Development [RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.1.209 - Root, Age, Country & Device Restriction Removed - 18th Sept 2022

How happy are you with the outcome?


  • Total voters
    829
Search This thread
Hey, thanks so much for this! I got the BP working with your mods, but I'm having trouble enabling the sync. Even after downloading and extracting your zip and enabling the required features in Set Features, the modded SHM won't let me turn on data permissions for SH. Any idea what's going on?

Oh also, extra info: My phone is a Galaxy Z Fold 3.
Enabling features in set features as in Enabling dev and developer mode in Samsung Health, force stopping, clearing cache and starting Samsung Health again before opening SHM, yes?

Edit: I see you fixed it by force closing
 

Glenmjd

Member
Aug 15, 2021
16
12
Hey, thanks so much for this! I got the BP working with your mods, but I'm having trouble enabling the sync. Even after downloading and extracting your zip and enabling the required features in Set Features, the modded SHM won't let me turn on data permissions for SH. Any idea what's going on?

Oh also, extra info: My phone is a Galaxy Z Fold 3.
After enabling set features make sure you force stop and clear cache.
 
  • Like
Reactions: Dante63
Yeah I know that. But this happening like 10-20 sec after ju have use the BP or ECG. When I'm done i go back to my start screen, the watch face. The watch goes dark, i tilt my arm to wake the watch up. And when you do that the watch is lock. It has never done this before i installed the workaround.
Feel free to uninstall SHM and use the watch without it, pretty sure it will happen again without my SHM, MOD is completely independent and has two roles, communicate with phone mod for data transfer and record BP/ECG... nothing else about lockscreen or screen going off and so on...
 
  • Like
Reactions: Robinaug

Robinaug

Member
Sep 22, 2021
6
1
You set up a lock on your watch, when the watch goes idle or it senses that it's not worn (loose strap or too much movement hard to read HR) it auto locks even of it was few seconds...
I tried it right now. I don't even have to do ECG or BP. I only have to open SHM on the watch, let the watch go dark (15 sec) and when I'm going to wake the watch up it's locked.
 

Shark7Shark

New member
Sep 23, 2021
3
1
Enabling features in set features as in Enabling dev and developer mode in Samsung Health, force stopping, clearing cache and starting Samsung Health again before opening SHM, yes?

Edit: I see you fixed it by force closing
I had already forced stopped once and did the cache clear, but second time worked. Probably just accidentally reopend SH or something.
 
  • Like
Reactions: Dante63
Yes. If i open the SHM, do an ECG. After its done let the screen timeout. Then when i tilt to awake the watch is locked and I have to use my pattern to unlock it.
That didn't answer the questions I asked 🤔, I don't have my watch4 yet...

How do you make your watch go dark?
And 15 seconds is for the watch display timeout?

I know the wakeup is a gesture where you raise and tilt your hand...

But as I know from watch3:
Screen__20210923_022856.png
Hence why I said, you can remove SHM MOD from your watch and test all apps, I'm confident you will get the lock screen in some cases, in fact, you can do some tests on Samsung Health, since it's almost the same as Taking BP or ECG, like the BMI or SpO2 and so...

Also, if you have a tattoo, it will affect the detection, the lockscreen is set to screen and payments from my guess so just slight looseness or loss of detection is enough to lock the watch...
 

Robinaug

Member
Sep 22, 2021
6
1
Let the watch go dark meaning?
15 sec is your screen timeout setting?
Yes. If i open the SHM, do an ECG. After its done let the screen timeout. Then when i tilt to awake the watch is locked and I have to use my pattern to unlock it.
That didn't answer the questions I asked 🤔, I don't have my watch4 yet...

How do you make your watch go dark?
And 15 seconds is for the watch display timeout?

I know the wakeup is a gesture where you raise and tilt your hand...

But as I know from watch3:
View attachment 5416489
Hence why I said, you can remove SHM MOD from your watch and test all apps, I'm confident you will get the lock screen in some cases, in fact, you can do some tests on Samsung Health, since it's almost the same as Taking BP or ECG, like the BMI or SpO2 and so...

Also, if you have a tattoo, it will affect the detection, the lockscreen is set to screen and payments from my guess so just slight looseness or loss of detection is enough to lock the watch...
The watch goes dark after 15 sec like a timeout to save battery. I have chosen 15 sec, you can choose a longer time if you want.

