• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.1.157 - Root, Age, Country & Device Restriction Removed - 17th October 2021

How happy are you with the outcome?


  • Total voters
    326
Search This thread
Yup like seriously abnormal...you have to touch the button just so it works. Annoying.

Attached example.

20210917_204130.jpg
 

exesa

Member
Sep 17, 2021
7
3
I have strange problem. Can't go through profile creation on SHM(moded) on phone.
Huawei p10 lite and GW 4 lte.
1.Moded phone apk instaled on phone-no probs.
2.Moded watch apk instaled through phone(Bugjaer)-no probs.
-on watch I open icon with "M", then open EKG and when scroll down only option is "open SHM on phone"
-on phone SHM(moded) ask for create profile and keep spin blue cyrcle, then stops. Nothing. Cant open next window.
If i disconnect phone from Galaxy Wearable, SHM(moded) alow me to create profile and pass through. Then i connect phone and its wisible in both SHM and Wearable.
I read screen with tutorial how measure EKG, where is watch on left or right hand and when all is done message say "open app on watch". Open it on watch -and we go to point one SHM start with "create profile" and not go
further.
Like SHM on watch and phone not see each other.
Sorry for big post.
 
Yup like seriously abnormal...you have to touch the button just so it works. Annoying.

Attached example.

View attachment 5412447
Looks like the trio (dust or dirt or oil) trapped and interfering with the readings, turn off the watch, wash it under warm water, gently push the top button (that's ecg probe) after that dry it with tissue and leave it to dry even more on its own, once you feel it's dry, power it on and take another measurement and you'll see things seem normal, the probe is very sensitive...
I have strange problem. Can't go through profile creation on SHM(moded) on phone.
Huawei p10 lite and GW 4 lte.
1.Moded phone apk instaled on phone-no probs.
2.Moded watch apk instaled through phone(Bugjaer)-no probs.
-on watch I open icon with "M", then open EKG and when scroll down only option is "open SHM on phone"
-on phone SHM(moded) ask for create profile and keep spin blue cyrcle, then stops. Nothing. Cant open next window.
If i disconnect phone from Galaxy Wearable, SHM(moded) alow me to create profile and pass through. Then i connect phone and its wisible in both SHM and Wearable.
I read screen with tutorial how measure EKG, where is watch on left or right hand and when all is done message say "open app on watch". Open it on watch -and we go to point one SHM start with "create profile" and not go
further.
Like SHM on watch and phone not see each other.
Sorry for big post.
Could you provide a video of what you mean because I didn't understand well what you're trying to say, sorry
Awesome Work @Dante63 much appreciated :cool:

Just missing the SPo2 widget and App but I think that's an Africa region issue.
Still investigating the apps but when I get my watch4, I'll have a better understanding of what needs to be done...
 
Hi, I'm a watch 4 classic user in Taiwan, we can use SpO2, but cannot use body composition. SpO2 and BIA is samsung health's feature so maybe there's some connection between hack these two. I can provide the apk pull from watch, but that apk cannot even install back to my watch(even remove the old one). I think these country only modded the installed samsung health app without the whole system, so the orginal apk in watch cannot be installed(the way I pull is find the apk path, maybe is not the right way). In these case, maybe pull out the apk is useless(which is original ver.).
Did someone test about pull out apk and install it? If it works in countries that don't limit these two feature, then what I guess is right.
Thanks all
 
Last edited:

Siebrand

Member
Hi, I'm a watch 4 classic user in Taiwan, we can use SpO2, but cannot use body composition. SpO2 and BIA is samsung health's feature so maybe there's some connection between hack these two. I can provide the apk pull from watch, but that apk cannot even install back to my watch(even remove the old one). I think these country only modded the installed samsung health app without the whole system, so the orginal apk in watch cannot be installed(the way I pull is find the apk path, maybe is not the right way). In these case, maybe pull out the apk is useless(which is original ver.).
Did someone test about pull out apk and install it? If it works in countries that don't limit these two feature, then what I guess is right.
Thanks all
You tried this with ADB?
 

tamock

New member
Sep 18, 2021
3
2
Dear @Dante63, thank you very much for your work. Really happy if I would use the BP and ECG on my Watch4 and my phone (Samsung Note 10+ non-rooted).

