set Features and set dev flags
5) Stopped SH and cleared cache
6) Calibrated BP with cuff
7) Sync'd without issue

All is well

You are doing the lords work Dante :)

p.s. sorry to any new users who might feel "uncomfortable" or "intimidated" by a laugh or two...please let me know if youre adversely triggered by humour, i got a mod warning in another thread for sharing some humour...warning me that it was off topic and might put new users off... :)
 
Last edited:
  • Like
Reactions: Dante63
@Dante63

Hi Dante.
SpO2measuring during sleep, does it work?
Can't enable in SH.
EGC/BP is ok

SM-G998B
SH V. 6.18.8.005
SHM V.1.1.1.157

Watch3 (1C28) - SM-R845F
Tizen 5.5.0.2

BRGDS.
Poul.
SpO2 is CSC controlled but let me see what I can do as I have a theory, not sure if it would work on Tizen
 
  • Like
Reactions: Milfeldt2

pebe292

Member
Apr 14, 2011
13
6
Thanks for the new video. I went through the thread but didnt find anything that is the sane problem.

When I put in the IP and press connect I get an error:
Failed to connect, you may get this for the following :
- This remote is already connected by another. Why?
-This remote is running on a non standard port. Which port shall i use? 26101 is used.
- There is no IP adress. Checked, same on pc and watch
 

73sydney

Senior Member
Jul 21, 2018
1,904
1,667
Sydney
Google Pixel 2 XL
Thanks for the new video. I went through the thread but didnt find anything that is the sane problem.

When I put in the IP and press connect I get an error:
Failed to connect, you may get this for the following :
- This remote is already connected by another. Why?
-This remote is running on a non standard port. Which port shall i use? 26101 is used.
- There is no IP adress. Checked, same on pc and watch

First steps of *any* issue that includes networking, take any software out of the equation and start with the basics

1) Are the devices on the same network?
2) Can you ping one device from the other?
 
  • Like
Reactions: Dante63

Top Liked Posts

  • 1
    Simple direct install will update the app you have to the latest...

    Ask all what you want, not bothering at all 😊, now to answer you:
    1) not sure if I understood you quite well, but "1 of the 3 steps mentioned" refers to installing the watch mod, now as I said, if your watch has SHM already with both BP and ECG, just install the phone mod app, if not, then you have to do 1 of the 3 methods to install the mod on your watch...
    2) it is mentioned in features, beginning of the post and in the drive, SHM Features, lockscreen requirement removed on the phone...

    I hope I answered everything 😊
    1) so I can just download to my phone Phone.Tizen.MinSDK24-SHM1.1.1.157.root.**** .apk file and run it?
    Yes I have SHM already on my watch BP and ECG working
    2) was exactly what I was after the lock screen removal.

    Many thanks again for such great and quick response
  • 3
    New languages seem to be stable now (Hindi, Punjabi, Malay & Japanese), if anyone would like to test and verify:
    Tizen Phone apk - Test - Hindi, Punjabi, Japanese & Malay support

    If you face any issues, install the latest version again to overwrite this one...
    2
    New Tutorial Video Uploaded, Old video has been archived...
    2
    Thanks for your reply. I installed "Phone.Tizen.MinSDK24-SHM1.1.1.157.root.detection.country.restriction.removed.dante63.apk" but getting the error that the compatible watch was not found even though the watch is in connected condition. Your old video shown installation of ECG & BP apps after install of the above modded SHM. But these apk wrt to the lastest SHM were not there in gdrive. Pls help
    Check the new video tutorial
    2
    @Dante63

    BTW!
    Denmark :)
    SpO2 is ok on watch, widget too. I am VERY keen on getting it to measure during sleep, my deep sleep is LOOW!
    What is sleep...?
    (Joking since I sleep 3-5 hours)
    2
    @Dante63

    Hi Dante.
    SpO2measuring during sleep, does it work?
    Can't enable in SH.
    EGC/BP is ok

    SM-G998B
    SH V. 6.18.8.005
    SHM V.1.1.1.157

    Watch3 (1C28) - SM-R845F
    Tizen 5.5.0.2

    BRGDS.
    Poul.
  • 136
    Hello Everyone,
    I hope you all are fine...


    Tizen-Lockup-On-Light-RGB.png


    ~~~ TIZEN WATCHES ONLY ~~~
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0049...
    • BUGS: None that I know of...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • IMPORTANT NOTE ABOUT POSTING: Please search the thread first before posting your problem, provide details, screenshot, videos if possible, do not just say "it's not working" or "it's crashing", details are important if you want me to help you and to get it fast...
    • FUTURE WORKS: nothing yet on my mind...

    ~~~ FOR WearOS (Watch4 And Above), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Run_me.bat Java "main" errors and JDK15.
      Open CMD and type 'Java --version', if it doesn't say Java 15, then you will struggle with such error, uninstall any JDK and reinstall JDK 15, run the command again, you should see Java 15...
    6. Connecting to the watch isn't working.
      Firewall, antivirus, defender, anything that filters the internet can block the connection of the watch, so make sure to disable all internet security, if it doesn't connect yet, reboot the pc and the watch and try again...

    ~~~ HOW SHM MOD BEHAVE WHEN RUNNING FOR THE FIRST TIME ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/8QLH04Cu5gA

    ...This is not the latest version, this is just to show you how the app is supposed to work regardless of the version...

