Development [RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.1.227 - Root, Age, Country & Device Restriction Removed - 17th Feb 2023

How happy are you with the outcome?


  • Total voters
    1,000
Search This thread

absdotan99

New member
Nov 27, 2022
2
0
Many thanks Dante for providing this fix.

I installed SHM modded on both Pixel XL 4 android 13 and GW5. The phone app cannot find the watch. Many had this issue, and was resolved through reset. However this has not solved the issue. I am in a country that this feature is restricted. And helpful advise? Thanks
 

absdotan99

New member
Nov 27, 2022
2
0
Many thanks Dante for providing this fix.

I installed SHM modded on both Pixel XL 4 android 13 and GW5. The phone app cannot find the watch. Many had this issue, and was resolved through reset. However this has not solved the issue. I am in a country that this feature is restricted. And helpful advise? Thanks
Solved the problem by using SHM companion. Thanks
 

smashda

Member
Aug 14, 2022
17
7
Realme GT 2
Many thanks Dante for providing this fix.

I installed SHM modded on both Pixel XL 4 android 13 and GW5. The phone app cannot find the watch. Many had this issue, and was resolved through reset. However this has not solved the issue. I am in a country that this feature is restricted. And helpful advise? Thanks
Did you try to set it up, by first installnig the modded Samsung Health App, installing it on your phone (setting dev mode etc.) and then reset your watch, BUT DON'T SET IT UP THROUGH GALAXY WEAR APP!

Set it up through Samsung Health, you get into the App --> top right, three dots ... --> Settings --> Accessories (bottom, under the Name "General") --> and there you search your Watch.
I had to do it this way, too and now it works fine.
 

73sydney

Senior Member
@Dante63

Just a quick note to say i finally got time to set my Pixel 6 Pro and Watch 4 up - both Pixel 6 Pro and Watch 4 sitting idle for days as i hadnt done anything with either since i left my S20+ 5G for the Pixel 6 Pro....i only just barely set the phone up just enough to use...

Tonight rooted the Pixel 6 Pro - so nice to be allowed to unlock a bootloader without threats (and even be able to relock it if i want at any time with no warranty penalty) and easily root it. Flashed USNF Mod 2 and cleared data on Play store/Play Services to pass Integrity check. Installed Migrate, restored all my apps.

Connected to (phone connection severed) Watch 4 via adb on PC and backed up all my 3rd party apps. Reset Watch. Installed Galaxy Wearable app from Play Store...started pairing, hilariously the pairing seemed to fail then started up again as it realised it needed to download the Watch 4 Manager, which it did...and it took a while due to my connection...i was amazed that the Wearable installer waited so long without timing/erroring out, when the same thing on a Samsung probably would have ended in tears...when Watch 4 Manager finished downloading and installing the setup wizard kept going without any glitches at all....after all the drama ive had on my S20+ 5G the past few months it was the smoothest watch connection experience ive had in ages..

Debloated the Watch a bit (i have a batch for this), pushed my backed up 3rd party apps (including your SHM) to it, ran the Samsung Health on my Pixel, setup it up and enabled Set Features then set up SHM on watch then on my Pixel, granted permissions on both....Watch detected in mere seconds (didnt even have to reboot which is usually how i roll), no extra coaxing needed. Did an ECG...no drama

Smoothest setup in ages....almost makes up for the past year of fighting the S20+ 5G to do all this. No magisk modules needed either....

Honestly the only weirdness in the entire phone setup was not seeing call screen on my phone app settings, a quick force close of phone app, and relaunch forced a language download in that and that fixed that...

On a side note, as i shared with a friend:

debloat list on Samsung (stock ROM): 137 packages (A12) -169 packages (A13)
debloat list on Pixel 6 Pro (stock ROM): 4 packages (A13)
 
Last edited:
  • Like
Reactions: Dante63

labello29

Senior Member
Aug 7, 2014
622
119
italia
Hello Everyone,
I hope you all are fine...
View attachment 5391941
~~~ WearOS WATCHES ONLY ~~~
View attachment 5501433View attachment 5501435
~~~ FEATURES, BUGS & FUTURE WORKS~~~
  • FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, removed country restriction and lowered age limit from 22 to 16, both apps have additional languages translated by me...
  • BUGS: Theming bugs...
  • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
  • About ECG in SH: ECG has never synced to Samsung Cloud, since the first release of SHM, the ECG tile is missing in Samsung Health with SHM WearOS but rest assured that the ECG tile of Samsung Health has no use other than being a shortcut to open SHM at ECG tab...
  • SHM ChangeLog: see Post #2
  • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
  • FUTURE WORKS: fix theme bugs...
  • NOTE FOR SAMSUNG ROOT USERS: Device encryption will play a big role if you leave it, you most likely will end up with error ERR_INTEGRITY which makes shm refuse to communicate with the watch... the solution would be flashing encryption disabled...

