• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Was this useful and you were satisfied with the outcome...?


  • Total voters
    341
Search This thread
Hi Dante. Will it be possible to install the wear os system from the recent watch 4 on the galaxy watch 3? Is there any way to make the saturation measure automatically? Thank
Wear OS and Tizen have different processors and hardware because they're different operating systems and no one did anything yet, and even if it worked, you might faces lags and sensors failure so it's not worth porting WearOS to Tizen watch3, just save, sell watch3 and get a watch4 🤷🏻‍♂️
 

indiana71

Member
Jan 13, 2011
5
0
@Dante63

Into SHM Tizen / Original & Modified Tpks / Original TPKs / Modified Unsigned TPKs
I found only two files: modified_BP.tpk and modified_ECG.tpk

Maybe the other aren't visible?

Or the file you mentioned is here?
SHM Tizen / Original & Modified Tpks / Original TPKs / shm49_international.wgt
 

indiana71

Member
Jan 13, 2011
5
0
@Dante63

Into SHM Tizen / Original & Modified Tpks / Original TPKs / Modified Unsigned TPKs
I found only two files: modified_BP.tpk and modified_ECG.tpk

Maybe the other aren't visible?

Or the file you mentioned is here?
SHM Tizen / Original & Modified Tpks / Original TPKs / shm49_international.wgt


After signed it, deleted from the watch ECG.tpk and BP.tpk , I try to install shm49 via Fit2Install and I receive an error

WARNING: Your data is to be sent over an unencrypted connection and could be read by others.
pushed shm49_international.wgt 100% 4088KB 0KB/s
1 file(s) pushed. 0 file(s) skipped.
.\install_me\shm49_international.wgt 3050KB/s (4186753 bytes in 1.340s)
path is /home/owner/share/tmp/sdk_tools/shm49_international.wgt
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[start] val[update]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[install_percent] val[10]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[error] val[-1]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[end] val[fail]
processing result : General error [-1] failed
spend time for pkgcmd is [2518]ms
 
After signed it, deleted from the watch ECG.tpk and BP.tpk , I try to install shm49 via Fit2Install and I receive an error

WARNING: Your data is to be sent over an unencrypted connection and could be read by others.
pushed shm49_international.wgt 100% 4088KB 0KB/s
1 file(s) pushed. 0 file(s) skipped.
.\install_me\shm49_international.wgt 3050KB/s (4186753 bytes in 1.340s)
path is /home/owner/share/tmp/sdk_tools/shm49_international.wgt
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[start] val[update]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[install_percent] val[10]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[error] val[-1]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.health.samd.bp] key[end] val[fail]
processing result : General error [-1] failed
spend time for pkgcmd is [2518]ms
It will fail to install because you signed it, it has Samsung signature, you should be able to install it directly
 

indiana71

Member
Jan 13, 2011
5
0
It will fail to install because you signed it, it has Samsung signature, you should be able to install it directly
Tryed also with the version you release into GDrive. Same problem: I cannot install, with and without BP.tpk/ECG.tpk standalone installed. (I use Fit2Install)

In attach photo from where I taken files.
I'm thinking ... Do you have a directory not shared with other user?

I used, in the past, shm39 patched version in my smartwatch.
 

Attachments

  • IMG_20210918_103929.jpg
    IMG_20210918_103929.jpg
    8.4 MB · Views: 23
  • IMG_20210918_103916.jpg
    IMG_20210918_103916.jpg
    6.7 MB · Views: 23
  • IMG_20210918_103905.jpg
    IMG_20210918_103905.jpg
    7.5 MB · Views: 20
Tryed also with the version you release into GDrive. Same problem: I cannot install, with and without BP.tpk/ECG.tpk standalone installed. (I use Fit2Install)

In attach photo from where I taken files.
I'm thinking ... Do you have a directory not shared with other user?

I used, in the past, shm39 patched version in my smartwatch.
I never patched SHM, perhaps I should do that and let go of ECG and BP, I'll do it today...
 

MOTOR HEAD

New member
Sep 18, 2021
2
1
Dante,
Thanks so much for your help ,
I would like to ask question,

I have bought galaxy watch 4 from a country that Samsung allow ecg and bp in it , the one who bought it for me tried the ECG And BP and it worked on his samsungphone , when I get it in my country that is not allowed to use ECG and my phone is also from my country , I will install the MOD SHM you have created ,

Will it work 🤔?
 
Dante,
Thanks so much for your help ,
I would like to ask question,

I have bought galaxy watch 4 from a country that Samsung allow ecg and bp in it , the one who bought it for me tried the ECG And BP and it worked on his samsungphone , when I get it in my country that is not allowed to use ECG and my phone is also from my country , I will install the MOD SHM you have created ,

Will it work 🤔?
For a moment, I thought I was having a deja vu, but you asked that question on Telegram, didn't you?
 
