Was this useful and you were satisfied with the outcome...?


  • Total voters
    454
Search This thread

Cantor2011

New member
May 31, 2011
3
2
I found the instructions very clear but I am having some problems. I have a Galaxy Watch 3 and an S21 Ultra.

Having installed the extensions in Package Manager, when I try to open Device Manager in Tizen Studio, nothing happens. I have tried a few times. I can launch the remote device manager from the dropdown box, and this allows me to go ahead and create the certificates.

I then use Fit2Installer to sign the app.

I cannot use Device Manager to install it as I cannot open Device Manager, as mentioned above.

I then try with using option 2 of Fit2Installer but that says the version of SDB client (2.3.0) is not same with that of SDB server (4.2.16) and won't install it.

So I try with APK Easy Tool but after about 20 seconds the phone says 'Failed to install app'.

Any idea what I can do about these issues?
Hi there,
I had exactly same issues. I had to run Fit2Installer a couple of times to recognise the certificates and then ignored the SDB server messages.
 
Hi there,
I had exactly same issues. I had to run Fit2Installer a couple of times to recognise the certificates and then ignored the SDB server messages.
Check task manager, look for sdb... if that is running, terminate it and Fit2Installer should run normally...

You see the error because Fit2Installer is running sdb and tizen-studio has a running sdb
 

Frankyg

Senior Member
Hey thanks for this, I've done all the steps (for Active2 watch) and I've installed on my Oneplus 6T (Android 11, OOS 11.1.2.2). Installed Tizen SHM MOD 1.1.1.171. My Oneplus is Rooted with Magisk and has TWRP Recovery, if that makes any difference.

Everything seems to go as per the instructions, only point where it fails is opening Samsung Health Monitor on Phone - getting the message 'No Compatible Watch found'. Although the watch is definitely connected via bluetooth. If I go to the Accessories section, then click on Pair My Watch, it opens the main page of the Wearable app which displays Galaxy Watch Active2, with battery life etc etc. all displayed.

Checked the Data section, both permissions are visible and toggled ON.

In the Wearables app, About Watch - Install unknown apps is set to ON.

I really can't think of anything I've missed in the setup, can you provide any suggestion or do you need some additional information first?
oh, I'm in Australia.
 
Hey thanks for this, I've done all the steps (for Active2 watch) and I've installed on my Oneplus 6T (Android 11, OOS 11.1.2.2). Installed Tizen SHM MOD 1.1.1.171. My Oneplus is Rooted with Magisk and has TWRP Recovery, if that makes any difference.

Everything seems to go as per the instructions, only point where it fails is opening Samsung Health Monitor on Phone - getting the message 'No Compatible Watch found'. Although the watch is definitely connected via bluetooth. If I go to the Accessories section, then click on Pair My Watch, it opens the main page of the Wearable app which displays Galaxy Watch Active2, with battery life etc etc. all displayed.

Checked the Data section, both permissions are visible and toggled ON.

In the Wearables app, About Watch - Install unknown apps is set to ON.

I really can't think of anything I've missed in the setup, can you provide any suggestion or do you need some additional information first?
oh, I'm in Australia.
Do you have SHM installed on your watch? If yes, Original or MOD?

Try running SHM on your watch and hit open on phone perhaps
 

Emmes

Senior Member
Nov 21, 2012
134
76
Vienna
here a short tutorial for arch/manjaro users to install Tizen Studio and use it to sign and install wgt:

1. Install Tizen Studio via:


2. Then install webkitgtk2 3:2.4.11-26 from AUR (it takes a while to compile) ,otherwise you cant connect to your Samsung Login.

Then follow the steps provided in OP to get the Samsung Certificates etc...

3. use tizen cli to sign wgt:

in your tizen studio install folder you find the tizen cli command ( ~/tizen-studio/tools/ide/bin )

./tizen package -t wgt -s NAMEOFYOURCREATEDCERTIFICATE -- /path to your .wgt (this will override the original wgt and sign it)

4. To install the app i used the tizen device manager (right click on SM-R840 or similar -> install App )



All credits to @Dante63 , Toxblh at Github, and Diego Cobain at youtube, etc...
 
Last edited:

conbak49

Senior Member
May 7, 2012
190
51
Just wanted to say this worked great once I was able to get the watch connected to Tizen studio. I had toggle off and on a few times, but it finally connected. Then it was smooth sailing. I think I had to restart both the phone and the watch once everything was done to get them talking to each other. THANKS!
 