  • IMPORTANT NOTE ABOUT POSTING: Please search the thread and read the F.A.Q first before posting your problem, PROVIDE DETAILS, SCREENSHOT, VIDEOS IF POSSIBLE, DO NOT JUST SAY "IT'S NOT WORKING" OR "IT'S CRASHING", details are important if you want me to help you and to get it fast... SHM MOD WearOS needs to be installed on both watch and phone, if the shm mod is working on the watch and phone but shows no compatible watch found, restart the phone and watch, do not post not working if you installed only one of them or haven't tried restarting both phone and watch...
~~~ For Tizen (Active2 And Watch3), LINK BELOW~~~


~~~ SHM MOD F.A.Q ~~~



~~~ Pairing issues with Watch4 on Galaxy Wearables (Watch4 not supported!) ~~~

Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4


~~~ WearOS - SHM MOD - Tutorial - XDA - Dante63 ~~~

If you can't see the YouTube video, visit the YouTube link: https://youtu.be/Wqfz67IUMuY

Just a second friendly reminder 😊 , *inhales deeply*:

!!!DON'T FORGET TO TURN OFF ADB ON THE WATCH, IT WILL DRAIN YOUR BATTERY!!!

*ehm* enjoy the SHM MOD now 😆...

If you see "no compatible watch found" or similar, please restart the watch and phone and try again, it should work...
REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...

~~~ FILES and Description ~~~
Here is the link to the files I am using:


I believe the folders describe themselves, the APK at the root is to be installed on your phone, the file at the root of folder "ADB Watch4" is to be installed on the Watch4, you have instructions for ADB in different Languages and you have the Original SHM for the watch4 and there will be a history of the Watch4 SHM MOD...

~~~ SHM MOD Companion - Get updates, Enable BP Sync and Much More ~~~
If you can't see the YouTube video, visit the YouTube link: https://youtu.be/Qx6Jorgbj0k

~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
If you can't see the YouTube video, visit the YouTube link: https://youtu.be/ZOAxR8_aB70

View attachment 5501607View attachment 5501609View attachment 5501611

IMPORTANT NOTE: Updating Samsung Health may reset "set features" back to original values and this disables the sync, change them again to enable the sync and check the permissions of SHM MOD, it should be enabled as well...

The steps are easy to follow, first, let's enable the set features on Samsung Health,
1. Download from my Google Drive "SamsungHealth.zip" on your phone from inside the folder "Enable BP Sync"...
2. Extract it inside the Download folder on your phone internal Storage...
3. Check the extracted Folder and its contents on your phone, the path should look like "/Internal Storage/Download/SamsungHealth/FeatureManagerOn"
or "/storage/emulated/0/Download/SamsungHealth/FeatureManagerOn"...
View attachment 5483999
4. Never delete this folder...
5. Force stop Samsung Health, then open it, go to settings, then scroll down to about Samsung Health, now tap on the version till set features is enabled...

to enable the developer mode on Samsung Health:
Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

On SHM MOD, open the side menu -> Data -> Data Permissions and tap on Samsung Health, Make sure permissions are enabled so it would start syncing...!

~~~ Using latest Samsung Health on Rooted Device ~~~
Thanks to XDA @73sydney , quoting the solution for bypassing Samsung Health root detection, no more using Samsung Health MOD...