I know that if i remove my watch it will be locked when I'm waking it up after. I have a snug fit and the watch is not sliding on my arm, i have no tattoo there either. I haven't seen this behavior before with any of my apps. It started after the SHM MOD and it's only happening after i have opened the SHM :/. I just got the newest update on the watch as i write and it's still behaves the same.

It's wired. Perhaps uninstall and be with out it. Buts it'd good, for me it's really accurate.
 
Yes. If i open the SHM, do an ECG. After its done let the screen timeout. Then when i tilt to awake the watch is locked and I have to use my pattern to unlock it.

The watch goes dark after 15 sec like a timeout to save battery. I have chosen 15 sec, you can choose a longer time if you want.

I know that if i remove my watch it will be locked when I'm waking it up after. I have a snug fit and the watch is not sliding on my arm, i have no tattoo there either. I haven't seen this behavior before with any of my apps. It started after the SHM MOD and it's only happening after i have opened the SHM :/. I just got the newest update on the watch as i write and it's still behaves the same.

It's wired. Perhaps uninstall and be with out it. Buts it'd good, for me it's really accurate.
Very odd, so I know you reported this issue and there is another, so 2 reports about lock, I'll ask on Telegram to test this, if it happens to them as well, then I could be wrong about mod having nothing to do with all this
 
  • Like
Reactions: Robinaug

KlausPactus

Member
Feb 1, 2012
30
3
Sao Paulo
I have a question about the Samsung Health itself, I'm using a old galaxy device, I was able to install android 7.1.2 and pair the watch and the Health monitor with success, but the Samsung Heath app cannot see the watch, I'm using an old version of the Samsung health (Samsung Health 6.15.6.001 (arm64-v8a + arm + arm-v7a) (Android 6.0+)), it's possible to add the galaxy watch4 libraries to this app? Or maybe help me to install the latest galaxy health app on my android 7.1.2 device (the latest version asks for android 8+)
 
Last edited:
I have a question about the Samsung Health itself, I'm using a old galaxy device, I was able to install android 7.1.2 and pair the watch and the Health monitor with success, but the Samsung Heath app cannot see the watch, I'm using an old version of the Samsung health (Samsung Health 6.15.6.001 (arm64-v8a + arm + arm-v7a) (Android 6.0+)), it's possible to add the galaxy watch4 libraries to this app? Or maybe help me to install the latest galaxy health app on my android 7.1.2 device (the latest version asks for android 8+)
It's not possible to add libraries of higher sdk to lower sdk, it won't work, watch4 libraries are located inside 6.17 and above as I recall...
 
  • Like
Reactions: KlausPactus

Deanos_T

Member
Sep 16, 2021
41
16
OK WOW! I see a lot has happened since my last visit 6 pages ago! 🤣🤣

I see the Watch4 had an update today to version
R870XXU1BUI5
SM-R870NZKAXFA

Not sure if it's a regional update, but anyone else get it?

Any adverse effects on the mods installed?
So far everything is still working 100% my side, but still no SP02 or Blood Glucose (whatever that is...)

Also 2 days ago, my sleep thingy just miraculously started working again, including the snoring recording thing (so funny!)

Sync still working. ECG and BP still working...

I'm still happy.
 
  • Like
Reactions: Dante63
OK WOW! I see a lot has happened since my last visit 6 pages ago! 🤣🤣

I see the Watch4 had an update today to version
R870XXU1BUI5
SM-R870NZKAXFA

Not sure if it's a regional update, but anyone else get it?

Any adverse effects on the mods installed?
So far everything is still working 100% my side, but still no SP02 or Blood Glucose (whatever that is...)

Also 2 days ago, my sleep thingy just miraculously started working again, including the snoring recording thing (so funny!)

Sync still working. ECG and BP still working...

I'm still happy.
It's rolling out everywhere and the update has no impact on the MOD...

You mean SpO2 and BMI,
because there is no glucose measurement...

I don't think it's FDA approval feature, I think it's related to country rules 🤔
 

FunnyPCCC

Member
Jul 27, 2016
5
1
Hello, is there any way to specify the language of SHM?
SHM supports traditional Chinese, but the premise is that my system language must also be traditional Chinese... If my system language is set to simplified Chinese, SHM can only be displayed in English, which puzzles me.
I hope the system language is set to simplified Chinese, and SHM is also traditional Chinese.
So is there any way to do it? (my English is very poor, so my expression may not be very clear, sorry...):cry:
 

Top Liked Posts

  • 2
    hat i can flash alongside the stock Sams

    Dont worry, i took a holiday from Samsung to avoid the nonsense for years, but then Google stopped making decent Pixel phones, so ive unfortunately been back in the fold for about a year now...it hasnt been happy times for me

    I do know how to remove the encryption on an S20+ 5G at least, and in fact, using info from an old post on here, i now actually have created a .tar file that i can flash alongside the stock Samsung ROM to automatically install TWRP at ROM flash time, reboot to it (no needing to nail the vulcan death grip of special keys at the right time in boot process), format /data and immediately disable encryption and then reboot to system to start for 1st time setup, automatically like magic.... i will share it at some point soon for my other S20+ 5G brethren.

