hello i'm planning to buy samsung's galaxy watch 4 but i have a rooted s21 can i pair the two? is so how?
I did a factory reset, I cleaned the watch again although it was already clean, The battery was 85%. I tried to calibrate blood messure with no luck...same issues (weak signal). Charged a few minutes, battery went above 90%, tried again everythning fine...I did many messurements (all succesfull) until battery dropped below 90% and.... problem started again.....Sorry I was driving so I didn't tell you the solution for dirty probe, simply wash the watch with water and gently press the probe (top button) several time to allow the water clean everything beneath it, could be anything, this is a very known problem for a long time in active2 and watch3, present in watch4 as well, dry the watch afterwards with tissue and leave it for some time to dry on its own...
You're welcome to try factory reset though to solve the below 90% problem issue
I have galaxy note 20 ultra rooted and connected to my watch3 (don't have my watch4 yet but it's just a pair and done)...hello i'm planning to buy samsung's galaxy watch 4 but i have a rooted s21 can i pair the two? is so how?
Take it back to Samsung, show them the problem, it seems like hardware issue...I did a factory reset, I cleaned the watch again although it was already clean, The battery was 85%. I tried to calibrate blood messure with no luck...same issues (weak signal). Charged a few minutes, battery went above 90%, tried again everythning fine...I did many messurements (all succesfull) until battery dropped below 90% and.... problem started again.....
Anyways, I really appreciate you help![]()
I have galaxy note 20 ultra rooted and connected to my watch3 (don't have my watch4 yet but it's just a pair and done)...
I have galaxy note 20 ultra rooted and connected to my watch3 (don't have my watch4 yet but it's just a pair and done)...
Take it back to Samsung, show them the problem, it seems like hardware issue...
Well yes, magisk hide all watch plugins and galaxy wearable app and install magiskhide props and Universal SafetyNet Fix (bypass SafetyNet net) and it will work...Did you do anything in particular to make it work(magisk hide, a magisk moduli, ecc.)?
Did you install the mod on your phone because mod needs to work with mod, if you did install it, in order for the phone to recognize the watch, open the mod on phone and on watch and they'll link to each other and work normallyHi when I try to run blood pressure I get "No compatible watch found" I have a Huawei P30.
EKG is working fine. I have installed the Version "Watch4.SHM.MOD.1.1.0.175.apk". Is there a newer Version to install? The download link still shows this version to download.
It's not because you're stupid, or new, that you can't find the link - however, it is because you're new that you're posting asking for information that can already be found in the thread (and in the OP no less!). One of the first rules of these forums is to search them carefully first for the information you need before posting - and not to clutter the thread by posting to ask for information that is already in the thread.Sorry i might be stupid to ask this :') But can you replay with the download link of the MOD beacuse i can't find it anywhere Because i am new here .
Thanks You .
Hello! I've installed the Nova-Launcher and made it to the default but it doesn't work for meJust updating you, No one was able to find the update you speak of, regions Asia and Europe...
Please share the link and a screenshot of what you are seeing...
According to the logs, package "com.oppo.launcher" which is your main launcher is failing to call the app, try using different home launcher, 3rd party ones, see if that works
It's on the max font-size, I don't know how else to make a huge link more obviousSorry i might be stupid to ask this :') But can you replay with the download link of the MOD beacuse i can't find it anywhere Because i am new here .
Thanks You .
I'll have a look and let you know about itHello! I've installed the Nova-Launcher and made it to the default but it doesn't work for meThe logfile is attached.
Just updating you, No one was able to find the update you speak of, regions Asia and Europe...
Please share the link and a screenshot of what you are seeing...
According to the logs, package "com.oppo.launcher" which is your main launcher is failing to call the app, try using different home launcher, 3rd party ones, see if that works
Try "CheckFirm" from Google play, that's how you know if there is an update or what you have is the latest...Hi guys, please someone confirm my q. i have Watch 4 Classic LTE 46mm Europe official distr - SM-R895F with FW R895FXXU1AUGC from first unbox and still havent new update. other model W4 recieved lot of updates. is this last fw or? thanks
Thank you for answer Dante. Nothing new. Weird.Try "CheckFirm" from Google play, that's how you know if there is an update or what you have is the latest...
Ok, Try looking for system app and disable it:Hello! I've installed the Nova-Launcher and made it to the default but it doesn't work for meThe logfile is attached.
https://www.xda-developers.com/gala...ces-gesture-controls-enhanced-fall-detection/Try "CheckFirm" from Google play, that's how you know if there is an update or what you have is the latest...
Still no watchhttps://www.xda-developers.com/gala...ces-gesture-controls-enhanced-fall-detection/
Another update.. You still dont have watch?
Hey Dante63;
A question I had for a while ...
For Installations on the Watch Directly from PC,
Is there a way to connect the Watch directly to the PC / Laptop over WiFi - Instead of connecting it to a router ?
Well, let me address your comment first:Good day guys, i have Samsung A7 2018 and got my Samsung galaxy watch 4, downloaded Samsung health monitor 1.1.1.191 from another source, and then the bugjaeger and did every step and connected my watch and downloaded the WATCH SHM MOD 1.1.0.175
all of this I need to check my blood pressure and ECG since i have a high blood pressure issue,
BUT whenever I open the Samsung health monitor on my phone the following message appears: service not available (Samsung health monitor is not available on this phone. it's only available on Samsung Galaxy phones released in countries where Samsung Health monitor has been approved)
Please if there is a solution for this I would be grateful
First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...
Ok, now let's begin:
- Tizen SHM MOD and WearOS SHM MOD...?
The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...- Do I need root...?
No root is required...- Does this void my warranty?
No it does not void the warrenty or trip the know or damage the watch or the phone...- OTA effect on MOD & MOD effects on OTA.
No Effects, the MOD is independant...- Do I need to install both phone and watch MODs?
Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...- Where is the IP Address?
You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...- Can I do this from my phone?
Yes, you can use Bugjeager if you don't like to type commands or Remote ADB Shell if you want to type the commands...- How do I update?
Just install it again and it will update, whether you install the phone app or the watch app...- Do I need Samsung Health MOD, is there even such thing...?
There is no Samsung Health MOD, Samsung Health is a core application, modding it will break many services, using official Samsung Health works fine...
Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
Initially it was Huawei devices but this solution works for other devices as well...
This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance
You need Galaxy Wearables & Watch4 Plugin installed, now do the following steps:
- Download Samsung Health.
- start Samsung health then go to accessories and search for your watch (scan).
- Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
It was Explained that you need to have the following apps installed:
Galaxy Wearable & Watch 4 plug-in
Give all permissions to Galaxy Wearables and the Watch4 plugin by going app info, scroll down, permission and grant all...
Now Clear the data of the following applications:
The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4 again through Samsung Health and it should work, after that you can do whatever you want for google...
- Google Play Services
- Google Play Framework
- Google Play Store
- HwWifiproBqeService (For Huawei devices only, skip if you are not Huawei)
One last note, disable any battery optimization, some phones have aggressive optimization, they will kill background services, this will stop the watch4 from pairing, if you can't disable it, then whitelist galaxy wearble and the watch4 plugin!
pm disable-user --user 0 com.samsung.android.shealthmonitor
and exiting the shell and disconnecting... instructions updated...