• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RESTRICTIONS-REMOVED] Samsung Health Monitor - TIZEN - 1.1.1.157 - Root, Age, Country & Device Restriction Removed - 26th September 2021

Was this useful and you were satisfied with the outcome...?


  • Total voters
    324
Search This thread
Check your Networkconnection and try it again :)

Edit: Title is something like "Setup of the App not possible"
Wait, that's Samsung Health, not SHM...
I was looking in the wrong place, ah, I could suggest VPN won't work and I believe tethering also won't work (connection has a VPN), it needs to be a direct network...
 
  • Like
Reactions: vasoulitos

bg70soft

New member
Nov 15, 2016
2
1
Thanks It's working fine with my Xiaomi note 8 pro phone
 

Attachments

  • ecg1.jpg
    ecg1.jpg
    264 KB · Views: 19
  • ecg3.jpg
    ecg3.jpg
    70.4 KB · Views: 19
  • ecg2.jpg
    ecg2.jpg
    104.2 KB · Views: 19
  • Like
Reactions: Dante63

peh6088

Member
May 11, 2011
13
4
Wellington
Hi dante, first of all, thanks for making this mod. I've managed to install SHM on my phone, BP and ECG on my watch using method 1 (install apk). However, whenever I try to measure my ECG, it'll never work. All I get is "make sure the watch is snugon my wrist", "moisturize my skin", "wear the watch for 10 minutes" which I've all tried. Any idea on how to make it work? Thanks in advance.
 
successfuly installed ECG
but BP emits this error log in device manager: failure occures in step checkPackageVersion
Because your watch already has BP with max version to prevent people sideloading the original BP...

So you need to sign and install the modified BP...
Hi dante, first of all, thanks for making this mod. I've managed to install SHM on my phone, BP and ECG on my watch using method 1 (install apk). However, whenever I try to measure my ECG, it'll never work. All I get is "make sure the watch is snugon my wrist", "moisturize my skin", "wear the watch for 10 minutes" which I've all tried. Any idea on how to make it work? Thanks in advance.
Turn off the watch, Wash the watch under warm water to make sure no dirt or oil is stuck on the probe and sensors, dry it very well with tissue, do not air dry it, turn it on, swipe down from the top and enable the water lock then disable it, it will play a sound to push any water in the speaker out, give it a good shake...

Try the ECG again and hopefully your issue is resolved...
Hi

Just received my Galaxy Watch 3 today and going through the long process. I am stuck at creating the distributor certificate. My watch is connected by wifi but no DUID is being prepopulated under Add individual DUIDs. What did I do wrong and how do I fix it, please?
Did you connect it through the device manager? If yes, is your watch developer mode and debugging mode both turned on?
 

quantumdot

Member
Jan 12, 2019
6
2
Hi! My Samsung galaxy watch 3 came without samsung health manager and those widgets, so the easier way should be possible.
I install samsung health and sign in etc, install modified Samsung Health monitor provided here, sign in and accept terms. It shows No compatible watch found, as expected.

However, when try to install BP or ECG installer apks, absolutely nothing happens - they do not even give me the optionn to push anything to my watch, no fails no anything. Just the app installs and nothing else can be done there. In Galaxy Wearable app, watch is connected and everything. Using Xiaomi Mi 10t pro.
I also tried to make signed apks, nothing changes.

Does anybody have idea what the problem might be?
Thank you
 
Hi! My Samsung galaxy watch 3 came without samsung health manager and those widgets, so the easier way should be possible.
I install samsung health and sign in etc, install modified Samsung Health monitor provided here, sign in and accept terms. It shows No compatible watch found, as expected.

However, when try to install BP or ECG installer apks, absolutely nothing happens - they do not even give me the optionn to push anything to my watch, no fails no anything. Just the app installs and nothing else can be done there. In Galaxy Wearable app, watch is connected and everything. Using Xiaomi Mi 10t pro.
I also tried to make signed apks, nothing changes.

Does anybody have idea what the problem might be?
Thank you
It happens sometimes that you don't get promoted about installing unknown sources, so open galaxy wearables and go to about watch and toggle allow installation of unknown sources then install the BP & ECG installers again and it should work (you could go with SHM installer if you would like instead of Standalones)
 

quantumdot

Member
Jan 12, 2019
6
2
It happens sometimes that you don't get promoted about installing unknown sources, so open galaxy wearables and go to about watch and toggle allow installation of unknown sources then install the BP & ECG installers again and it should work (you could go with SHM installer if you would like instead of Standalones)
Thank you very much, it helped. Only for ECG though, for some reason BP doesn't work, it shoes it is transferring to the watch, no fail or anything, but after that there is no app on the watch and also in SMH for BP it shows no compatible watch.
 
Thank you very much, it helped. Only for ECG though, for some reason BP doesn't work, it shows it is transferring to the watch, no fail or anything, but after that there is no app on the watch and also in SMH for BP it shows no compatible watch.
I noticed that some people with the latest tizen update not having anything are also facing issues with BP, so my guess is that samsung decided to push a dummy BP and disable it so no one can sideload and use the BP...