~~~ ABOUT THE ORIGINAL SHM ~~~
According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC (if no sim or location provided)

List of Country Codes Alpha-2:
EU_CSC (Total 35):
"AT"
"BE"
"BG"
"CZ"
"DE"
"DK"
"EE"
"ES"
"FI"
"FR"
"GR"
"HR"
"HU"
"IE"
"IT"
"LT"
"LV"
"NL"
"PL"
"PT"
"RO"
"SE"
"SI"
"SK"
"CY"
"LU"
"MT"
"GB"
"CH"
"IS"
"NO"
"LI"
"TR"
"RS"
"CY"
EU_MNC (Total 29):
"AT"
"BE"
"BG"
"CH"
"CZ"
"DE"
"DK"
"EE"
"ES"
"FI"
"FR"
"GB"
"GR"
"HR"
"HU"
"IE"
"IS"
"IT"
"LT"
"LV"
"NL"
"NO"
"PL"
"PT"
"RO"
"SE"
"SI"
"SK"
"CY"
NON-EU (Total 14):
"KR"
"US"
"BR"
"CL"
"AE"
"ID"
"HK"
"RU"
"SG"
"AZ"
"GE"
"PY"
"AU"
"TW"

SHM will work only if the following is not detected on your Samsung Device:
Paths:
"/data/local/"
"/data/local/bin/"
"/data/local/xbin/"
"/sbin/"
"/su/bin/"
"/system/bin/"
"/system/bin/.ext/"
"/system/bin/failsafe/"
"/system/sd/xbin/"
"/system/usr/we-need-root/"
"/system/xbin/"
"/system/app/Superuser.apk"
"/cache"
"/data"
"/dev"
Apps:
"com.noshufou.android.su"
"com.noshufou.android.su.elite"
"eu.chainfire.supersu"
"com.koushikdutta.superuser"
"com.thirdparty.superuser"
"com.yellowes.su"
"com.devadvance.rootcloak"
"com.devadvance.rootcloakplus"
"de.robv.android.xposed.installer"
"com.saurik.substrate"
"com.zachspong.temprootremovejb"
"com.amphoras.hidemyroot"
"com.amphoras.hidemyrootadfree"
"com.formyhm.hiderootPremium"
"com.formyhm.hideroot"
"com.koushikdutta.rommanager"
"com.koushikdutta.rommanager.license"
"com.dimonvideo.luckypatcher"
"com.chelpus.lackypatch"
"com.ramdroid.appquarantine"
"com.ramdroid.appquarantinepro"
Binary:
"su"
"busybox"
SU:
"/system/xbin/which"
"su"
Test-Keys:
"test-keys"

~~~ Special Thanks ~~~

Thanks to the amazing people on my Telegram group and Reddit users that reached me, thanks to everyone that tested the MOD and making it happen before I got my watch...

Thanks to @pavanmaverick he found out about the Tizen sync working for WearOS...
Big Thanks to XDA @Zacharee1 for decompiling and diving into Samsung Health code to find a way to enable set features on any Samsung Health version, no more downgrading...


~~~ Don't forget to ~~~
Don't forget to smash the (y)THANKS (y)
PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊monthly or one time through PayPal ...


You can also support me through Google Play by installing:
And you can Enjoy some Amazing Watchfaces I published
while you are at it...


✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
✯ Telegram: https://t.me/xda_dante63
Hello MAN first of all I want to say THANK YOU SO MUCH FOR YOUR TIME AND JOB. Secondly I've tried many times to doing but I can't understand one step on the "automatic mode" so I closed the process I send you a picture to explain what I don't understand..thank you and sorry for my bad English
 

Attachments

  • 20221129_120312.jpg
    20221129_120312.jpg
    1.8 MB · Views: 31
  • Like
Reactions: 73sydney
Did you restart both watch and phone..?
~~
你有没有重启手表和手机..?
Hello MAN first of all I want to say THANK YOU SO MUCH FOR YOUR TIME AND JOB. Secondly I've tried many times to doing but I can't understand one step on the "automatic mode" so I closed the process I send you a picture to explain what I don't understand..thank you and sorry for my bad English
It says drag and drop the watch shm mod apk... when you do that, windows will type the full path on your behalf, you hit enter and the process of sending file to watch should start
 

labello29

Senior Member
Aug 7, 2014
622
119
italia
Did you restart both watch and phone..?
~~
你有没有重启手表和手机..?

It says drag and drop the watch shm mod apk... when you do that, windows will type the full path on your behalf, you hit enter and the process of sending file to watch should start
Hi I tried, the process going well but in the watch remains the stock version..I don't why, maybe I wrong some steps...thanks
 
Hi,
I would like to install your modded version of Samsung health on my brand new galaxy watch 5 pro, using bugjaeger directly on my phone.
How can i uninstall the previous official samsung health app?
You can use shm mod companion,
Connect to IP, one click removes stock shm and select apk to install it on the watch, straightforward, all in one tool...
Hi I tried, the process going well but in the watch remains the stock version..I don't why, maybe I wrong some steps...thanks
You want to remove the stock...?
 
