I bit the bullet.Yes and GVK7 breaks lockscreen mechanism... haven't heard about GVH1...
GVK1 then GVK6. Seems fine so far
I bit the bullet.Yes and GVK7 breaks lockscreen mechanism... haven't heard about GVH1...
Changelog few posts back
Thank you so muchI have just started looking into phone shm (version 227) and here is what I observed on UI:
* Malaysia & Thailand having BP & ECG enabled...
* Luxembourg & Philippines both having privacy policy and terms of use but nothing obvious about BP or ECG...
* more works on the icon to support shadows and so (and dropping static round icon)...
* polishing to UI code (removing useless elements from elements) and seems BP & ECG ISO have their own container...
* Added 2 Descriptions for BP & ECG (not sure where it will be visible till I patch and make it runnable):
"""Samsung Health Monitor Model Blood Pressure App is a mobile medical application operating on a compatible Samsung Galaxy phone and Samsung Galaxy Watch that can transfer the measurements to the app on the Galaxy phone, allowing the user to view blood pressure data and trends."""
"""Samsung Health Monitor Model ECG App is a mobile medical application operating on a compatible Samsung Galaxy Watch (ECG-Tizen/WearOS) and Samsung Galaxy phone (ECG-Android). This app captures bioelectric signals from the user. It's used to measure ECG, and data can be transferred to the Samsung Galaxy phone, allowing users to store and share PDF data with healthcare professionals."""
* Samsung has an address in Thailand...
* Malaysia language is English, they did not translate the app...
As for the functionality (Code), here is what I observed:
* Message handler that was absent before, failed to sync to watch try again later (I think this is where the layout seems to spinning forever and after a restart, the app connects to the watch)...
* New countries visible in CSCUtil, Macao (MO), Malaysia (MY), Thailand (TH), Philippines (PH), Norfolk Island (NF), Malta (MT), Luxembourg (LU)...
OK so,
NF is checked as isAUModel (Australia)
MO is checked alongsiide HK in a new method called isHongKongRegion (China)
TH has its own method isTHModel
Nothing about the PH or MT or LU but it is possible to say they got partial support if not fully...
what next:
* they are changing font programmatically ("sec-roboto-light")...
* BP and ECG results may look different as I spotted method fromHtml (used to add styling to text, such as color, bold, etc) in a TextView...
* BP History Compare...? worth checking this one out...
* BP is heavily modified (Code gone poof lol and new code replacing it or nothing at all)
* ECG is modified same as BP...
* I don't think there is a significant change in the UI (at least by just looking at the code)...
And that's all...
I don't see any change that is worrying me, so I should be able to apply the latest patch of 221 and it should work fine...
I will try my best to patch and release this version whenever I get the time to work on...
unfortunately, I updated to GVK7 and have since lost the use of ECG. Does anybody have a solution or workaround to get it back or do I just need to wait until Samsung fixes it? I'm on a GW4 BTE.Yes and GVK7 breaks lockscreen mechanism... haven't heard about GVH1...
You either sacrifice payment by turning off lockscreen or wait for Samsung patch...unfortunately, I updated to GVK7 and have since lost the use of ECG. Does anybody have a solution or workaround to get it back or do I just need to wait until Samsung fixes it? I'm on a GW4 BTE.
My best guess is ERR_INTEGRITY, check logs (logcat viewer), see if that shows what I said...İ used Lineage OS. SHM app won't start on phone. I have given all the permissions.
How to fix ?
I think this info is configurable on the website or Samsung account app (Samsung devices i believe)Hey, I installed the mod as per the readme's and everything works great. Apart from one thing. My date of birth in the SH app is set to 1941
I've set my correct date of birth in my Samsung profile, but it's greyed out when I try to edit it in the app.
Is there something that I've missed?
Hello Dante do you know why, or is there any reason why samsung does not provide yet the possibility to natively follow a gpx route in samsung health like in SW 5? Is there any posibility to implement or adapt this for SW4?I think this info is configurable on the website or Samsung account app (Samsung devices i believe)
View attachment 5816177
Thanks, I have changed my date of birth on the Samsung website with this linkI think this info is configurable on the website or Samsung account app (Samsung devices i believe)
To sell watch 5 probably...? I may be wrong because I never used export option, it could be there just somewhere in the app or samsung put conditions for it to appear...Hello Dante do you know why, or is there any reason why samsung does not provide yet the possibility to natively follow a gpx route in samsung health like in SW 5? Is there any posibility to implement or adapt this for SW4?
Try signing out or clear samsung health app data and sign in again, also, keep in mind that samsung account configuration takes time to reflect and be visibleThanks, I have changed my date of birth on the Samsung website with this link
https://account.samsung.com/membership/contents/profile/profile-gate
but my SH app still shows as the incorrect date.