  • Like
Reactions: Dante63

conbak49

Senior Member
May 7, 2012
190
51
Hey thanks for this, I've done all the steps (for Active2 watch) and I've installed on my Oneplus 6T (Android 11, OOS 11.1.2.2). Installed Tizen SHM MOD 1.1.1.171. My Oneplus is Rooted with Magisk and has TWRP Recovery, if that makes any difference.

Everything seems to go as per the instructions, only point where it fails is opening Samsung Health Monitor on Phone - getting the message 'No Compatible Watch found'. Although the watch is definitely connected via bluetooth. If I go to the Accessories section, then click on Pair My Watch, it opens the main page of the Wearable app which displays Galaxy Watch Active2, with battery life etc etc. all displayed.

Checked the Data section, both permissions are visible and toggled ON.

In the Wearables app, About Watch - Install unknown apps is set to ON.

I really can't think of anything I've missed in the setup, can you provide any suggestion or do you need some additional information first?
oh, I'm in Australia.
I had this issue too - everything installed where it should be, but phone didn't recognize watch app (GW3). I restarted both the phone and the watch and that fixed it.
 
  • Like
Reactions: Dante63

alaintroll

New member
Apr 10, 2018
3
0
Hi there! I have been using this mod for a couple of months now, but still having the same issue: I need to calibrate several times in order to be able to measure BP. It constantly forgets I just recalibrate it. I did the process a few hours ago, and I just checked and asks me again to calibrate the watch. I have an Active 2 and a Galaxy S10+ 975F in Android 11 with November security patch. I also disabled stock Samsung Monitor apps in both watch and phone. Could you help me? Thanks
 
Hi there! I have been using this mod for a couple of months now, but still having the same issue: I need to calibrate several times in order to be able to measure BP. It constantly forgets I just recalibrate it. I did the process a few hours ago, and I just checked and asks me again to calibrate the watch. I have an Active 2 and a Galaxy S10+ 975F in Android 11 with November security patch. I also disabled stock Samsung Monitor apps in both watch and phone. Could you help me? Thanks
This i have seen during my testing...
Having original shm on the watch as a widget or visible in app drawer triggers to prepare shm on your phone, if the shm on your phone is being used by the mod, the original shm breaks calibration, if you calibrate, you have linked the calibration with original shm, which later the shm mod on your watch breaks the calibration and you calibrate with the mod...

Try to make sure original shm is not in the app drawer (hide it using Galaxy Wearables) and no widgets on screen and restart your watch, this will prevent original shm from running if it's in the hidden list and you'll have only the mod running, your calibration after that shouldn't break anymore hopefully...
 

Manfred38

New member
Jan 9, 2022
1
1
I am german and new here. Dante63, you made a great job. My englisch is not good, excuse me.
Despite many error messages by signing-process (java "main", sdb server version ...) it works
perfect on my OnePlus 8 Pro. Many, many thanks!!
 
  • Like
Reactions: Dante63
Jan 27, 2017
10
4
I have been using BP/ECG app after compiling it nearly 5 weeks ago - come across a strange issue and not sure if its a bug or a problem with the app.

After 28 day I was asked to recalibrate the watch - this was 8 days ago. I this 8 day period I was forced to recalibrate 4 times else the app stopped working as usual and just gave me the option to open the app on the phone with the option to calibrate.

Any ideas on this and can you deactivate the 28 day calibration.

Your help in this matter would be appreciated.

Regards to all.
 
I have been using BP/ECG app after compiling it nearly 5 weeks ago - come across a strange issue and not sure if its a bug or a problem with the app.

After 28 day I was asked to recalibrate the watch - this was 8 days ago. I this 8 day period I was forced to recalibrate 4 times else the app stopped working as usual and just gave me the option to open the app on the phone with the option to calibrate.

Any ideas on this and can you deactivate the 28 day calibration.

Your help in this matter would be appreciated.

Regards to all.
This has been discussed before on the WearOS version, i am considering now updating the thread later and adding about this to the FAQ section, calibration is done every 28 days, I can change that but I wouldn't want to do so for 1 reason, since this logic is created by Samsung and they put it for the sake of accuracy of readings and perhaps other medical reasons, me removing or extending it may give inaccurate results which may put lives at risk (false results), sorry to say this but you need to calibrate every 28 days, invest in a BP device, if you are uncertain when the recalibration will happen, shm on watch and phone usually notify you 3 days prior, alternativly, you can recalibrate whenever you feel doing so to reset the 28 days counter when you have access to the BP machine...
 

bonnyshroff

Member
Apr 7, 2017
34
7
SURAT
I did the whole process and I am getting the following errors.
Every step is done perfectly. But during last installing the SHM in watch gives error.