Following your instructions, I have installed SHM on my watch as well as on my phone. Now I cannot get them to work. The SHM app won’t pair with the watch. From my watch when I click “open the phone app”, the phone SHM app opens but it says “cannot connect with your watch”. On my phone if I open SHM app, it shows “no compatible watch found”.

Besides, SS Wearable or SS Health work properly with my watch. Maybe the SHM Mod still not supported for my country yet? I am from Vietnam. Could you please help me out? Thank you.

b1.jpg
b2.jpg
b3.jpg
 
yes, when install apk , it failed with error code 3001, reject by buildtype
That's what I was thinking, each region has a different app version and you can't sideload from a different watch,but hopefully when I have my watch, I will be able to do more investigation and fix it
Video for my problem-cannot create profile in SHM(mod version).
https://streamable.com/eog027
Maybe because its Huawei phone and first pair is done through Samsung Health -accessories.
That's a very odd behavior 🤔...
Could you consider removing the original SHM from your watch?
I have some doubts that both SHMs are working...
Dear @Dante63, thank you very much for your work. Really happy if I would use the BP and ECG on my Watch4 and my phone (Samsung Note 10+ non-rooted).

Following your instructions, I have installed SHM on my watch as well as on my phone. Now I cannot get them to work. The SHM app won’t pair with the watch. From my watch when I click “open the phone app”, the phone SHM app opens but it says “cannot connect with your watch”. On my phone if I open SHM app, it shows “no compatible watch found”.

Besides, SS Wearable or SS Health work properly with my watch. Maybe the SHM Mod still not supported for my country yet? I am from Vietnam. Could you please help me out? Thank you.
By any chance, do you you have the Original SHM installed too?
 

tamock

New member
Sep 18, 2021
3
2
By any chance, do you you have the Original SHM installed too?
Thank you for your response. I've installed the Mod SHM versions from your drive (icon with W letter in phone, icon with M in watch), and never download the original one yet.

It seems that my watch can call out phone SHM app. But the phone SHM cannot pair with watch for some reasons. The watch still works normally with SH and S. Wearable though.

I have re-installed those apps several times. Any idea?
 
Thank you for your response. I've installed the Mod SHM versions from your drive (icon with W letter in phone, icon with M in watch), and never download the original one yet.

It seems that my watch can call out phone SHM app. But the phone SHM cannot pair with watch for some reasons. The watch still works normally with SH and S. Wearable though.

I have re-installed those apps several times. Any idea?
Do you face Bluetooth problems with other things or only with SHM MOD? Perhaps, resetting the watch would work 🤔, the MOD is independent from everything, so it should work and they both should be able to see and interact with each other...

Try resetting the watch, test the Bluetooth connectivity and stability, then install the MOD, if it's still behaves abnormally, pass me a logcat and I'll read it and see what is interfering or happening...

I'd appreciate if you could even provide me a recorded video or the behavior so I could try to recreate the scenario or at least know what exactly to look for in the logs...
 
  • Like
Reactions: tamock

mrafigf

Member
Jan 20, 2017
16
10
Dear @Dante63. Thank you for the SHM MOD. I'm an Indonesian Galaxy Watch wearer paired with a Samsung Galaxy S6. The application runs normally either on the phone or on the watch. But there is something strange when calibrating. My calibration numbers, using an Omron blood pressure meter, are in the range of 115 to 118 for systolic and 77 to 80 for diastolic. Of course each calibration numbers are entered into the phone according to the calibration instructions. After completion of calibration (five times or more calibration process), then I try to take measurements using the watch. The results are much different from the calibration results. Numbers measured from the watch ranged from 121 to 127 systolic and 85 to 91 diastolic. The clock measurement results do not seem to reflect the results of the calibration. From five times of calibration, the results of calibration using the tension meter are always below the number 120/80. But the measurement results from the Galaxy Watch are always above 120/80 to 127/90.
Does this SHM MOD affect the calibration results. Or maybe the calibration results are not stored on the Galaxy Watch so the difference in numbers is too big between the tension meter measurement (Omron) and the Galaxy Watch measurement results?. Please pay attention to this SHM MOD calibration. Thank you. Sorry for my inaccurate language because English is not our native language.
 