    I dont know off the top of my head much about the S22 but will look into the threads later today to see what the situation is there for installing TWRP and whether theres a "multi disabler" (as its generally called) zip that does the encryption disabling, for most Samsung devices there is...or you could have a scrounge before i do ....

    As mentioned disabling encryption can be a pain in the butt, as you have to create a .tar file with TWRP recovery img in it, flash it alongside the stock ROM (with auto reboot off in ODIN), then (with cable plugged in, otherwise you stand NO chance of getting into it) reboot into the newly written TWRP (if you miss it you will have to reflash the TWRP .tar, because booting to system will overwrite TWRP with stick recovery), then format /data and then flash the multi disabler zip. Almost no one gets this stupid procedure right first go...sometimes even i botch it and ive done it since S2 days...hence why when i found this automated method i refer to above, i spent some time updating the contents of it :)

    Ill look later for the S22 procedures/files, in about 8 hours

    As @Dante63 alluded to, theres a magisk module you can try, available from the Releases page of my repo here:



    @Dante63:

    Im testing a (lightly) debloated stock ROM based ROM at the moment, and dont even need that module - a quick grep of the file i alter reveals that the key type my module removes is in effect, but my SHealth works fine, so id love to know what the ROM dev has removed to make this work, he does mention removing parts of knox....im planning to ask to see if i can apply it via magisk....

    ROM "features":

    ROM Features
    <*>Knox partially removed and ROM light debloated</*>
    <*>Removed dm-verity, automatic encryption, proca & vaultkeeper services</*>

    in the meantime, on this ROM:

    grep "ro.security.keystore.keytype" /vendor/build.prop

    returns:

    ro.security.keystore.keytype=sakv2,gak,sgak
    So these were my scenarios so far:

    Unlocked BL:
    -Stock ROM, stock recovery, no root: SHM works, SH does not work
    -Stock ROM, stock recovery, root: SHM does not work, SH does work (shamiko+sakv2) -> not running samsung official software message
    -Stock ROM, stock recovery, root: SHMmod does not work, SH does work (shamiko+sakv2) -> not running samsung official software message

    -Stock ROM, TWRP, no root: SHM does not work, SH does not work -> not running samsung official software message
    -Stock ROM, TWRP, root: SHM does not work, SH does work (shamiko+sakv2) -> not running samsung official software message
    -Stock ROM, TWRP, root: SHMmod does not work, SH does work (shamiko+sakv2) -> not running samsung official software message


    Locked BL, everything stock:

    No "not running samsung official software" message and no "unlocked bootloader message"
    Samsung Health still does not work, SHM works.


    Whatever the case is, I either get SHM to work or SH, not both. Whenever the red "official software" message is displayed (root), SHM does not work, while SH does not work without root (shamiko+sakv2).

    As for the TWRP tar files. There are in fact TWRP and vbmeta files with a multidisabler for my model, but apart from installing TWRP, it does nothing to encryption. Well it says it disabled encryption, but nothing really happens.


    This has to be by far my worst and most time consuming experience in the mobile world since I got my first device in the late 90s. I'd say some things about the MD's/VP's who enforced those policies, but I'd get banned...so I'll leave them to your immagination.

    Thank you all for your time :D
    1
    😅 tap the version number many times till it appears...
    oh you were right, everything worked fine!
    Thank you very much for your help.
    1
    hello, i just got my watch 5 pro. Will this work on my watch also, even with the same fies in google drive?
    Already mentioned it works
    1
    So these were my scenarios so far:

    Unlocked BL:
    -Stock ROM, stock recovery, no root: SHM works, SH does not work
    -Stock ROM, stock recovery, root: SHM does not work, SH does work (shamiko+sakv2) -> not running samsung official software message
    -Stock ROM, stock recovery, root: SHMmod does not work, SH does work (shamiko+sakv2) -> not running samsung official software message

    -Stock ROM, TWRP, no root: SHM does not work, SH does not work -> not running samsung official software message
    -Stock ROM, TWRP, root: SHM does not work, SH does work (shamiko+sakv2) -> not running samsung official software message
    -Stock ROM, TWRP, root: SHMmod does not work, SH does work (shamiko+sakv2) -> not running samsung official software message


    Locked BL, everything stock:

    No "not running samsung official software" message and no "unlocked bootloader message"
    Samsung Health still does not work, SHM works.