I decided to remove the standalone BP and ECG, due to being outdated and not English, I will patch the SHM and it will be the tpk/wgt you sign and install on your watch...

Unless someone lends me a hand to see if I can actually enable BP and ECG from the original SHM, it will save a lot of time when you install it, it will be more direct and as simple as installing the phone SHM MOD only, Stay tuned...
 

Desidrummer2112

New member
Oct 2, 2020
3
1
Dante,
I used your alternative method to install your modded SHM and bp tpk on my Samsung fold 3 and it worked like a charm. I had compiled both tpk files but only installed the bp since the ECG tab was already in the app. I'm in the U.S. so bp is not available yet. Just wanted to try it since I had installed them on my OnePlus phone.
Thank you so much for the tutorial.
 
  • Like
Reactions: Dante63

73sydney

Senior Member
Jul 21, 2018
1,890
1,650
Sydney
Google Pixel 2 XL
I have removed BP and ECG now and uploaded the latest SHM MOD for Tizen, this is how it looks and how you can differentiate between them:


View attachment 5413781View attachment 5413783View attachment 5413785

so this is instead of the 2 separate ECG and BP apps?

i tried installing via your installer and its seems to install, the icon shows on watch briefly, and then immediately offers to uninstall

trying again shows a "failed to install" and then immediate offer to uninstall

rebooting both fails to ever allow it to even get as far as the first attempt again...

heading back to the separate apps again i guess :)

p.s. i removed the BP and ECG first....


@Dante63

Umm slight (huge) problem, i now cant reinstall the BP and ECG apps on the watch, any ideas, because this is not good....its giving me the same "failed to install" error as with SHM

Update got ECG back on, but BP (which was the first i tried) still refuses to install...not having fun here :)
 
Last edited:
so this is instead of the 2 separate ECG and BP apps?

i tried installing via your installer and its seems to install, the icon shows on watch briefly, and then immediately offers to uninstall

trying again shows a "failed to install" and then immediate offer to uninstall

p.s. i removed the BP and ECG first....
The installer will install original SHM, I'll tidy the Google drive later, grab the mod from modified tpk folder, you'll see only SHM 49 international mod
 

73sydney

Senior Member
Jul 21, 2018
1,890
1,650
Sydney
Google Pixel 2 XL
The installer will install original SHM, I'll tidy the Google drive later, grab the mod from modified tpk folder, you'll see only SHM 49 international mod

Nope, all i see is shm49_international_mod.wgt

Wont install....because Samsung.TPK.installer.apk wont install to install it

I'd really rather not have to reset both my phone and watch at 10:30PM :) Its a super hassle to get Samsung Pay etc set back up again without it detecting root...

Again, im just trying to get back to where i was before i made the mistake of trying the SHM watch app....ECG is back on, but BP refuses to install...never seen this before, ive installed it many times
 
Last edited:
Nope, all i see is shm49_international_mod.wgt

Wont install....because Samsung.TPK.installer.apk wont install to install it

I'd really rather not have to reset both my phone and watch at 10:30PM :) Its a super hassle to get Samsung Pay etc set back up again without it detecting root...

Again, im just trying to get back to where i was before i made the mistake of trying the SHM watch app....ECG is back on, but BP refuses to install...never seen this before, ive installed it many times
That's the one "shm49_international_mod.wgt", sign it and then install it with either installer or direct from Tizen studio or Fit2Installer...

I'll make a video today hopefully it won't be long or complicated as the first one, a quick step by step straightforward guide...
 

73sydney

Senior Member
Jul 21, 2018
1,890
1,650
Sydney
Google Pixel 2 XL
That's the one "shm49_international_mod.wgt", sign it and then install it with either installer or direct from Tizen studio or Fit2Installer...

I'll make a video today hopefully it won't be long or complicated as the first one, a quick step by step straightforward guide...
yeah, i dont have tizen studio installed, ive reinstalled windows since then, as the ECG and BP apk i have have never failed...

as mentioned earlier installer wont even install on my device to push the .wgt (never used those before)

i just tried fit2install and it wont even connect to the watch...no surprise, its never worked here

This is a nightmare

im just going to reset my watch and install the BP and ECG as it has always been, it will be a miracle if i dont also have to reset my phone to get Samsung Pay working again

Don't ask me why, even though that SHM watch app failed to install (wrong version or not), it completely hosed my watch...

It wasnt clear to me that that SHM .apk wasnt the right one, as it was the only .apk i could see where the version matched your screenshot, i went through every folder ...ive NEVER installed anything as a .wgt file...which is why i thought that cant be right....