  • Like
Reactions: Dante63

Josefumacau

New member
Sep 18, 2021
1
1
Great and thanks Dante63, my new samsung watch 4 works with Blood pressure monitor now because I am in the ****ing CHINA then cannot use the original SHM. Anyways, thanks again
 
  • Like
Reactions: Dante63

Glenmjd

Member
Aug 15, 2021
16
12
Hi Dante, get your watch yet? Quick question , do areas that have BP and ECG without any mod have sync to SH? Or is it a problem with moded only?
Thanks for all the great work!👍
 
Dear @Dante63. Thank you for the SHM MOD. I'm an Indonesian Galaxy Watch wearer paired with a Samsung Galaxy S6. The application runs normally either on the phone or on the watch. But there is something strange when calibrating. My calibration numbers, using an Omron blood pressure meter, are in the range of 115 to 118 for systolic and 77 to 80 for diastolic. Of course each calibration numbers are entered into the phone according to the calibration instructions. After completion of calibration (five times or more calibration process), then I try to take measurements using the watch. The results are much different from the calibration results. Numbers measured from the watch ranged from 121 to 127 systolic and 85 to 91 diastolic. The clock measurement results do not seem to reflect the results of the calibration. From five times of calibration, the results of calibration using the tension meter are always below the number 120/80. But the measurement results from the Galaxy Watch are always above 120/80 to 127/90.
Does this SHM MOD affect the calibration results. Or maybe the calibration results are not stored on the Galaxy Watch so the difference in numbers is too big between the tension meter measurement (Omron) and the Galaxy Watch measurement results?. Please pay attention to this SHM MOD calibration. Thank you. Sorry for my inaccurate language because English is not our native language.
The MOD has nothing to do with calibration, and it's normal to have BP readings inaccurate, I keep telling everyone to use the BP cuff side by side with the watch till readings adjust and become somewhat more accurate...
Hi Dante, get your watch yet? Quick question , do areas that have BP and ECG without any mod have sync to SH? Or is it a problem with moded only?
Thanks for all the great work!👍
Still not yet and no, the mod itself has no sync to SH...
 

tamock

New member
Sep 18, 2021
3
2
Do you face Bluetooth problems with other things or only with SHM MOD? Perhaps, resetting the watch would work 🤔, the MOD is independent from everything, so it should work and they both should be able to see and interact with each other...

Try resetting the watch, test the Bluetooth connectivity and stability, then install the MOD, if it's still behaves abnormally, pass me a logcat and I'll read it and see what is interfering or happening...

I'd appreciate if you could even provide me a recorded video or the behavior so I could try to recreate the scenario or at least know what exactly to look for in the logs...
Hi @Dante63, it worked now, but I don’t know why.

Yesterday I tried re-installing and running the apps many times with no hope. Finally, my watch was out of battery. After full charging I turned off the Bluetooth and Wifi in both my watch and my phone, then went to sleep. At the morning I turned on the bluetooth without testing the apps again. Now I’ve just touched the SHM in my watch, it called out the SHM in my phone. With my surprise, they worked like a charm. The phone SHM now has paired with my watch. I just calibrated the BP measuring, and the ECG feature worked well too.

Many thanks for your great contribution!
 
  • Like
Reactions: galaxys and Dante63
Hi @Dante63, it worked now, but I don’t know why.

Yesterday I tried re-installing and running the apps many times with no hope. Finally, my watch was out of battery. After full charging I turned off the Bluetooth and Wifi in both my watch and my phone, then went to sleep. At the morning I turned on the bluetooth without testing the apps again. Now I’ve just touched the SHM in my watch, it called out the SHM in my phone. With my surprise, they worked like a charm. The phone SHM now has paired with my watch. I just calibrated the BP measuring, and the ECG feature worked well too.

Many thanks for your great contribution!
In the future, I will definitely recommend people to reboot the watch, seems like Bluetooth was busy doing something on the watch and kept disconnecting 🤔...