    Whatever the case is, I either get SHM to work or SH, not both. Whenever the red "official software" message is displayed (root), SHM does not work, while SH does not work without root (shamiko+sakv2).

    As for the TWRP tar files. There are in fact TWRP and vbmeta files with a multidisabler for my model, but apart from installing TWRP, it does nothing to encryption. Well it says it disabled encryption, but nothing really happens.


    This has to be by far my worst and most time consuming experience in the mobile world since I got my first device in the late 90s. I'd say some things about the MD's/VP's who enforced those policies, but I'd get banned...so I'll leave them to your immagination.

    Thank you all for your time :D

    have seen it, just had a long day and reading over dinner, will let it permeate my brain and get back when i have a decent reply. But makes little sense you have only either or when rooted....

    The usual process for the multidisabler and disabling encryption is:

    flash TWRP via ODIN
    immediately boot to recovery with special key combo
    format data via TWRP
    flash multidisabler

    the only possible way that fails is perhaps, as happened to me on my S20+ a few months back, Samsung changed their partitioning and the multidisabler hasnt been updated to take this into effect...which would mean it wouldnt disable encryption as expected, this happened to me and as a result of being a guinea pig, a member on here updated the multidisabler script. if you want to send me the one for your model via personal message, ill have a look at it

    I suspect youve figured out that "not running samsung official software' is just a byproduct of unlocking the bootloader, so its just noise in the background of the actual issue itself

    (previously displayed link removed after i realised you had a snapdragon model, and it was for exynos)
  • 6
    SHM MOD Companion updated, I have implemented the auto update feature and patched few things in it...

    I also patched the phone shm mod for both Tizen and WearOS, fixed the Chinese translation thanks to @123哆3 ...
    4
    How about changing the requirement to recalibrate?
    Doing this every month is really silly and not that much necessary if you think again.
    Especially for young people, it looks weird measuring your blood pressure with a blood pressure monitor 3 times every month, just to see your blood pressure.
    Recalibration is ok but maybe 6 months, not every month.
    A simple explanation from the Telegram group on why there is a calibration:
    Screenshot_20220823-184341_Telegram.jpg
    3
    Replying to @Dante63 to thank you very much for all of your original work to start this and your continued work to keep it up to date and improve it even to this day.

    We are now successfully working on the Galaxy Watch 5 and 5 Pro with this working method provided for watch and phone apps, yes I am using Samsung Note 20 Ultra phone.

    Here is a breakdown of the watch 5 / 5 Pro to get into adb debugging with wifi using Bugjaeger.
    This time we go into the watch settings >> about watch >> software info >> keep clicking the software version until it tells you developer mode ON.
    Then goto watch settings >> Developer Options >> 1. turn on adb debugging
    Then goto watch settings >> Developer Options >> 2. debug over wireless
    Then goto watch settings >> Developer Options >> Wireless debugging >> + pair new deveice

    In Bugjaeger we then start up the connection and click pair, enter the IP, the port and the passcode.
    At this point it will be connected in Bugjaeger and the watch will beep showing a new notification for debugging.

    The rest of it was the same as described in the OP for the phone.

    Link to reply for sideloading apps list:

    OP for this info to get it into more members feed:
    3
    Sorry everyone, the link to the companion is broken, so I'll be patching the companion and changing it from static value to dynamic just in case the link changes again...

    Download the companion from here:
    2
    i know it is somewhere in this threat, but i can not find it. I wanna delete the original shm. What is the name of shm on watch ?
    i had to reinstall the entire watch, and i dont want to have both....

    adb shell pm uninstall -k --user 0 com.samsung.android.shealthmonitor
  • 336
    Hello Everyone,
    I hope you all are fine...
    Google_WearOS.png

    ~~~ WearOS WATCHES ONLY ~~~
    20220106_171041.jpg20220106_164719.png
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, removed country restriction and lowered age limit from 22 to 16, both apps have additional languages translated by me...
    • BUGS: Theming bugs...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • About ECG in SH: ECG has never synced to Samsung Cloud, since the first release of SHM, the ECG tile is missing in Samsung Health with SHM WearOS but rest assured that the ECG tile of Samsung Health has no use other than being a shortcut to open SHM at ECG tab...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • FUTURE WORKS: fix theme bugs...
    • NOTE FOR SAMSUNG ROOT USERS: Device encryption will play a big role if you leave it, you most likely will end up with error ERR_INTEGRITY which makes shm refuse to communicate with the watch... the solution would be flashing encryption disabled...