I'm on a Sony Xperia so don't have the Samsung account app
I personally haven't encountered issues with Dante's work and honestly it's been a blessing.Hey guys -- I'm about to do this with my USA un-rooted Samsung Z Fold 4 and Galaxy Watch 4 - both have all the latest updates. I have got frustrated trying to read thru 160 pages of posts -- my only question is are there any known issues that I will encounter? Thanks for the help everyone.
This now seems a permanent issue for me. I cannot get BP to sync w/ SH. I've removed the apps, gone through the entire process from scratch, including the sync method w/ setfeatures, and BP will not sync. Everything else still syncs fine, ie. ECG, Blood Oxygen, Sleep, Steps.I have similar problem before and if you are sure that the setfeatures have not reverted back to their original states and setup correctly, rebooting the watch normally would fix this issue.
The main page is enough, I always try to keep everything (as much as I can) on the main post...Hey guys -- I'm about to do this with my USA un-rooted Samsung Z Fold 4 and Galaxy Watch 4 - both have all the latest updates. I have got frustrated trying to read thru 160 pages of posts -- my only question is are there any known issues that I will encounter? Thanks for the help everyone.
Turn off the sync in shm, delete the folder setfeatures, clear cache and force stop Samsung Health, open it and close it...This now seems a permanent issue for me. I cannot get BP to sync w/ SH. I've removed the apps, gone through the entire process from scratch, including the sync method w/ setfeatures, and BP will not sync. Everything else still syncs fine, ie. ECG, Blood Oxygen, Sleep, Steps.
Safe to update, no Effects on shm modI got a notification for watch software update on galaxy watch 4 classic and it says it has an updated samsung health app is it safe to update or do I need to wait for you to update something first? Thanks for your work
It is done.Hey @mrjuniork could you make this Thread also a Sticky for the forum, because some people post Threads how they can't get the Watch working, but everything has already been setup here, with tutorials etc. everything is working.
So people don't confuse others, and start the same thing over and over again![]()
First I want to say to article authors, thank you for your efforts to publish an article on this, but please do not copy and paste into your article as content may change and please provide link to the thread so people can get help and ask questions...
Ok, now let's begin:
- Tizen SHM MOD and WearOS SHM MOD...?
The watch4 original SHM can't communicate with the phone MOD, and it's not possible to completly remove the original SHM from the watch4, so I had to create WearOS MOD and rename the previous MOD to Tizen MOD...- Do I need root...?
No root is required...- Does this void my warranty?
No it does not void the warrenty or trip the know or damage the watch or the phone...- OTA effect on MOD & MOD effects on OTA.
No Effects, the MOD is independant...- Do I need to install both phone and watch MODs?
Yes, you need both, keep in mind, the apk with word phone is for phone and the watch4 is for the watch...- Where is the IP Address?
You can find it inside the developer options after you enable the ADB Wi-Fi, it takes time though, alternativly, you can go to connections -> wifi -> the wifi you are connected to -> scroll down and you'll find your IP...- Can I do this from my phone?
Yes, you can use my Geminiman WearOS Manager...- How do I update?
Just install the updated files I release and it will update, whether you install the phone app or the watch app...- Do I need Samsung Health MOD, is there even such thing...?
I do not encourge using Samsung Health MOD, Samsung Health is a core application, modding it will break many services, using official Samsung Health is safer and better...- What is BP Sync and is there an ECG Sync...?
BP or blood pressure data can be saved in Samsung Health Cloud, allowing you to view all of your BP to be seen on Samsung Health app and no, there is no ECG sync and never was, ECG can only be exported as PDF and Excel file...
Now here is an update of mine if the above does not work and Galaxy Wearables keeps disconnecting from the watch4
Initially it was Huawei devices with Watch4 but this solution works for other devices as well as other Samsung WearOS watches...
This fix is done by Reddit u/Relative_Comparison2 & u/MelodicMaintenance
You need Galaxy Wearables & Watch4/5 Plugin installed, now do the following steps:
- Download Samsung Health.
- start Samsung health then go to accessories and search for your watch (scan).
- Samsung Health will call Galaxy Wearables to set up the connection and a normal setup is performed.
It was Explained that you need to have the following apps installed:
Galaxy Wearable & Watch 4/5 plug-in
Give all permissions to Galaxy Wearables and the Watch4/5 plugin by going app info, scroll down, permission and grant all...
Now Clear the data of the following applications:
The phone will start acting up, that's normal, so restart your phone to allow system app to rebuild itself, when the phone starts, do not configure your google account yet, first try connecting to the Watch4/5 again through Samsung Health and it should work, after that you can do whatever you want for google...
- Google Play Services
- Google Play Framework
- Google Play Store
- HwWifiproBqeService (For Huawei devices only, skip if you are not Huawei)
One last note, disable any battery optimization, some phones have aggressive optimization, they will kill background services, this will stop the watch4/5 from pairing, if you can't disable it, then whitelist galaxy wearble and the watch4/5 plugin!