In f2installer I get error: more than one target found. Specify the target with -s option.
In installing from Tizen Studio I get Error Certificate [-12] Failed

I repeated the whole procedure and even restarted both PC and watch. Still same issue
 

carlitobahsoun

Senior Member
Sep 26, 2012
3,767
1,553
55
beirut lebanon
good day , new update for SHM appeared on galaxy store 1.1.1.181
 

Attachments

  • Screenshot_20220118-075855_Galaxy Store.jpg
    Screenshot_20220118-075855_Galaxy Store.jpg
    139.4 KB · Views: 34
  • Screenshot_20220118-075916_Galaxy Store.jpg
    Screenshot_20220118-075916_Galaxy Store.jpg
    656 KB · Views: 34
  • Like
Reactions: Dante63
I did the whole process and I am getting the following errors.
Every step is done perfectly. But during last installing the SHM in watch gives error.

In f2installer I get error: more than one target found. Specify the target with -s option.
In installing from Tizen Studio I get Error Certificate [-12] Failed

I repeated the whole procedure and even restarted both PC and watch. Still same issue
Do you have more than one shm mod file in the install me folder? Did you sign the shm mod?
good day , new update for SHM appeared on galaxy store 1.1.1.181
Will work on it asap, thank you for the notice
 
  • Like
Reactions: carlitobahsoun
Here is a quick summary about version 181 for phone:
  • ECG PDF files have been compressed by removing revision history on the PDF file, changed some pictures and some are compressed (but this only dropped few KBs)
  • Added CSC restriction error message
  • Added Bluetooth control settings (Haven't seen it yet, just seen the code)
  • Added ECG wrong wrist warning
  • Added ECG wrong orientation warning messages
  • ECG Download data should tell what watch was used in the measurement (I didn't see anything about BP)
  • Overall BP and ECG optimized
  • Restrictions code is heavily modified, I'll need to revise the changes and make sure what they added does not break the MOD
  • They patched few things that I just observed where errors were unhandled (method try catch exception, the exception wasn't handled, SHM would crash without showing any message or reason)
  • Separated messages of Tizen Watches from WearOS Watches (example: instead of saying top button, they said home button, lol)
Summary:
I fear that I will have a headache lol, 171 -> 181, Major changes, wish the changes didn't include restrictions, so I will either get it working or not, I'd say 40% success on first attempt...

So I will probably have a beta phase after me finishing alpha phase testing...
I already have beta testers, If I ever need more, rest assured that I would announce about it everywhere...
 

Frankyg

Senior Member
Do you have SHM installed on your watch? If yes, Original or MOD?

Try running SHM on your watch and hit open on phone perhaps
Eventually got it working. I removed and reinstalled using tizen studio. After some digging, it seems like I had 2 watch plugins installed. There was the active 2 plugin and I think more generic watch plugin also installed. I removed the generic plugin, cleared caches for the wearable app and the remaining active2 plugin.

So, ecg and BP monitor are working, which is great.
Still not working, can't customise watch faces from the phone wearable app. (V.2.2.47.21122061) the plugins are active2 plugin (v 2.2.08.21121742N) and Samsung accessory service (v 3.1.95.21123).

Any suggestions for getting this issue working?
Thank you
 
Eventually got it working. I removed and reinstalled using tizen studio. After some digging, it seems like I had 2 watch plugins installed. There was the active 2 plugin and I think more generic watch plugin also installed. I removed the generic plugin, cleared caches for the wearable app and the remaining active2 plugin.

So, ecg and BP monitor are working, which is great.
Still not working, can't customise watch faces from the phone wearable app. (V.2.2.47.21122061) the plugins are active2 plugin (v 2.2.08.21121742N) and Samsung accessory service (v 3.1.95.21123).

Any suggestions for getting this issue working?
Thank you
Galaxy wearable uses plugin to do anything, if the plugin has customization, it will work, plugins are installed automatically by galaxy wearables, uninstalling them would lead to losing features and functionality...
The watch plugin allows connectivity, that is for sure a requirement, but controlling watch is not necessarily on the same plugin, it could be on the generic which you uninstalled or something else...