    • IMPORTANT NOTE ABOUT POSTING: Please search the thread and read the F.A.Q first before posting your problem, PROVIDE DETAILS, SCREENSHOT, VIDEOS IF POSSIBLE, DO NOT JUST SAY "IT'S NOT WORKING" OR "IT'S CRASHING", details are important if you want me to help you and to get it fast... SHM MOD WearOS needs to be installed on both watch and phone, if the shm mod is working on the watch and phone but shows no compatible watch found, restart the phone and watch, do not post not working if you installed only one of them or haven't tried restarting both phone and watch...
    ~~~ For Tizen (Active2 And Watch3), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Do I need to install both phone and watch MODs?
      Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...
    6. Where is the IP Address?
      You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...
    7. Can I do this from my phone?
      Yes, you can use Bugjeager if you don't like to type commands or Remote ADB Shell if you want to type the commands...
    8. How do I update?
      Just install it again and it will update, whether you install the phone app or the watch app...
    9. Do I need Samsung Health MOD, is there even such thing...?
      There is no Samsung Health MOD, Samsung Health is a core application, modding it will break many services, using official Samsung Health works fine...

    ~~~ Pairing issues with Watch4 on Galaxy Wearables (Watch4 not supported!) ~~~

    Initially it was Huawei devices but this solution works for other devices as well...

    This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance


    You need Galaxy Wearables & Watch4 Plugin installed, now do the following steps:
    1. Download Samsung Health.
    2. start Samsung health then go to accessories and search for your watch (scan).
    3. Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
    Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
    It was Explained that you need to have the following apps installed:

    Galaxy Wearable & Watch 4 plug-in

    Give all permissions to Galaxy Wearables and the Watch4 plugin by going app info, scroll down, permission and grant all...

    Now Clear the data of the following applications:

    • Google Play Services
    • Google Play Framework
    • Google Play Store
    • HwWifiproBqeService (For Huawei devices only, skip if you are not Huawei)
    The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4 again through Samsung Health and it should work, after that you can do whatever you want for google...

    One last note, disable any battery optimization, some phones have aggressive optimization, they will kill background services, this will stop the watch4 from pairing, if you can't disable it, then whitelist galaxy wearble and the watch4 plugin!

    ~~~ WearOS - SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/Wqfz67IUMuY

    Just a second friendly reminder 😊 , *inhales deeply*:

    !!!DON'T FORGET TO TURN OFF ADB ON THE WATCH, IT WILL DRAIN YOUR BATTERY!!!

    *ehm* enjoy the SHM MOD now 😆...

    If you see "no compatible watch found" or similar, please restart the watch and phone and try again, it should work...
    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:


    I believe the folders describe themselves, the APK at the root is to be installed on your phone, the file at the root of folder "ADB Watch4" is to be installed on the Watch4, you have instructions for ADB in different Languages and you have the Original SHM for the watch4 and there will be a history of the Watch4 SHM MOD...

    ~~~ SHM MOD Companion ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/a0FO9pwqMkQ

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

    InShot_20220106_203513211.jpg20220106_203225.jpg20220106_203023.jpg

    IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

    The steps are easy to follow, first, let's enable the set features on Samsung Health,
    1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
    2. Extract it inside the Download folder on your phone internal Storage...
    3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
    or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
    Screenshot_20211216-140353_My Files.jpg
    4. Never delete this folder...
    5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

    to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_232542732.jpgInShot_20210411_232636295.jpgInShot_20210411_201440606.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!

    ~~~ Using latest Samsung Health on Rooted Device ~~~
    Thanks to XDA @73sydney , quoting the solution for bypassing Samsung Health root detection, no more using Samsung Health MOD...

    Samsung Health Security Props​

    Removes "sakv2" from ro.security.keystore.keytype to help make Samsung Health run on rooted devices. This doesnt mean its a universal "fix" and works on every device every time, so ymmv....