  • Like
Reactions: 73sydney
I tried to remove only the original
but it still there also..I really don't understand 🙄
Kindly share a screenshot of what you used and the results...
I just want to install the moded samsung health apk on my watch from my phone, with no pc.
Have to to uninstall the stock version before to install the moded one?
No need, you can have both on the watch but if you get confused or mix up between stock and mod, then remove the stock...
 
  • Like
Reactions: 73sydney

labello29

Senior Member
Aug 7, 2014
622
119
italia
Kindly share a screenshot of what you used and the results...

No need, you can have both on the watch but if you get confused or mix up between stock and mod, then remove the stock.

Kindly share a screenshot of what you used and the results...

No need, you can have both on the watch but if you get confused or mix up between stock and mod, then remove the stock...
Hi after all I'm done it. I'm going to changed the computer from w7 to w10 and it works Finally. But I tried to step up with Samsung health but it doesn't work because the version has changed so the patch doesn't work 🤷‍♂️
 
Hi after all I'm done it. I'm going to changed the computer from w7 to w10 and it works Finally. But I tried to step up with Samsung health but it doesn't work because the version has changed so the patch doesn't work 🤷‍♂️
Avoid using Patched Samsung Health because of server connectivity, it will constantly break and you won't have cloud storage and some functionality wouldn't work because of signature check...

My guess is you have a rooted Samsung device, there is a section on the thread on how to use latest Samsung Health and bypass root detection, give it a shot and hopefully it works...
 

SGr33n

New member
Nov 30, 2022
3
1
Hi!
Just installed on my Watch 5 & OnePlus 8T. Everything is working except it stucks on customizing watch faces. Is this the theming bug on the release notes? any workaround to customize the face?
Thanks!
 

labello29

Senior Member
Aug 7, 2014
622
119
italia
Avoid using Patched Samsung Health because of server connectivity, it will constantly break and you won't have cloud storage and some functionality wouldn't work because of signature check...

My guess is you have a rooted Samsung device, there is a section on the thread on how to use latest Samsung Health and bypass root detection, give it a shot and hopefully it works...
Hello SIR ... I have good news for you, it works Perfectly also Samsung health your job is just amazing 😍😍thank you!! I'm going to give you a little coffee 👍..Then I want to know want thing ' if I can ask you ' I tried to instal via phone connect but the bottom (÷ on Bugjeager app show me differently popup notapk file bud only ) I'm going to show you what Isee..I hope this project will have in the future more development and hopefully working on my future s22ultra thanks for everything again...👍
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Any idea how to make the new battery health check in Samsung members work with non Samsung phones?
    Very unlikely to work without rooting your device and it's a Longshot with rooted device, I attempted to mod and failed, didn't quit yet, just thinking about it from time to time, hopefully a light bulb would shine above my head for an approach lol...

    But at the same time, I'm thinking about making a proper battery details instead of the shallow details of galaxy wearable...
    Hi!
    I have a watch5 pro. No Samsung phone. Does it work with this watch?
    Note: JDK15 no longer works with Tizen studio 5. (Device Manager)
    Do you see any mention of Tizen Studio...?
    Kindly go through the thread, I know you came from Tizen thread, you'd see on Tizen it is mentioned (watch3 and active 2) and you have watch5, and on this thread it's mentioned (watch4, 5 and above), so your watch is supported...

    Just grab a coffee and get in the mood, watch the video, it's super short (I still haven't made written instructions yet since the video is new)...

    And you'll get it working in no time...
    2
    Hello.... Just wondering if there is any way to bypass the recalibration period each 28 days, it is really annoying and will make it useless to have BP on watch while you had to have BP measurement device at home to do recalibration each 28 days, is there any way to ignore recalibration? Or a chance to add such feature to the modded SHM?
    No, just calibrate if you want accurate results, enter dummy values if you want false positive results...

    The whole purpose of calibration is having as accurate as possible results...
    1
    Instructions are on the first page.
    1
    Hey folks!

    Sorry for asking this, but... I don't know if I drop the money on a 5 pro or not without a samsung phone. After this mod does something still doesn't work? What exactly is the "Samsung health without syncing" that is mentioned on the first page?
    Sorry if I missed something... Just wanna make sure I know where I'm going here and what I would still be losing using the watch without a Samsung phone (even after doing this mod).