Anyway, glad it worked
 
  • Like
Reactions: tamock

exesa

Member
Sep 17, 2021
7
3
Still no luck here. I removed original SHM via adb command. Same thing. Cannot create profile in SHM. Thanks for your help, but seems Huawei and Samsung are worst combo.
 
Still no luck here. I removed original SHM via adb command. Same thing. Cannot create profile in SHM. Thanks for your help, but seems Huawei and Samsung are worst combo.
Your fight is with google lol, the lack of Google services (since many apps contain google services) holds you back, if I can have logs, I may be able to kill Google Services from SHM and allow you to pass through after profile edit... logcat reader from playstore is good enough, make sure after installing it to follow the adb request for non-root or give it root access so it can generate logs, after that, start recording the log, open SHM and create the profile, once it reaches to the stuck on loading screen after profile completion, stop the logcat and send me the txt file here
 

Top Liked Posts

  • 1
    Try "CheckFirm" from Google play, that's how you know if there is an update or what you have is the latest...
    Thank you for answer Dante. Nothing new. Weird.
  • 11
    A message for everyone:
    I appreciate all of you trying to help when you find a problem,
    but please allow me to investigate first before you suggest your own solution,
    If you suggest a solution that is not necessary,
    some members will follow that solution and later they will ask if there is a fix instead of a solution for what they thought is a problem,
    And I will end up telling every one of them that the proposed solution is not required for those that applied that solution,
    could be few people and could be a lot, but I wish to have none...

    Everyone should be happy with no problems, that is my goal, and you can see, I do updates without delays...

    If you have a suggestion or a solution for a problem, you can DM me first, I respond to DMs as soon as I can...
    If you wish to support me, you can do so through PayPal or Patreon...
    Bless you all, wish you all a great day...
    10
    Thanks to XDA @Zacharee1 for having time to decompile Samsung Health and find the way to enable set features in such there will be no need for Samsung Health 6.16, we will be able to use the latest version of Samsung Health always...

    Updating the thread in a bit with the method...
    6
    Thread updated, check the BP sync section
    5
    I know I've said this before, but I'm going to say it again - thank God (Dante63 🤣😉) we don't have to wait on Samsung to implement these features. I was willing to give them the benefit of the doubt here in Canada - that maybe the approval process was onerous and time-consuming - but no, I just read that Apple got its ECG and irregular heart rhythm notification feature approved two years ago - so the problem clearly lies with Samsung. Which is not surprising when you consider all the other ways they treat our market as an afterthought (no accessories on the website, pathetic trade-in program, etc.).
    Thank you, I'm flattered :giggle:...
    I will always continue maintaining SHM and will do my best to make things easier and better...

    As for what companies do, honestly, I don't know why things are like this but regardless, XDA community exist with many great devs that will always make things better and life easier ;)
    5
    I confirm for you that there is no ECG tile inside Samsung health, no need to report any further, Samsung Health is looking for the original package name, hard-coded...

    I may be able to find a solution for that but the tile has no job but to open SHM for you...

    So if I can't figure a way to trick Samsung Health, don't be disappointed, at least BP sync is working...
  • 163
    Hello Everyone,
    I hope you all are fine...
    Google_WearOS.png

    ~~~ WearOS WATCHES ONLY ~~~
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM 1.1.0.175 MOD is the latest...
    • BUGS: Non that I could find...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • IMPORTANT NOTE ABOUT POSTING: Please search the thread first before posting your problem, provide details, screenshot, videos if possible, do not just say "it's not working" or "it's crashing", details are important if you want me to help you and to get it fast...
    • FUTURE WORKS: nothing yet on my mind, need to get my watch4 first...

    ~~~ FOR Tizen (Active2 And Watch3), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Do I need to install both phone and watch MODs?
      Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...
    6. Where is the IP Address?
      You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...
    7. Can I do this from my phone?
      Yes, you can use Bujeager if you don't like to type commands or Remote ADB Shell if you want to type the commands...
    8. How do I update?
      Just install it again and it will update, whether you install the phone app or the watch app...

    ~~~ Huawei connection issue pairing issues with Watch4 on Galaxy Wearables ~~~

    This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance


    You need Galaxy Wearables & Watch4 Plugin installed, now do the following steps:
    1. Download Samsung Health.
    2. start Samsung health then go to accessories and search for your watch (scan).
    3. Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
    Edit: Do not shut down the watch. After that, you can't connect to the smartphone!!!
    The watch is after that in a constantly reboot.