    Disclaimer: The changes made by this module may have ramifications/consequences beyond what you may be using it for (Samsung Health). I have tested it for several days and havent found any personally, but this doesnt mean they dont exist. You use this at your own risk
    This module:
    • looks for /vendor/build.prop
    • if found, it copies the ro.security.keystore.keytype line (in case not everyone has the same keytypes in the line - i hate using static files, i write modules to use whats on each device) to a new system.prop file in the modules folder
    • removes sakv2 from the line in system.prop (it will remove sakv2 from the line (hopefully) wherever it exists, beginning, end or middle)
    I had planned to test this new "fix" for a while before releasing the module to stop people from manually editing the existing file, as using magisk is preferable as its easily reversible, but once i saw posts on XDA about it, i figured id release this now

    As mentioned above, there may be side effects to this "fix", ymmv

    Note: You still need to make sure you have Samsung Health added to Magisk's Deny List, ideally with Shamiko installed (if using Shamiko dont forget to disable Enforce Deny List)

    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC (if no sim or location provided)

    List of Country Codes Alpha-2:
    EU_CSC (Total 35):
    "AT"
    "BE"
    "BG"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GR"
    "HR"
    "HU"
    "IE"
    "IT"
    "LT"
    "LV"
    "NL"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    "LU"
    "MT"
    "GB"
    "CH"
    "IS"
    "NO"
    "LI"
    "TR"
    "RS"
    "CY"
    EU_MNC (Total 29):
    "AT"
    "BE"
    "BG"
    "CH"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GB"
    "GR"
    "HR"
    "HU"
    "IE"
    "IS"
    "IT"
    "LT"
    "LV"
    "NL"
    "NO"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    NON-EU (Total 14):
    "KR"
    "US"
    "BR"
    "CL"
    "AE"
    "ID"
    "HK"
    "RU"
    "SG"
    "AZ"
    "GE"
    "PY"
    "AU"
    "TW"

    SHM will work only if the following is not detected on your Samsung Device:
    Paths:
    "/data/local/"
    "/data/local/bin/"
    "/data/local/xbin/"
    "/sbin/"
    "/su/bin/"
    "/system/bin/"
    "/system/bin/.ext/"
    "/system/bin/failsafe/"
    "/system/sd/xbin/"
    "/system/usr/we-need-root/"
    "/system/xbin/"
    "/system/app/Superuser.apk"
    "/cache"
    "/data"
    "/dev"
    Apps:
    "com.noshufou.android.su"
    "com.noshufou.android.su.elite"
    "eu.chainfire.supersu"
    "com.koushikdutta.superuser"
    "com.thirdparty.superuser"
    "com.yellowes.su"
    "com.devadvance.rootcloak"
    "com.devadvance.rootcloakplus"
    "de.robv.android.xposed.installer"
    "com.saurik.substrate"
    "com.zachspong.temprootremovejb"
    "com.amphoras.hidemyroot"
    "com.amphoras.hidemyrootadfree"
    "com.formyhm.hiderootPremium"
    "com.formyhm.hideroot"
    "com.koushikdutta.rommanager"
    "com.koushikdutta.rommanager.license"
    "com.dimonvideo.luckypatcher"
    "com.chelpus.lackypatch"
    "com.ramdroid.appquarantine"
    "com.ramdroid.appquarantinepro"
    Binary:
    "su"
    "busybox"
    SU:
    "/system/xbin/which"
    "su"
    Test-Keys:
    "test-keys"

    ~~~ Special Thanks ~~~

    Thanks to the amazing people on my Telegram group and Reddit users that reached me, thanks to everyone that tested the MOD and making it happen before I got my watch...

    Thanks to @pavanmaverick he found out about the Tizen sync working for WearOS...
    Big Thanks to XDA @Zacharee1 for decompiling and diving into Samsung Health code to find a way to enable set features on any Samsung Health version, no more downgrading...


    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊monthly or one time through PayPal ...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    75
    What's New (new video will be uploaded soon):
    Changelog,
    Latest Changes:

    --- 18th Sept 2022 - Patched Tizen & WearOS SHM MOD 1.1.1.209 for phone... I also patched the shm mod companion, you can read more in the companion what's new section...