    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...
    ~~~ Tizen - Active2 & Watch3 - How to install SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/6foHp4LDVd0

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - TIZEN - SHM No Root, Country, Device, Update, Age Detection + Watch SHM MOD

    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_201440606.jpgInShot_20210411_232636295.jpgInShot_20210411_232542732.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!
    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SHM 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SHM 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install...
    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC

    I will list all countries later as Country Codes Alpha-2...

    SHM will work only if you are not rooted, have no busybox and have none of the following apps installed.:

    I will list all applications again, list is outdated...
    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊 monthly or one time through PayPal ...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    29
    Changelog,
    Latest Changes:

    --- 17th October 2021 - testing complete - introducing 4 new languages, Hindi, Punjabi, Japanese and Malay...

    --- 5th October 2021 - Edited the Fit2Installer "Run Me.bat", now it will check for the java version and will tell you from the beginning whether you have JDK15 or something else and whether you will face issues or not, so no one posts about JAVA "main" error again unless JDK is 15 and the error still exist, I wish to eliminate the repeated error of not installing or using JDK15 and also eliminate repeated posts that are about JDK15, do not post about having an error in Fit2Installer if you did not install JDK15 or have other JDKs installed...
    --- 27th September 2021 - some users reported that sync stopped in new Samsung Health, when investigated, the new update was a major update and it reset set features back to original values, it did not break the sync, do the required changes again in set features of Samsung Health and check that SHM permissions are still enabled and the sync will work again...
    --- 26th September 2021 - Added Vietnamese Language support to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...
    --- 24th September 2021 - Added Chinese Simplified Language to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor... New Tutorial Video Uploaded...
    --- 20th September 2021 - Google Drive updated and changed the entire structure and contents...
    --- 19th September 2021 - Patched Watch SHM 1.1.0049 wgt, removed ECG and BP standalones, I will tidy google drive and recreate the video Tutorial, make it much simpler for you guys... Updated media photos in Post#3...
    --- 15th September 2021 - Uploaded installer for Watch SHM 1.1.0049 wgt...
    --- 9th September 2021 - Patched and released Tizen SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 23rd Aug 2021 - added a Tizen logo into version 153 and changed app version label included tizen, this is just to ensure that you don't use Tizen SHM with Watch4 because it's not compatible, changed the message when no watch is connected to "To use this feature, you need Galaxy Watch Active 2 or Galaxy Watch 3 that was released in a country where this feature has been approved." and finally, on my google drive, I renamed all phone apk files to include "Phone.Tizen." at the beginning of the name, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    --- 22nd Aug 2021 - created a thread for watch4, this thread will be only for Tizen devices...
    --- 21st Aug 2021 - Watch4 mystery is revealed after long hours of dedication and with the help of different amazing members on Telegram (specifically Italy, love you all and never forget 🤌🏻 lol) and on reddit, the shm mod and watch4 is working but the process is different than the tizen watches, the mod is still being tested and still looking to improve it a bit, it works only on watch4, I will release it when I think it's perfect and has no flaws, I say in a day or two...
    --- 17th Aug 2021 - More patches applied to SHM 1.1.1.153 and 1.1.1.151... I also made an installer that would push SHM 47 to the watch... I'm still investigating the matter in regards to the watch 4 detection issues through logcat of users, if I can't fix it, I will probably be able to do more when I get the watch on 10th of September...
    --- 13th Aug 2021 - Released SHM 1.1.1.153 and patched 1.1.1.151, when no watch is connected, it will show a message instead of a black screen...
    --- 12th Aug 2021 - Fixed SHM 1.1.1.151 issue when trying to accept, you should not face any issues...
    --- 11th Aug 2021 - Released SHM 1.1.1.151, it has a bug where if running for the first time, you cannot proceed after hitting accept, so install the previous version of SHM 1.1.0.193, hit accept and finish the profile then update till I release a fix. I also removed from my Drive SHM 175 as it is deprecated, there is no use in having it anymore since you can't update from 175 to anything newer...
    --- 8th Aug 2021 - Fixed Samsung Health interference with Samsung Health Monitor, it shouldn't crash anymore and all SHM MODs have been signed with release-keys of my own, this will ensure that my work wouldn't be tampered with or Modified for whatever purposes, if you install an update of SHM MOD from other sources and it fails, that means it has been tampered with, not released by me...
    --- 7th Aug 2021 - Found out latest Samsung Health breaks SHM sometimes, workaround is uninstalling both, install SHM first, finish the profile then install Samsung Health again, DO NOT ENABLE THE SYNC INSIDE SHM DATA WITH SAMSUNG HEALTH... I will try my best to find time to investigate this and fix it... I also would like to add that "set features" was accidentally released to the public according to Samsung support, version 6.16 is the latest, I will investigate this as well to see if there is a solution, as a workaround, you can always downgrade Samsung Health, sync the BP and upgrade Samsung Health again... and finally, I did make a patreon page and I'd appreciate your support if you can, I believe that is everything in August for now...
    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...
    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    15
    SHM MOD Phone Media:
    Screenshot_20210919-153730_One UI Home.jpg20210919_153850.jpg20210919_153839.jpg20210919_153828.jpg
    SHM MOD Watch Media:
    Screen_20210919_134630.pngScreen_20210919_134641.png
    Ways to differentiate between MOD and original, and in galaxy wearable app:
    Screenshot_20210919-134811_Galaxy Watch3 PlugIn.jpg
    13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    7
    I am going to start organizing the Thread for Watch4 *Excitement* lol