The only way to know what is required is simply uninstalling everything except galaxy wearable and pair your watch, it will download and install everything required to work with your watch...
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    For those who are facing 408 connection error... a bit of searching on your own would've given you the answer in a simple form, Samsung did an oppsie, not something new...

    So take a break and check every day till it works again...

    20220619_120535.jpg
    1
    Lo siento, no entendí lo que quieres decir...
    GRAcias, su apk es un éxito 🙌
    1
    1
    Hello, in Tizen studio, I fail at the certificate part..I go past the name and password, connect to samasung acount then I got a timeout warning and cannot retrieve the certificate .. any idea ?
    Hi, can you ping the watch when it is connected to the wifi?

    I had the same problem with my watch 3, where I can't ping it.
    After doing:
    - disable bluetooth
    - wifi always on
    - enable debug mode

    I live in Finland, so the names might be bit off as I'm assuming what they would be in english.

    I had to enable "error correction".
    - settings, watch details, error correction (where you see IMEI etc.)
    Scroll all the way down, the option between "battery" and "factory reset"

    After that I can ping to watch and see it in the Tizen Studio Device Manager.
    1
    Thanks so much for this fix! I'm surprised by how mostly accurate the BP readings are when compared to digital wrist cuffs and manual sphygmomanometers. I can't wait to be a cyborg. lol
  • 173
    Hello Everyone,
    I hope you all are fine...


    Tizen-Lockup-On-Light-RGB.png


    ~~~ TIZEN WATCHES ONLY ~~~
    20220106_171450.jpg20220106_202449.png
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0049...
    • BUGS: Theming bugs...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • About ECG in SH: ECG has never synced to Samsung Cloud, since the first release of SHM, the ECG tile has no use other than being a shortcut to open SHM at ECG tab...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • IMPORTANT NOTE ABOUT POSTING: Please search the thread first before posting your problem, provide details, screenshot, videos if possible, do not just say "it's not working" or "it's crashing", details are important if you want me to help you and to get it fast...
    • FUTURE WORKS: fix theme bugs...

    • IMPORTANT NOTE ABOUT POSTING: Please read the F.A.Q and search the thread first before posting your problem, PROVIDE DETAILS, SCREENSHOT, VIDEOS IF POSSIBLE, DO NOT JUST SAY "IT'S NOT WORKING" OR "IT'S CRASHING", details are important if you want me to help you and to get it fast...

    ~~~ FOR WearOS (Watch4 And Above), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Run_me.bat Java "main" errors and JDK15.
      Open CMD and type 'Java --version', if it doesn't say Java 15, then you will struggle with such error, uninstall any JDK and reinstall JDK 15, run the command again, you should see Java 15...
    6. Connecting to the watch isn't working.
      Firewall, antivirus, defender, anything that filters the internet can block the connection of the watch, so make sure to disable all internet security, if it doesn't connect yet, reboot the pc and the watch and try again...

    ~~~ REPORTING AN ISSUE WITH SHM MOD ~~~

    Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...

    ~~~ Tizen - Active2 & Watch3 - How to install SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/6foHp4LDVd0

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:


    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ SHM MOD Companion ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/a0FO9pwqMkQ

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    InShot_20220106_203513211.jpg20220106_203225.jpg20220106_203023.jpg

    IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    Screenshot_20211216-140353_My Files.jpg
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_201440606.jpgInShot_20210411_232636295.jpgInShot_20210411_232542732.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!
    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SHM 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SHM 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install...
    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC (if no sim or location provided)

    List of Country Codes Alpha-2:
    EU_CSC (Total 35):
    "AT"
    "BE"
    "BG"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GR"
    "HR"
    "HU"
    "IE"
    "IT"
    "LT"
    "LV"
    "NL"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    "LU"
    "MT"
    "GB"
    "CH"
    "IS"
    "NO"
    "LI"
    "TR"
    "RS"
    "CY"
    EU_MNC (Total 29):
    "AT"
    "BE"
    "BG"
    "CH"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GB"
    "GR"
    "HR"
    "HU"
    "IE"
    "IS"
    "IT"
    "LT"
    "LV"
    "NL"
    "NO"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    NON-EU (Total 14):
    "KR"
    "US"
    "BR"
    "CL"
    "AE"
    "ID"
    "HK"
    "RU"
    "SG"
    "AZ"
    "GE"
    "PY"
    "AU"
    "TW"