    --- 17th Aug 2022 - Released WearOS SHM MOD 1.1.1.209 for phone, added to Description of the thread Watch5 supported (according to users) and released watch shm mod 1.1.0.215...
    --- 28th May 2022 - Patched phone SHM MOD adding Theme selector and created SHM MOD Companion that would assist you in getting updates, BP sync enabler, reaching me and so...
    --- 4th May 2022 - Patched phone SHM MOD changing the icon from static to adaptive icon, bye bye ugly white frame...
    --- 26th April 2022 - I have released Watch SHM MOD 1.1.0.203, it has the new list of countries support, seems like they have optimized the BP and ECG logic on the watch as well, nothing else that is new...
    --- 23rd March 2022 - Patched SHM "Age 16 and above" bug...
    --- 22nd March 2022 - Released WearOS SHM MOD 1.1.1.191 for phone...
    --- 11th February 2022 - Patched WearOS SHM MOD 1.1.1.181, it has DarkMode (98% completed) and I fixed PDF sharing and exporting for Turkish language... I have released Watch SHM MOD 1.1.0.193 which has the orientation for the new watch4 update...
    --- 29th January 2022 - Patched WearOS SHM MOD 1.1.1.181, sharing and viewing PDF files had an issue, sorry about that, it's working now, just refresh Google drive and grab the new file and install it to overwrite what you have...
    --- 19th January 2022 - Released WearOS SHM MOD 1.1.1.181 for phone...
    --- 22nd November 2021 - Patched WearOS SHM MOD 1.1.1.171 and WearOS SHM MOD 1.1.0.185 for Watch4 by adding 3 languages (Turkish, Persian and Filipino), changed the design of the logo for phone and watch, changed the naming of the phone MOD in Google Drive...
    --- 16th November 2021 - Released WearOS SHM MOD 1.1.1.171 for Phone...
    --- 14th November 2021 - Released WearOS SHM MOD 1.1.1.169 for phone and WearOS SHM MOD 1.1.0.185 for Watch4...
    --- 17th October 2021 - testing complete - introducing 4 new languages, Hindi, Punjabi, Japanese and Malay...
    --- 12th October 2021 - I have done some changes in my drive, now there are 2 READ ME folders for ADB commands "READ ME - ADB Auto instructions" (this is new) & "READ ME - ADB Manual instructions" (this is the old READ ME), the idea is to have a bat file that will do all adb commands, so no need to install or type anything, all you need to do is run the bat file and select what you want to do...
    --- 27th September 2021 - some users reported that sync stopped in new Samsung Health, when investigated, the new update was a major update and it reset set features back to original values, it did not break the sync, do the required changes again in set features of Samsung Health and check that SHM permissions are still enabled and the sync will work again...
    --- 26th September 2021 - Added Vietnamese Language support to the phone and watch4 SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also added in Chinese and Vietnamese "Google Translated by XDA-Dante63" as it's an unofficial translation + fixed age 22, I never thought Samsung would add a 4th age check...
    --- 24th September 2021 - Added Chinese Simplified Language to the watch and phone SHM MOD, so now the app won't be shown in the English Language, if there are any mistakes, please let me know, it would be nice to support languages that are unavailable, I also updated the F.A.Q Section...
    --- 21st September 2021 - Added a video showing how to enable set features on Samsung Health to enable the BP sync between Samsung Health and Samsung Health Monitor...
    --- 20th September 2021 - Thanks to XDA @pavanmaverick for his great finding that the method used in Tizen thread for BP sync between Samsung Health and Samsung Health Monitor actually works for WearOS, I have added that section on this thread with slight modification and extra steps... Big Thanks to @Zacharee1 for going a step further and finding how to enable set features...
    --- 13th September 2021 - Patched and fixed the share PDF problem in the Phone SHM MOD 1.1.1.157, you should be able to share and export reports with no problems, have a great day 😁...
    --- 9th September 2021 - Patched and released WearOS SHM MOD 1.1.1.157, support for AU and heavy code optimization + seems like there is BP cuff feature being implemented but hasn't been released yet... I have also patched and released the watch4 SHM MOD 1.1.0.175, update shows heavy code optimization and support for AU as well, i also did a patch for low battery, now you can use SHM even if you have low battery...
    --- 4th September 2021 - Updated thread, added a F.A.Q section for a video I made that should answer questions for those who are new to the SHM MOD...
    --- 2nd September 2021 - Patched some new restrictions I bumped into, removed the following "low ram", "low storage" and "low battery" errors, they prevent launching SHM...
    --- 31st August 2021 - updated instructions for Huawei Devices connectivity issues again and removed the Galaxy Wearable MOD, Some users followed the Reddit instructions and faced disconnect issue, I read the logs and added the solution for the disconnect problem...
    --- 29th August 2021 - updated instructions for creating Galaxy Wearables MOD for Huawei devices according to the Reddit instructions and uploaded a modded galaxy wearables apk with test-keys so you guys can update it till Samsung or Huawei fix this problem...
    --- 28th August 2021 - updated instructions, turned out that the Patch I applied on the Watch4 SHM MOD made it independent, no need for the Original SHM to be installed anymore...
    --- 27th August 2021 - patched the watch4 shm update 171 and released it, simply adb install it and it will update the mod, you don't need to update the original SHM...
    --- 26th Aug 2021 - Patched the watch4 SHM MOD, I never thought it would have restrictions, oh well, patch include (country restrictions removed, BP disable removed, force update removed and Age changed from 22 to 16), simply install and it will update, no need to uninstall the previous MOD... Oh and Canada does not have SHM on the watch, probably some countries won't have it too, I updated the thread to include a section for "Missing Original SHM" and I updated the ADB instructions and I removed port since ADB connects to defalt by itself, you just need the IP of the watch...
    --- 25th Aug 2021 - Another patch I have done on 153, since the link between Samsung Health and SHM is broken, I decided to remove the pop-up dialog that asks to sync, it's confusing some people... Also, after some tests done by a telegram member, it is possible to disable and hide the Original SHM on the Watch by doing Connection the watch to ADB and going into adb shell and typing pm disable-user --user 0 com.samsung.android.shealthmonitor and exiting the shell and disconnecting... instructions updated...
    --- 23rd Aug 2021 - patched SHM 153, added a WearOS logo to the phone app and changed app version label included wearos, this is just to ensure that you don't use WearOS SHM with Watch3 or Active2 because it's not compatible, patched Watch4 MOD 169 to have a ring on the widget to make it more friendly to the eye (there is a bug in galaxy wearable if you add tiles, you will see the widgets not displaying correctly, so set it from the watch if you can't tell which is the original and which is the MOD and organize it on the phone later if you want), I also patched SHM 153 for Watch4 in way that it can work with SHM 153 for Tizen, users that have both watches connected to the same phone can enjoy using both SHMs and finally, on my google drive, I decided to add "Phone.WearOS." at the beginning of every phone application, this will help users that have both Tizen and WearOs watches in knowing what each apk is for...
    I added a section of watch4 pairing with Huawei issues and possible fix, it's done by reddit user, with small collab with me..
    --- 22nd August 2021 - Initial release of SHM MOD for Watch4...
    41