    Edit 2: After a reset (watch) it works.
    Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
    It was Explained that you need to have the following apps installed:

    Galaxy Wearable & Watch 4 plug-in

    Give all permissions to Galaxy Wearables and the Watch4 plugin by going app info, scroll down, permission and grant all...

    Now Clear the data of the following applications:

    • Google Play Services
    • Google Play Framework
    • Google Play Store
    • HwWifiproBqeService
    The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4 again through Samsung Health and it should work, after that you can do whatever you want for google...
    ~~~ HOW SHM MOD LOOKS WHEN RUNNING FOR THE FIRST TIME ~~~
    If you can't see the YouTube video, visit the YouTube link: (creating a video)

    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...

    ~~~ WearOS - SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/-SgXawPy_cM

    ~~~ Using an APK Instructions ~~~
    Member @boostermbkking from Telegram group suggested using Bugjaeger Mobile ADB - Develop & Debug via USB OTG
    to push the Watch4 SHM MOD from the phone to the watch...

    You will need to do Step 3 from the ADB Text Instructions which is Enabling ADB on the Watch...


    If you prefer using the PC, follow the next ADB Text Instructions...
    ~~~ ADB Text Instructions ~~~
    Although I have put instructions in my Google Drive with different languages, I will post the English here Again, if you face any issues, Tell me where you got stuck and I will guide you through it, the steps are fair and very easy to follow...

    ****************************************************************
    ***** XDA-Dante63 : Instructions for Watch4 SMH MOD *****
    ****************************************************************

    These are simple instructions to make Watch4 SHM work with the SHM MOD,
    there will be a video Tutorial when I get the Watch, I will look for a method to
    do this on the phone as well instaed of PC...


    ****************************************************************
    ******* STEP ONE: Downloading and Installing ADB *******
    ****************************************************************

    Note: Skip this step if you have ADB already!

    Let's start by installing ADB by simply downloading and extracting "Minimal_ADB_Fastboot_v1.4.3.zip" from my Drive,
    and installing it on the C Drive as "C:\adb", make the path short. now Copy the SHM-Watch4.APK into the ADB folder...


    ****************************************************************
    ******* STEP TWO: Preparing ADB Environment ********
    ****************************************************************

    You can use either CMD or PowerShell...

    1. Hold down the "window logo + R" to bring up the run window and type "cmd" or "PowerShell" depending on what you like and hit enter...
    2. On the Terminal, type "cd C:\adb"...

    Or you can go to where adb is installed, hold down SHIFT and right click on empty space,
    hit "Open XXXX Window here" where XXXX is PowerShell or Command Prompt depending on your Settings...

    PC is ready...


    ****************************************************************
    ** STEP THREE: Preparing Watch4 for ADB Connection **
    ****************************************************************

    1. Disconnect the Bluetooth (optional) and connect the watch to the same network of your PC/Laptop...
    2. Go to config -> about -> tap the software version until it says "Developer mode turned on"...
    3. Go back to the config menu and you should see developer options above the about, tap it...
    4. Enable ADB and ADB Wi-Fi, write down the IP that you see under ADB Wi-Fi...
    (if you do not see it, go back to connections then Wi-Fi and then the wi-fi you are connected to,
    there should be an IP below it, if not, go back to developer options and check ADB Wi-Fi)...

    Watch is Ready...


    ****************************************************************
    ** STEP FOUR: Replacing Original SHM with MOD SHM **
    ****************************************************************

    I will write the commands as CMD,
    if you are using PowerShell, add ".\" before every command,
    for example ".\adb kill-server", ".\adb start-server", etc...