So Sign & Install the modified BP and it will work...
 

bejvalo

New member
Dec 10, 2015
1
0
I noticed that some people with the latest tizen update not having anything are also facing issues with BP, so my guess is that samsung decided to push a dummy BP and disable it so no one can sideload and use the BP...

So Sign & Install the modified BP and it will work...
i have same problem like you. EKG is ok (thank you guys) but no PB app in watch and no compatible watch in SHM in BP area.
 

Attachments

  • 8wU73Hn.jpg
    8wU73Hn.jpg
    236.7 KB · Views: 23
  • vEW2QeO.jpg
    vEW2QeO.jpg
    172.6 KB · Views: 22
i have same problem like you. EKG is ok (thank you guys) but no PB app in watch and no compatible watch in SHM in BP area.
It's not a problem at all, I definitely need to make a second video and call it F.A.Q hopefully it would explain to everyone the missing point, if the installation fails it means your watch has BP disabled and with version probably 99.99.99 or something so you can never install older BP version and enable it, hence why I keep saying, if it fails, go to the alternative way, grab the modified BP, sign it and then install it
 
  • Like
Reactions: p51d007

Neowtf87

New member
Jul 23, 2021
1
1
I try four hour to install successfully, thanks master Dante63
you save my galaxy watch 3
now only little problem is I couldn't find set feature button in my new version SH
I may try old one
21024.jpg
 

Attachments

  • 21025.jpg
    21025.jpg
    43.7 KB · Views: 14
  • Like
Reactions: Dante63

pireek1

New member
Jul 25, 2021
2
0
Want to say first of all thank you for the great work! I have a GW3 connected to an iPhone 12. Can your process allow me to get BP & ECG on the watch as I do not have an Android phone?
 

Top Liked Posts

  • 1
    First. Mad respect for your work!
    In Canada, I am Watch 4 46mm LTE and Wife Active 2. Both S20+

    Did the install a few weeks ago and excited to see BP sync coming.

    My system monitors oxygen levels. But the active 2 is not. Is this something that comes as part of the package you put together or do we have to wait for Samsung to allow it here?

    Do the country restrictions that block oxygen tracking differ from the BP and ECG ones?

    Hopefully, I will have time to install tomorrow.
    Thank you again for your work!
  • 2
    sorrry l leave the message on the wrong post . my question is about wear os galaxy watch 4, no side-effect for galaxy watch 4 ? thank you very much for the reply.
    It's ok, the answer is the same...
    For both Tizen & WearOS:
    no root, no warranty void, no knox tripped...
    It's 100% safe with no side-effects...
    2
    Help wanted for Tizen watches, if you can help and provide logs, it may allow me to simplify the process of having BP and ECG on your watch to only installing the phone app...

    If you can help, please let me know...
    Watch the video if you want to know more details:

    Keep in mind, you'll need to uninstall the standalone widget, do not logcat if you have standalone widgets, I need only SHM on the watch
    2
    @Dante , all

    Just a quick note that if you reset your phone/flash a new ROM, even if you restore your app data, you will have to go back to Samsung Health 6.16 and set the features, then upgrade again to have BP sync working again
    I'm actually surprised that it works that way, despite it didn't work on 6.17, it just feels like unstable, hence why I will add download BP data, I think that feature would be a great add
    2
    IMPORTANT ANNOUNCEMENT:
    I'm currently working on my google drive, please wait patiently for new drive files and new easier tutorial...

    Sorry for inconvenience, I know you're excited to get these features, I'll try to finish everything as fast as I can...
    2
    i started logcat reader and afterwards SHM and shared the file afterwards, so it should contain the crash.
    I will have a look when I get time, do me a favor and install the original SHM and tell me what happens, this test will tell me whether the MOD needs patch or your device can't start SHM at all
    Sync works only with 6.16, but few reported that the sync stays on after updating from 6.16, there is an entire section on how to enable the sync on 6.16
  • 127
    Hello Everyone,
    I hope you all are fine...


    Tizen-Lockup-On-Light-RGB.png


    ~~~ TIZEN WATCHES ONLY ~~~
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0049...
    • BUGS: None that I know of...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • IMPORTANT NOTE ABOUT POSTING: Please search the thread first before posting your problem, provide details, screenshot, videos if possible, do not just say "it's not working" or "it's crashing", details are important if you want me to help you and to get it fast...
    • FUTURE WORKS: nothing yet on my mind...

    ~~~ FOR WearOS (Watch4 And Above), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Run_me.bat Java "main" errors and JDK15.
      Open CMD and type 'Java --version', if it doesn't say Java 15, then you will struggle with such error, uninstall any JDK and reinstall JDK 15, run the command again, you should see Java 15...
    6. Connecting to the watch isn't working.
      Firewall, antivirus, defender, anything that filters the internet can block the connection of the watch, so make sure to disable all internet security, if it doesn't connect yet, reboot the pc and the watch and try again...