    Thanks in advance for any input!
    1
    Working now, I had to calibrate BP now it's showing fine. Thanks for the mod
  • 400
    Hello Everyone,
    I hope you all are fine...
    Google_WearOS.png

    ~~~ WearOS WATCHES ONLY ~~~
    20220106_171041.jpg20220106_164719.png
    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country restriction, no device restriction, age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, removed country restriction and lowered age limit from 22 to 16, both apps have additional languages translated by me...
    • BUGS: (BUG from Samsung Watch Update, if you have Lockscreen enabled, Lockscreen is triggered after ECG record, results may or may not be stored, PLEASE REPORT IT TO SAMSUNG)...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...
    • About ECG in SH: ECG has never synced to Samsung Cloud, since the first release of SHM, the ECG tile is missing in Samsung Health with SHM WearOS but rest assured that the ECG tile of Samsung Health has no use other than being a shortcut to open SHM at ECG tab...
    • SHM ChangeLog: see Post #2
    • CRASHING?: few devices crash at application start and few others crash after completing the profile, logs showed each device has a different problem, I'm not considering this as a bug but you can ask me and I'll try to help...
    • FUTURE WORKS: fix theme bugs...
    • NOTE FOR SAMSUNG ROOT USERS: Device encryption will play a big role if you leave it, you most likely will end up with error ERR_INTEGRITY which makes shm refuse to communicate with the watch... the solution would be flashing encryption disabled...

    • IMPORTANT NOTE ABOUT POSTING: Please search the thread and read the F.A.Q first before posting your problem, PROVIDE DETAILS, SCREENSHOT, VIDEOS IF POSSIBLE, DO NOT JUST SAY "IT'S NOT WORKING" OR "IT'S CRASHING", details are important if you want me to help you and to get it fast... SHM MOD WearOS needs to be installed on both watch and phone, if the shm mod is working on the watch and phone but shows no compatible watch found, restart the phone and watch, do not post not working if you installed only one of them or haven't tried restarting both phone and watch...

    If you are confused on XDA, here is a brief view on Github:

    ~~~ For Tizen (Active2 And Watch3), LINK BELOW~~~


    ~~~ SHM MOD F.A.Q ~~~
    First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...

    Ok, now let's begin:

    1. Tizen SHM MOD and WearOS SHM MOD...?
      The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...
    2. Do I need root...?
      No root is required...
    3. Does this void my warranty?
      No it does not void the warrenty or trip the know or damage the watch or the phone...
    4. OTA effect on MOD & MOD effects on OTA.
      No Effects, the MOD is independant...
    5. Do I need to install both phone and watch MODs?
      Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...
    6. Where is the IP Address?
      You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...
    7. Can I do this from my phone?
      Yes, you can use my Geminiman WearOS Manager...
    8. How do I update?
      Just install the updated files I release and it will update, whether you install the phone app or the watch app...
    9. Do I need Samsung Health MOD, is there even such thing...?
      I do not encourge using Samsung Health MOD, Samsung Health is a core application, modding it will break many services, using official Samsung Health is safer and better...
    10. What is BP Sync and is there an ECG Sync...?
      BP or blood pressure data can be saved in Samsung Health Cloud, allowing you to view all of your BP to be seen on Samsung Health app and no, there is no ECG sync and never was, ECG can only be exported as PDF and Excel file...

    ~~~ Pairing issues with Watch4/5 on Galaxy Wearables (Watch4/5 not supported!) ~~~

    Initially it was Huawei devices with Watch4 but this solution works for other devices as well as other Samsung WearOS watches...

    This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance


    You need Galaxy Wearables & Watch4/5 Plugin installed, now do the following steps:
    1. Download Samsung Health.
    2. start Samsung health then go to accessories and search for your watch (scan).
    3. Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
    Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
    It was Explained that you need to have the following apps installed:

    Galaxy Wearable & Watch 4/5 plug-in

    Give all permissions to Galaxy Wearables and the Watch4/5 plugin by going app info, scroll down, permission and grant all...

    Now Clear the data of the following applications:

    • Google Play Services
    • Google Play Framework
    • Google Play Store
    • HwWifiproBqeService (For Huawei devices only, skip if you are not Huawei)
    The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4/5 again through Samsung Health and it should work, after that you can do whatever you want for google...