Lesson learned, the hard way
 
yeah, i dont have tizen studio installed, ive reinstalled windows since then, as the ECG and BP apk i have have never failed...

as mentioned earlier installer wont even install on my device to push the .wgt (never used those before)

i just tried fit2install and it wont even connect to the watch...no surprise, its never worked here

This is a nightmare

im just going to reset my watch and install the BP and ECG as it has always been, it will be a miracle if i dont also have to reset my phone to get Samsung Pay working again

Don't ask me why, even though that SHM watch app failed to install (wrong version or not), it completely hosed my watch...

It wasnt clear to me that that SHM .apk wasnt the right one, as it was the only .apk i could see where the version matched your screenshot, i went through every folder ...ive NEVER installed anything as a .wgt file...which is why i thought that cant be right....

Lesson learned, the hard way
Sorry for the confusion, maybe I rushed into releasing the update and should've released a video...

You don't need to reset the watch though, let me help you though it and out of it in one piece
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    New languages seem to be stable now (Hindi, Punjabi, Malay & Japanese), if anyone would like to test and verify:
    Tizen Phone apk - Test - Hindi, Punjabi, Japanese & Malay support

    If you face any issues, install the latest version again to overwrite this one...
    2
    New Tutorial Video Uploaded, Old video has been archived...
    2
    Thanks for your reply. I installed "Phone.Tizen.MinSDK24-SHM1.1.1.157.root.detection.country.restriction.removed.dante63.apk" but getting the error that the compatible watch was not found even though the watch is in connected condition. Your old video shown installation of ECG & BP apps after install of the above modded SHM. But these apk wrt to the lastest SHM were not there in gdrive. Pls help
    Check the new video tutorial
    2
    Drive is complete, I will make the video tomorrow, it's 3 AM now (yey for me, got work in few hours lol)

    Anyway, I have rewritten the Fit2Installer into a more user-Friendly way, I provided READ ME files everywhere it may be needed...
    I have placed only JDK15 installer and TizenStudio IDE on the Drive, so no need to look for these files on the internet...
    ApkEasyTool has been uploaded as well with my own configuration is such you shouldn't face issues in compiling and decompiling anything...

    Tizen Folder will contain the required SHM MOD for the watch...

    Everything will be clear when I make the video Tomorrow and hopefully, it will be a shorter video for sure...
    2
    @Dante63

    Hi Dante.
    SpO2measuring during sleep, does it work?
    Can't enable in SH.
    EGC/BP is ok

    SM-G998B
    SH V. 6.18.8.005
    SHM V.1.1.1.157

    Watch3 (1C28) - SM-R845F
    Tizen 5.5.0.2

    BRGDS.
    Poul.
  • 135
    Hello Everyone,
    I hope you all are fine...


    Tizen-Lockup-On-Light-RGB.png


    ~~~ TIZEN WATCHES ONLY ~~~
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0049...
    • BUGS: None that I know of...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • IMPORTANT NOTE ABOUT POSTING: Please search the thread first before posting your problem, provide details, screenshot, videos if possible, do not just say "it's not working" or "it's crashing", details are important if you want me to help you and to get it fast...
    • FUTURE WORKS: nothing yet on my mind...

    ~~~ FOR WearOS (Watch4 And Above), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Run_me.bat Java "main" errors and JDK15.
      Open CMD and type 'Java --version', if it doesn't say Java 15, then you will struggle with such error, uninstall any JDK and reinstall JDK 15, run the command again, you should see Java 15...
    6. Connecting to the watch isn't working.
      Firewall, antivirus, defender, anything that filters the internet can block the connection of the watch, so make sure to disable all internet security, if it doesn't connect yet, reboot the pc and the watch and try again...

    ~~~ HOW SHM MOD BEHAVE WHEN RUNNING FOR THE FIRST TIME ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/8QLH04Cu5gA

    ...This is not the latest version, this is just to show you how the app is supposed to work regardless of the version...

    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...
    ~~~ Tizen - Active2 & Watch3 - How to install SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/6foHp4LDVd0

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - TIZEN - SHM No Root, Country, Device, Update, Age Detection + Watch SHM MOD

    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_201440606.jpgInShot_20210411_232636295.jpgInShot_20210411_232542732.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!
    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SHM 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SHM 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install...
    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC

    I will list all countries later as Country Codes Alpha-2...