    These are photos from the Telegram group that members have done the tests:​

    photo1629567761.jpegphoto1629567694 (1).jpegphoto1629567694.jpegIMG_20210821_174554-min.jpgIMG_20210821_174703-min.jpg

    The SHM MOD on the Watch4 Has an M Heartbeat as a logo to distinguish it from the Original SHM. Also, SHM MOD Widgets on the watch Have a Ring to make it very friendly to the eye...​


    Set Features avaliable on latest Samsung Health:
    Screenshot_20211222-092518_Samsung Health.jpg
    18
    Happy one year anniversary to my SHM MOD, it's been a great journey and joy to help everyone and hopefully for more to come...

    And happy holidays to everyone in advance, stay safe all, god bless you all and Godspeed...

    Regards,
    Dante
    16
    So what's new in SHM 1.1.1.191:
    • New layout BP ISO activity - probably details about BP
    • Canada BP & ECG Support
    • Israel BP & ECG Support
    • Taiwan got BP Support now
    • Ukraine BP & ECG Support
    • Vietnam BP & ECG Support
    • Latin America BP & ECG Support
    • South Africa BP & ECG Support
    • BP Calibration Code changed
    • checkUpdateInterfaceWithLocation method, you will hate this very much, according to the logic of the code, BP & ECG is now enabled and locked based on location, so if you travel, brace yourself for "service not avaliable"
    • About section has isNoneApproveCountry which tells you whether country is approved or not, what's the point of this since the app doesn't run in none supported country you ask...? I have no clue...
    • CSC check sim card on Latin American and Caribbean (SELA)

    And th.. th... th... that's all folks...

    Due to the major changes, here is my plan:
    • Release the MOD without Darkmode in beta test...
    • If all goes well, it goes public and I start working on Darkmode and it goes into beta test...
    • If all goes well too, it goes live...

    I will do this on Weekend where I grab a big cup of coffee and go through Samsung Messy Code, wish me luck lol