    One last note, disable any battery optimization, some phones have aggressive optimization, they will kill background services, this will stop the watch4/5 from pairing, if you can't disable it, then whitelist galaxy wearble and the watch4/5 plugin!

    ~~~ WearOS - SHM MOD - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/iS3stNxLV-k

    Just a second friendly reminder 😊 , *inhales deeply*:

    !!!DON'T FORGET TO TURN OFF ADB ON THE WATCH, IT WILL DRAIN YOUR BATTERY!!!

    *ehm* enjoy the SHM MOD now 😆...

    If you see "no compatible watch found" or similar, please restart the watch and phone and try again, it should work...
    REPORTING AN ISSUE WITH SHM MOD: Tell me your device type and Android version, provide me a screenshot or video of where it happened and how, a logcat is appreciated, these details will help me re-create the environment and try to get the issue you have so I can trace it and fix it...

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    I believe the folders describe themselves, the APK at the root is to be installed on your phone...

    ~~~ SHM MOD Companion ~~~
    ~~~ Get updates, Enable BP Sync and Much More ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/QzYjqrgnKU0


    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/-4eetNuHFco

    ~~~ Using latest Samsung Health on Rooted Device ~~~
    Thanks to XDA @73sydney , quoting the solution for bypassing Samsung Health root detection, no more using Samsung Health MOD...

    Samsung Health Security Props

    Removes "sakv2" from ro.security.keystore.keytype to help make Samsung Health run on rooted devices. This doesnt mean its a universal "fix" and works on every device every time, so ymmv....

    Disclaimer: The changes made by this module may have ramifications/consequences beyond what you may be using it for (Samsung Health). I have tested it for several days and havent found any personally, but this doesnt mean they dont exist. You use this at your own risk
    This module:

    • looks for /vendor/build.prop
    • if found, it copies the ro.security.keystore.keytype line (in case not everyone has the same keytypes in the line - i hate using static files, i write modules to use whats on each device) to a new system.prop file in the modules folder
    • removes sakv2 from the line in system.prop (it will remove sakv2 from the line (hopefully) wherever it exists, beginning, end or middle)
    I had planned to test this new "fix" for a while before releasing the module to stop people from manually editing the existing file, as using magisk is preferable as its easily reversible, but once i saw posts on XDA about it, i figured id release this now

    As mentioned above, there may be side effects to this "fix", ymmv

    Note: You still need to make sure you have Samsung Health added to Magisk's Deny List, ideally with Shamiko installed (if using Shamiko dont forget to disable Enforce Deny List)
    Please use the Knox Patch Module:
    Thanks to XDA @BlackMesa123
    You can also find a thread here:
    XDA - Knox Patch

    ~~~ ABOUT THE ORIGINAL SHM ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and later models, alongside having Android version 7.0 and above...

    SHM has device detection, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SHM should Work, otherwise, it wouldn't, SHM checks your GeoLocation, Sim Card, and Device CSC (if no sim or location provided)

    List of Country Codes Alpha-2:
    EU_CSC (Total 35):
    "AT"
    "BE"
    "BG"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GR"
    "HR"
    "HU"
    "IE"
    "IT"
    "LT"
    "LV"
    "NL"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    "LU"
    "MT"
    "GB"
    "CH"
    "IS"
    "NO"
    "LI"
    "TR"
    "RS"
    "CY"
    EU_MNC (Total 29):
    "AT"
    "BE"
    "BG"
    "CH"
    "CZ"
    "DE"
    "DK"
    "EE"
    "ES"
    "FI"
    "FR"
    "GB"
    "GR"
    "HR"
    "HU"
    "IE"
    "IS"
    "IT"
    "LT"
    "LV"
    "NL"
    "NO"
    "PL"
    "PT"
    "RO"
    "SE"
    "SI"
    "SK"
    "CY"
    NON-EU (Total 14):
    "KR"
    "US"
    "BR"
    "CL"
    "AE"
    "ID"
    "HK"
    "RU"
    "SG"
    "AZ"
    "GE"
    "PY"
    "AU"
    "TW"