    SHM will work only if you are not rooted, have no busybox and have none of the following apps installed.:

    I will list all applications again, list is outdated...
    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊 monthly or one time through PayPal ...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    29
    Changelog,
    Latest Changes:

    --- 5th October 2021 - Edited the Fit2Installer "Run Me.bat", now it will check for the java version and will tell you from the beginning whether you have JDK15 or something else and whether you will face issues or not, so no one posts about JAVA "main" error again unless JDK is 15 and the error still exist, I wish to eliminate the repeated error of not installing or using JDK15 and also eliminate repeated posts that are about JDK15, do not post about having an error in Fit2Installer if you did not install JDK15 or have other JDKs installed...

    --- 27th September 2021 - some users reported that sync stopped in new Samsung Health, when investigated, the new update was a major update and it reset set features back to original values, it did not break the sync, do the required changes again in set features of Samsung Health and check that SHM permissions are still enabled and the sync will work again...
    --- 26th September 2021 - Added Vietnamese Language support to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...
    --- 24th September 2021 - Added Chinese Simplified Language to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor... New Tutorial Video Uploaded...
    --- 20th September 2021 - Google Drive updated and changed the entire structure and contents...
    --- 19th September 2021 - Patched Watch SHM 1.1.0049 wgt, removed ECG and BP standalones, I will tidy google drive and recreate the video Tutorial, make it much simpler for you guys... Updated media photos in Post#3...
    --- 15th September 2021 - Uploaded installer for Watch SHM 1.1.0049 wgt...
    --- 9th September 2021 - Patched and released Tizen SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 23rd Aug 2021 - added a Tizen logo into version 153 and changed app version label included tizen, this is just to ensure that you don't use Tizen SHM with Watch4 because it's not compatible, changed the message when no watch is connected to "To use this feature, you need Galaxy Watch Active 2 or Galaxy Watch 3 that was released in a country where this feature has been approved." and finally, on my google drive, I renamed all phone apk files to include "Phone.Tizen." at the beginning of the name, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    --- 22nd Aug 2021 - created a thread for watch4, this thread will be only for Tizen devices...
    --- 21st Aug 2021 - Watch4 mystery is revealed after long hours of dedication and with the help of different amazing members on Telegram (specifically Italy, love you all and never forget 🤌🏻 lol) and on reddit, the shm mod and watch4 is working but the process is different than the tizen watches, the mod is still being tested and still looking to improve it a bit, it works only on watch4, I will release it when I think it's perfect and has no flaws, I say in a day or two...
    --- 17th Aug 2021 - More patches applied to SHM 1.1.1.153 and 1.1.1.151... I also made an installer that would push SHM 47 to the watch... I'm still investigating the matter in regards to the watch 4 detection issues through logcat of users, if I can't fix it, I will probably be able to do more when I get the watch on 10th of September...
    --- 13th Aug 2021 - Released SHM 1.1.1.153 and patched 1.1.1.151, when no watch is connected, it will show a message instead of a black screen...
    --- 12th Aug 2021 - Fixed SHM 1.1.1.151 issue when trying to accept, you should not face any issues...
    --- 11th Aug 2021 - Released SHM 1.1.1.151, it has a bug where if running for the first time, you cannot proceed after hitting accept, so install the previous version of SHM 1.1.0.193, hit accept and finish the profile then update till I release a fix. I also removed from my Drive SHM 175 as it is deprecated, there is no use in having it anymore since you can't update from 175 to anything newer...
    --- 8th Aug 2021 - Fixed Samsung Health interference with Samsung Health Monitor, it shouldn't crash anymore and all SHM MODs have been signed with release-keys of my own, this will ensure that my work wouldn't be tampered with or Modified for whatever purposes, if you install an update of SHM MOD from other sources and it fails, that means it has been tampered with, not released by me...
    --- 7th Aug 2021 - Found out latest Samsung Health breaks SHM sometimes, workaround is uninstalling both, install SHM first, finish the profile then install Samsung Health again, DO NOT ENABLE THE SYNC INSIDE SHM DATA WITH SAMSUNG HEALTH... I will try my best to find time to investigate this and fix it... I also would like to add that "set features" was accidentally released to the public according to Samsung support, version 6.16 is the latest, I will investigate this as well to see if there is a solution, as a workaround, you can always downgrade Samsung Health, sync the BP and upgrade Samsung Health again... and finally, I did make a patreon page and I'd appreciate your support if you can, I believe that is everything in August for now...
    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...
    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    15
    SHM MOD Phone Media:
    Screenshot_20210919-153730_One UI Home.jpg20210919_153850.jpg20210919_153839.jpg20210919_153828.jpg
    SHM MOD Watch Media:
    Screen_20210919_134630.pngScreen_20210919_134641.png
    Ways to differentiate between MOD and original, and in galaxy wearable app:
    Screenshot_20210919-134811_Galaxy Watch3 PlugIn.jpg
    13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    7
    I am going to start organizing the Thread for Watch4 *Excitement* lol