    SHM will work only if the following is not detected on your Samsung Device:
    Paths:
    "/data/local/"
    "/data/local/bin/"
    "/data/local/xbin/"
    "/sbin/"
    "/su/bin/"
    "/system/bin/"
    "/system/bin/.ext/"
    "/system/bin/failsafe/"
    "/system/sd/xbin/"
    "/system/usr/we-need-root/"
    "/system/xbin/"
    "/system/app/Superuser.apk"
    "/cache"
    "/data"
    "/dev"
    Apps:
    "com.noshufou.android.su"
    "com.noshufou.android.su.elite"
    "eu.chainfire.supersu"
    "com.koushikdutta.superuser"
    "com.thirdparty.superuser"
    "com.yellowes.su"
    "com.devadvance.rootcloak"
    "com.devadvance.rootcloakplus"
    "de.robv.android.xposed.installer"
    "com.saurik.substrate"
    "com.zachspong.temprootremovejb"
    "com.amphoras.hidemyroot"
    "com.amphoras.hidemyrootadfree"
    "com.formyhm.hiderootPremium"
    "com.formyhm.hideroot"
    "com.koushikdutta.rommanager"
    "com.koushikdutta.rommanager.license"
    "com.dimonvideo.luckypatcher"
    "com.chelpus.lackypatch"
    "com.ramdroid.appquarantine"
    "com.ramdroid.appquarantinepro"
    Binary:
    "su"
    "busybox"
    SU:
    "/system/xbin/which"
    "su"
    Test-Keys:
    "test-keys"
    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊monthly or one time through PayPal ...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    33
    What's New:
    Changelog,
    Latest Changes:

    --- 28th May 2022 - Patched phone SHM MOD adding Theme selector and created SHM MOD Companion that would assist you in getting updates, BP sync enabler, reaching me and so...

