You can do anything you want...you are right.. i didnt restarted... it is working now.
I disabled adb on watch again due to battery drain.
So now it will be possible to upgrade firmware on watch or ..
You can do anything you want...you are right.. i didnt restarted... it is working now.
I disabled adb on watch again due to battery drain.
So now it will be possible to upgrade firmware on watch or ..
Thanks for the quick reply. I'll do a full backup before I attempt it just in case.tap the version number many times till it appears...
Hypothetically speaking, shm is designed for Samsung devices, the mod makes it work on all devices, very few devices (rare) face issues in crypto functions (encrypt decrypt) like few Huawei phones, other than those, I think it should work...
For this do rooting of phone required?
Do guarantee of Samsung watch 4 voided?
I have One plus 7t, can this work on it?
Please help.
Where I can find it please help.Literally read the first post, it explains everything.....
Specifically: SHM MOD F.A.Q
There is a recalibration remainder, if you could recalibrate according to that, superb then,Do you have a way to date to bypass the recalibration requirement? I can understand the requirement but Samsung blocking use without recalibration is irksome
You can recalibrate as much as you want,Question regarding the calibration for the BP monitor....
I've got mine all setup and working on my Galaxy Watch 5. I did the initial calibration using my Withing cuff. All good there.
Since first setup, I've read that I wasn't using my Cuff in the best way. I would like to do another round of 3 measurements for calibration and force the watch to participate in that as well -- rather than waiting a month for it to come up again.
Is this possible? Thank you!![]()
Inside the companion app in watch section but I suggest you wait few days because I will patch and change the logic in it...@Dante63 hi God, where is link for SHM MOD WATCH Companion App? i see only link for phone app. thank you.
Inside the companion app in watch section but I suggest you wait few days because I will patch and change the logic in it...
I literally said inside the companion appView attachment 5729669View attachment 5729671View attachment 5729673
sorry i dont see. i am maybe blind.( Btw, very thank you again for this hard work.
oh, now only from phone app. ok. thank you.I literally said inside the companion app
View attachment 5729681
Share a screenshot of the issue pleasehi my watch is Galaxy watch 4 classic my phone is s21 ultra csc SKZ tel it was previously rooted and uninstalled now me I am installing the application, but I am getting the Samsung Health connection cannot be established error, why? my phone android 12 latest version
First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...
Ok, now let's begin:
- Tizen SHM MOD and WearOS SHM MOD...?
The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...- Do I need root...?
No root is required...- Does this void my warranty?
No it does not void the warrenty or trip the know or damage the watch or the phone...- OTA effect on MOD & MOD effects on OTA.
No Effects, the MOD is independant...- Do I need to install both phone and watch MODs?
Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...- Where is the IP Address?
You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...- Can I do this from my phone?
Yes, you can use Bugjeager if you don't like to type commands or Remote ADB Shell if you want to type the commands...- How do I update?
Just install it again and it will update, whether you install the phone app or the watch app...- Do I need Samsung Health MOD, is there even such thing...?
There is no Samsung Health MOD, Samsung Health is a core application, modding it will break many services, using official Samsung Health works fine...
Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
Initially it was Huawei devices but this solution works for other devices as well...
This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance
You need Galaxy Wearables & Watch4 Plugin installed, now do the following steps:
- Download Samsung Health.
- start Samsung health then go to accessories and search for your watch (scan).
- Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
It was Explained that you need to have the following apps installed:
Galaxy Wearable & Watch 4 plug-in
Give all permissions to Galaxy Wearables and the Watch4 plugin by going app info, scroll down, permission and grant all...
Now Clear the data of the following applications:
The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4 again through Samsung Health and it should work, after that you can do whatever you want for google...
- Google Play Services
- Google Play Framework
- Google Play Store
- HwWifiproBqeService (For Huawei devices only, skip if you are not Huawei)
One last note, disable any battery optimization, some phones have aggressive optimization, they will kill background services, this will stop the watch4 from pairing, if you can't disable it, then whitelist galaxy wearble and the watch4 plugin!
Samsung Health Security Props
Removes "sakv2" from ro.security.keystore.keytype to help make Samsung Health run on rooted devices. This doesnt mean its a universal "fix" and works on every device every time, so ymmv....
Disclaimer: The changes made by this module may have ramifications/consequences beyond what you may be using it for (Samsung Health). I have tested it for several days and havent found any personally, but this doesnt mean they dont exist. You use this at your own risk
This module:
I had planned to test this new "fix" for a while before releasing the module to stop people from manually editing the existing file, as using magisk is preferable as its easily reversible, but once i saw posts on XDA about it, i figured id release this now
- looks for /vendor/build.prop
- if found, it copies the ro.security.keystore.keytype line (in case not everyone has the same keytypes in the line - i hate using static files, i write modules to use whats on each device) to a new system.prop file in the modules folder
- removes sakv2 from the line in system.prop (it will remove sakv2 from the line (hopefully) wherever it exists, beginning, end or middle)
As mentioned above, there may be side effects to this "fix", ymmv
Note: You still need to make sure you have Samsung Health added to Magisk's Deny List, ideally with Shamiko installed (if using Shamiko dont forget to disable Enforce Deny List)
pm disable-user --user 0 com.samsung.android.shealthmonitor
and exiting the shell and disconnecting... instructions updated...