    1. start the ADB Server by killing it first to be safe no adb instance is running:
    adb kill-server
    then type:
    adb start-server

    Results:
    * daemon not running; starting now at tcp : port
    * daemon started successfully

    2. Connect to the watch, replace IP with the number you got from the Watch4, type:
    adb connect <IP>

    On your watch, allow the connection from the computer...
    Results:
    connected to IP : PORT

    3. OPTIONAL STEP: if you have original SHM and want to uninstall it, do the following:
    adb shell
    then type
    pm uninstall -k --user 0 com.samsung.android.shealthmonitor
    finally type:
    exit

    4. Install MOD SHM, type (Replace the X with the version or simply make sure you put the name of the apk you are installing to the watch if you will rename the apk):
    adb -s <IP> install Watch4.SHM.MOD.X.X.X.XXX.apk

    Results:
    Performing Streamed Install
    Success

    5. Disconnect from ADB:
    adb disconnect

    Results:
    disconnected everything

    IMPORTANT NOTE: Disable the ADB on your watch when you are done,
    otherwise it will drain the battery,
    I might say it will drink the battery like a juice...


    ****************************************************************
    ** Congratulations, you have installed Watch4 SHM MOD **
    ****************************************************************
    Just a second friendly reminder 😊 , *inhales deeply*:

    !!!DON'T FORGET TO TURN OFF ADB ON THE WATCH, IT WILL DRAIN YOUR BATTERY!!!

    *ehm* enjoy the SHM MOD now 😆...

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - WearOS - SHM No Root, Country, Device, Update, Age Detection + Watch4 SHM MOD

    I believe the folders describe themselves, the APK at the root is to be installed on your phone, the file at the root of folder "ADB Watch4" is to be installed on the Watch4, you have instructions for ADB in different Languages and you have the Original SHM for the watch4 and there will be a history of the Watch4 SHM MOD...

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_232542732.jpgInShot_20210411_232636295.jpgInShot_20210411_201440606.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!

    ~~~ Special Thanks ~~~

    Thanks to the amazing people on my Telegram group and Reddit users that reached me, thanks to everyone that tested the MOD and making it happen before I got my watch...

    Thanks to @pavanmaverick he found out about the Tizen sync working for WearOS...
    Big Thanks to XDA @Zacharee1 for decompiling and diving into Samsung Health code to find a way to enable set features on any Samsung Health version, no more downgrading...


    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊 monthly or one time through PayPal ...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    39
    Changelog,
    Latest Changes:

    --- 17th October 2021 - testing complete - introducing 4 new languages, Hindi, Punjabi, Japanese and Malay...