    --- 4th May 2022 - Patched phone SHM MOD changing the icon from static to adaptive icon, bye bye ugly white frame...
    --- 23rd March 2022 - Patched SHM "Age 16 and above" bug...
    --- 22nd March 2022 - Released Tizen SHM MOD 1.1.1.191 for phone...
    --- 11th February 2022 - Patched Tizen SHM MOD 1.1.1.181, it has DarkMode (98% completed) and I fixed PDF sharing and exporting for Turkish language...
    --- 19th January 2022 - Released Tizen SHM MOD 1.1.1.181 for phone...
    --- 22nd November 2021 - Patched Tizen SHM MOD 1.1.1.171 by adding 3 languages (Turkish, Persian and Filipino), changed the design of the logo for both phone and watch, changed the naming of the phone MOD in Google Drive...
    --- 16th November 2021 - Released Tizen SHM MOD 1.1.1.171 for Phone...
    --- 14th November 2021 - Released Tizen SHM MOD 1.1.1.169 for Phone...
    --- 17th October 2021 - testing complete - introducing 4 new languages, Hindi, Punjabi, Japanese and Malay...
    --- 5th October 2021 - Edited the Fit2Installer "Run Me.bat", now it will check for the java version and will tell you from the beginning whether you have JDK15 or something else and whether you will face issues or not, so no one posts about JAVA "main" error again unless JDK is 15 and the error still exist, I wish to eliminate the repeated error of not installing or using JDK15 and also eliminate repeated posts that are about JDK15, do not post about having an error in Fit2Installer if you did not install JDK15 or have other JDKs installed...
    --- 27th September 2021 - some users reported that sync stopped in new Samsung Health, when investigated, the new update was a major update and it reset set features back to original values, it did not break the sync, do the required changes again in set features of Samsung Health and check that SHM permissions are still enabled and the sync will work again...
    --- 26th September 2021 - Added Vietnamese Language support to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...
    --- 24th September 2021 - Added Chinese Simplified Language to the phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor... New Tutorial Video Uploaded...
    --- 20th September 2021 - Google Drive updated and changed the entire structure and contents...
    --- 19th September 2021 - Patched Watch SHM 1.1.0049 wgt, removed ECG and BP standalones, I will tidy google drive and recreate the video Tutorial, make it much simpler for you guys... Updated media photos in Post#3...
    --- 15th September 2021 - Uploaded installer for Watch SHM 1.1.0049 wgt...
    --- 9th September 2021 - Patched and released Tizen SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 23rd Aug 2021 - added a Tizen logo into version 153 and changed app version label included tizen, this is just to ensure that you don't use Tizen SHM with Watch4 because it's not compatible, changed the message when no watch is connected to "To use this feature, you need Galaxy Watch Active 2 or Galaxy Watch 3 that was released in a country where this feature has been approved." and finally, on my google drive, I renamed all phone apk files to include "Phone.Tizen." at the beginning of the name, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    --- 22nd Aug 2021 - created a thread for watch4, this thread will be only for Tizen devices...
    --- 21st Aug 2021 - Watch4 mystery is revealed after long hours of dedication and with the help of different amazing members on Telegram (specifically Italy, love you all and never forget 🤌🏻 lol) and on reddit, the shm mod and watch4 is working but the process is different than the tizen watches, the mod is still being tested and still looking to improve it a bit, it works only on watch4, I will release it when I think it's perfect and has no flaws, I say in a day or two...
    --- 17th Aug 2021 - More patches applied to SHM 1.1.1.153 and 1.1.1.151... I also made an installer that would push SHM 47 to the watch... I'm still investigating the matter in regards to the watch 4 detection issues through logcat of users, if I can't fix it, I will probably be able to do more when I get the watch on 10th of September...
    --- 13th Aug 2021 - Released SHM 1.1.1.153 and patched 1.1.1.151, when no watch is connected, it will show a message instead of a black screen...
    --- 12th Aug 2021 - Fixed SHM 1.1.1.151 issue when trying to accept, you should not face any issues...
    --- 11th Aug 2021 - Released SHM 1.1.1.151, it has a bug where if running for the first time, you cannot proceed after hitting accept, so install the previous version of SHM 1.1.0.193, hit accept and finish the profile then update till I release a fix. I also removed from my Drive SHM 175 as it is deprecated, there is no use in having it anymore since you can't update from 175 to anything newer...
    --- 8th Aug 2021 - Fixed Samsung Health interference with Samsung Health Monitor, it shouldn't crash anymore and all SHM MODs have been signed with release-keys of my own, this will ensure that my work wouldn't be tampered with or Modified for whatever purposes, if you install an update of SHM MOD from other sources and it fails, that means it has been tampered with, not released by me...
    --- 7th Aug 2021 - Found out latest Samsung Health breaks SHM sometimes, workaround is uninstalling both, install SHM first, finish the profile then install Samsung Health again, DO NOT ENABLE THE SYNC INSIDE SHM DATA WITH SAMSUNG HEALTH... I will try my best to find time to investigate this and fix it... I also would like to add that "set features" was accidentally released to the public according to Samsung support, version 6.16 is the latest, I will investigate this as well to see if there is a solution, as a workaround, you can always downgrade Samsung Health, sync the BP and upgrade Samsung Health again... and finally, I did make a patreon page and I'd appreciate your support if you can, I believe that is everything in August for now...
    --- 2nd July 2021 - Patched 191 by fixing few labels for the Chinese language, and Successfully Modified and uploaded SHM1.1.0.193...
    --- 31st May 2021 - Patched 189, removed force update, and Successfully Modified and uploaded SHM1.1.0.191, changes are only Singapore Country support - I also had to go back to previous versions, I forgot to change the error of age from 22 to 16 for all languages as I only changed English (Versions affected 183, 189 & 191), I removed Samsung Health 6.17*, please use 6.16.0.047, if you updated and can't see set features, uninstall updates and grab a copy from my drive...
    --- 29th May 2021 - Organized Google drive and added Samsung Health 6.17.0.019 that has set features which enables sync with SHM...
    --- 14th May 2021 - Some members on XDA, reddit and youtube have struggled with finding JDK 15 since the URL keeps breaking, I decided to locate and download JDK 15 and upload it to my Google Drive, now you have two options, the link and google drive...
    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...
    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    19
    SHM MOD Phone Media:
    Screenshot_20210919-153730_One UI Home.jpg20210919_153850.jpg20210919_153839.jpg20210919_153828.jpg
    SHM MOD Watch Media:
    Screen_20210919_134630.pngScreen_20210919_134641.png
    Ways to differentiate between MOD and original, and in galaxy wearable app:
    Screenshot_20210919-134811_Galaxy Watch3 PlugIn.jpg
    13
    Update update update, a wonderful amazing update for all watch4 owners and those who ordered it
    SHM works on watch4,
    Still going through heavy tests to ensure it is at its best form and most features active...
    I will release it in 1-2 days...
    8
    I am going to start organizing the Thread for Watch4 *Excitement* lol