    ~~~ HOW SHM MOD BEHAVE WHEN RUNNING FOR THE FIRST TIME ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/8QLH04Cu5gA

    ...This is not the latest version, this is just to show you how the app is supposed to work regardless of the version...

    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...
    ~~~ Tizen - Active2 & Watch3 - How to install SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/6foHp4LDVd0

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - TIZEN - SHM No Root, Country, Device, Update, Age Detection + ECG-BP-installer / BP-installer / ECG-installer


    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_201440606.jpgInShot_20210411_232636295.jpgInShot_20210411_232542732.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!
    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SHM 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SHM 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install...
    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC

    I will list all countries later as Country Codes Alpha-2...

    SHM will work only if you are not rooted, have no busybox and have none of the following apps installed.:

    I will list all applications again, list is outdated...
    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    27
    Changelog,
    Latest Changes:

    --- 26th September 2021 - Added Vietnamese Language support to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...

    --- 24th September 2021 - Added Chinese Simplified Language to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor... New Tutorial Video Uploaded...
    --- 20th September 2021 - Google Drive updated and changed the entire structure and contents...
    --- 19th September 2021 - Patched Watch SHM 1.1.0049 wgt, removed ECG and BP standalones, I will tidy google drive and recreate the video Tutorial, make it much simpler for you guys... Updated media photos in Post#3...
    --- 15th September 2021 - Uploaded installer for Watch SHM 1.1.0049 wgt...
    --- 9th September 2021 - Patched and released Tizen SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 23rd Aug 2021 - added a Tizen logo into version 153 and changed app version label included tizen, this is just to ensure that you don't use Tizen SHM with Watch4 because it's not compatible, changed the message when no watch is connected to "To use this feature, you need Galaxy Watch Active 2 or Galaxy Watch 3 that was released in a country where this feature has been approved." and finally, on my google drive, I renamed all phone apk files to include "Phone.Tizen." at the beginning of the name, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    --- 22nd Aug 2021 - created a thread for watch4, this thread will be only for Tizen devices...
    --- 21st Aug 2021 - Watch4 mystery is revealed after long hours of dedication and with the help of different amazing members on Telegram (specifically Italy, love you all and never forget 🤌🏻 lol) and on reddit, the shm mod and watch4 is working but the process is different than the tizen watches, the mod is still being tested and still looking to improve it a bit, it works only on watch4, I will release it when I think it's perfect and has no flaws, I say in a day or two...
    --- 17th Aug 2021 - More patches applied to SHM 1.1.1.153 and 1.1.1.151... I also made an installer that would push SHM 47 to the watch... I'm still investigating the matter in regards to the watch 4 detection issues through logcat of users, if I can't fix it, I will probably be able to do more when I get the watch on 10th of September...
    --- 13th Aug 2021 - Released SHM 1.1.1.153 and patched 1.1.1.151, when no watch is connected, it will show a message instead of a black screen...
    --- 12th Aug 2021 - Fixed SHM 1.1.1.151 issue when trying to accept, you should not face any issues...
    --- 11th Aug 2021 - Released SHM 1.1.1.151, it has a bug where if running for the first time, you cannot proceed after hitting accept, so install the previous version of SHM 1.1.0.193, hit accept and finish the profile then update till I release a fix. I also removed from my Drive SHM 175 as it is deprecated, there is no use in having it anymore since you can't update from 175 to anything newer...
    --- 8th Aug 2021 - Fixed Samsung Health interference with Samsung Health Monitor, it shouldn't crash anymore and all SHM MODs have been signed with release-keys of my own, this will ensure that my work wouldn't be tampered with or Modified for whatever purposes, if you install an update of SHM MOD from other sources and it fails, that means it has been tampered with, not released by me...
    --- 7th Aug 2021 - Found out latest Samsung Health breaks SHM sometimes, workaround is uninstalling both, install SHM first, finish the profile then install Samsung Health again, DO NOT ENABLE THE SYNC INSIDE SHM DATA WITH SAMSUNG HEALTH... I will try my best to find time to investigate this and fix it... I also would like to add that "set features" was accidentally released to the public according to Samsung support, version 6.16 is the latest, I will investigate this as well to see if there is a solution, as a workaround, you can always downgrade Samsung Health, sync the BP and upgrade Samsung Health again... and finally, I did make a patreon page and I'd appreciate your support if you can, I believe that is everything in August for now...
    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...
    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    14
    SHM MOD Phone Media:
    Screenshot_20210919-153730_One UI Home.jpg20210919_153850.jpg20210919_153839.jpg20210919_153828.jpg
    SHM MOD Watch Media:
    Screen_20210919_134630.pngScreen_20210919_134641.png
    Ways to differentiate between MOD and original, and in galaxy wearable app:
    Screenshot_20210919-134811_Galaxy Watch3 PlugIn.jpg
    13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    7
    I am going to start organizing the Thread for Watch4 *Excitement* lol