    --- 12th October 2021 - I have done some changes in my drive, now there are 2 READ ME folders for ADB commands "READ ME - ADB Auto instructions" (this is new) & "READ ME - ADB Manual instructions" (this is the old READ ME), the idea is to have a bat file that will do all adb commands, so no need to install or type anything, all you need to do is run the bat file and select what you want to do...
    --- 27th September 2021 - some users reported that sync stopped in new Samsung Health, when investigated, the new update was a major update and it reset set features back to original values, it did not break the sync, do the required changes again in set features of Samsung Health and check that SHM permissions are still enabled and the sync will work again...
    --- 26th September 2021 - Added Vietnamese Language support to the phone and watch4 SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...
    --- 24th September 2021 - Added Chinese Simplified Language to the watch and phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor...
    --- 20th September 2021 - Thanks to XDA @pavanmaverick for his great finding that the method used in Tizen thread for BP sync between Samsung Health and Samsung Health Monitor actually works for WearOS, I have added that section on this thread with slight modification and extra steps... Big Thanks to @Zacharee1 for going a step further and finding how to enable set features...
    --- 13th September 2021 - Patched and fixed the share PDF problem in the Phone SHM MOD 1.1.1.157, you should be able to share and export reports with no problems, have a great day 😁...
    --- 9th September 2021 - Patched and released WearOS SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet... I have also patched and released the watch4 SHM MOD 1.1.0.175, update shows heavy code optimization and support for AU as well, i also did a patch for low battery, now you can use SHM even if you have low battery...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 31st August 2021 - updated instructions for Huawei Devices connectivity issues again and removed the Galaxy Wearable MOD, Some users followed the Reddit instructions and faced disconnect issue, I read the logs and added the solution for the disconnect problem...
    --- 29th August 2021 - updated instructions for creating Galaxy Wearables MOD for Huawei devices according to the Reddit instructions and uploaded a modded galaxy wearables apk with test-keys so you guys can update it till Samsung or Huawei fix this problem...
    --- 28th August 2021 - updated instructions, turned out that the Patch I applied on the Watch4 SHM MOD made it independent, no need for the Original SHM to be installed anymore...
    --- 27th August 2021 - patched the watch4 shm update 171 and released it, simply adb install it and it will update the mod, you don't need to update the original SHM...
    --- 26th Aug 2021 - Patched the watch4 SHM MOD, I never thought it would have restrictions, oh well, patch include (country restrictions removed, BP disable removed, force update removed and Age changed from 22 to 16), simply install and it will update, no need to uninstall the previous MOD... Oh and Canada does not have SHM on the watch, probably some countries won't have it too, I updated the thread to include a section for "Missing Original SHM" and I updated the ADB instructions and I removed port since ADB connects to defalt by itself, you just need the IP of the watch...
    --- 25th Aug 2021 - Another patch I have done on 153, since the link between Samsung Health and SHM is broken, I decided to remove the pop-up dialog that asks to sync, it's confusing some people... Also, after some tests done by a telegram member, it is possible to disable and hide the Original SHM on the Watch by doing Connection the watch to ADB and going into adb shell and typing pm disable-user --user 0 com.samsung.android.shealthmonitor and exiting the shell and disconnecting... instructions updated...
    --- 23rd Aug 2021 - patched SHM 153, added a WearOS logo to the phone app and changed app version label included wearos, this is just to ensure that you don't use WearOS SHM with Watch3 or Active2 because it's not compatible, patched Watch4 MOD 169 to have a ring on the widget to make it more friendly to the eye (there is a bug in galaxy wearable if you add tiles, you will see the widgets not displaying correctly, so set it from the watch if you can't tell which is the original and which is the MOD and organize it on the phone later if you want), I also patched SHM 153 for Watch4 in way that it can work with SHM 153 for Tizen, users that have both watches connected to the same phone can enjoy using both SHMs and finally, on my google drive, I decided to add "Phone.WearOS." at the beginning of every phone application, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    I added a section of watch4 pairing with Huawei issues and possible fix, it's done by reddit user, with small collab with me..
    --- 22nd August 2021 - Initial release of SHM MOD for Watch4...
    19

    These are photos from the Telegram group that members have done the tests:​

    photo1629555957.jpgphoto1629572970.jpegphoto1629567761.jpegphoto1629567694 (1).jpegphoto1629567694.jpegefd011ac-6066-4fc1-af5d-6089286ae496.jpgIMG_20210821_174554-min.jpgIMG_20210821_174703-min.jpg

    The SHM MOD on the Watch4 will have M on the logo to distinguish it from the Original SHM...​

    Here is a short Video:

    The SHM MOD Widgets on the watch will Have a Ring to make it very friendly to the eye:​

    photo1629648527.jpeg
    11
    A message for everyone:
    I appreciate all of you trying to help when you find a problem,
    but please allow me to investigate first before you suggest your own solution,
    If you suggest a solution that is not necessary,
    some members will follow that solution and later they will ask if there is a fix instead of a solution for what they thought is a problem,
    And I will end up telling every one of them that the proposed solution is not required for those that applied that solution,
    could be few people and could be a lot, but I wish to have none...

    Everyone should be happy with no problems, that is my goal, and you can see, I do updates without delays...

    If you have a suggestion or a solution for a problem, you can DM me first, I respond to DMs as soon as I can...
    If you wish to support me, you can do so through PayPal or Patreon...
    Bless you all, wish you all a great day...
    10
    ok everyone, it's update time for SHM MOD:
    • Watch4 (1.1.0.175), here are my observations:
      1. AU support...
      2. heavy code optimizations...
    • Mobile app, 1.1.1.157:
      1. Support for Country Code AU (Australia) ECG & BP...
      2. Some optimizations to the code in BP & ECG...
      3. Some optimization done on some BP cuff which I think we still don't have access to, maybe there are test users...?
        how-to-wear-and-start-aps-video-720.gif
    Stay tuned, releasing soon after I complete my patches tests to be sure it's stable with no issues...

    PS. I did notice a restriction that I removed from the phone and I applied it to the watch as well, which is basically low battery, prevents you from using the SHM on the watch4...