    SHM will work only if the following is not detected on your Samsung Device:
    Paths:
    "/data/local/"
    "/data/local/bin/"
    "/data/local/xbin/"
    "/sbin/"
    "/su/bin/"
    "/system/bin/"
    "/system/bin/.ext/"
    "/system/bin/failsafe/"
    "/system/sd/xbin/"
    "/system/usr/we-need-root/"
    "/system/xbin/"
    "/system/app/Superuser.apk"
    "/cache"
    "/data"
    "/dev"
    Apps:
    "com.noshufou.android.su"
    "com.noshufou.android.su.elite"
    "eu.chainfire.supersu"
    "com.koushikdutta.superuser"
    "com.thirdparty.superuser"
    "com.yellowes.su"
    "com.devadvance.rootcloak"
    "com.devadvance.rootcloakplus"
    "de.robv.android.xposed.installer"
    "com.saurik.substrate"
    "com.zachspong.temprootremovejb"
    "com.amphoras.hidemyroot"
    "com.amphoras.hidemyrootadfree"
    "com.formyhm.hiderootPremium"
    "com.formyhm.hideroot"
    "com.koushikdutta.rommanager"
    "com.koushikdutta.rommanager.license"
    "com.dimonvideo.luckypatcher"
    "com.chelpus.lackypatch"
    "com.ramdroid.appquarantine"
    "com.ramdroid.appquarantinepro"
    Binary:
    "su"
    "busybox"
    SU:
    "/system/xbin/which"
    "su"
    Test-Keys:
    "test-keys"

    ~~~ Special Thanks ~~~

    Thanks to the amazing people on my Telegram group and Reddit users that reached me, thanks to everyone that tested the MOD and making it happen before I got my watch...

    Thanks to @pavanmaverick he found out about the Tizen sync working for WearOS...
    Big Thanks to XDA @Zacharee1 for decompiling and diving into Samsung Health code to find a way to enable set features on any Samsung Health version, no more downgrading...


    ~~~ Don't forget to ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page ❤️ 😊monthly or one time through PayPal ...


    You can also support me through Google Play by installing:
    And you can Enjoy some Amazing Watchfaces I published
    while you are at it...


    ✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
    ✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
    ✯ Telegram: https://t.me/xda_dante63
    85
    What's New:
    Changelog,
    Latest Changes:

    --- 17th Feb 2023 - Patched SHM MOD, it won't open Bluetooth settings if you tap on pair my watch...
    I have changed the youtube video Tutorial...

    Changelog History Moved to Github:
    51

    PHOTOS HERE ARE OUTDATED, BUT THIS IS JUST TO SHOW YOU THE DIFFERENCE IN LOGO LOOK BETWEEN MOD AND STOCK SHM...

    These are photos from the Telegram group that members have done the tests:​

    photo1629567761.jpegphoto1629567694 (1).jpegphoto1629567694.jpegIMG_20210821_174554-min.jpgIMG_20210821_174703-min.jpg

    The SHM MOD on the WearOS Watch Has an M Heartbeat as a logo to distinguish it from the Original SHM. Also, SHM MOD Widgets on the watch Have a Ring to make it very friendly to the eye...​


    Set Features avaliable on latest Samsung Health:
    Screenshot_20211222-092518_Samsung Health.jpg
    18
    Happy one year anniversary to my SHM MOD, it's been a great journey and joy to help everyone and hopefully for more to come...

    And happy holidays to everyone in advance, stay safe all, god bless you all and Godspeed...

    Regards,
    Dante
    16
    So what's new in SHM 1.1.1.191:
    • New layout BP ISO activity - probably details about BP
    • Canada BP & ECG Support
    • Israel BP & ECG Support
    • Taiwan got BP Support now
    • Ukraine BP & ECG Support
    • Vietnam BP & ECG Support
    • Latin America BP & ECG Support
    • South Africa BP & ECG Support
    • BP Calibration Code changed
    • checkUpdateInterfaceWithLocation method, you will hate this very much, according to the logic of the code, BP & ECG is now enabled and locked based on location, so if you travel, brace yourself for "service not avaliable"
    • About section has isNoneApproveCountry which tells you whether country is approved or not, what's the point of this since the app doesn't run in none supported country you ask...? I have no clue...
    • CSC check sim card on Latin American and Caribbean (SELA)

    And th.. th... th... that's all folks...

    Due to the major changes, here is my plan:
    • Release the MOD without Darkmode in beta test...
    • If all goes well, it goes public and I start working on Darkmode and it goes into beta test...
    • If all goes well too, it goes live...

    I will do this on Weekend where I grab a big cup of coffee and go through Samsung Messy Code, wish me luck lol