ResurrectionRemix ROM 6.1.0 - Official Weeklies- 8.1.0

[alex9yust]

used the latest stable version of miui 9.5.3.0

Do you think I should use the latest developer?

try it.
strange problem with the camera.

 

[amarjeetmalpotra]

I'm a little afraid. therefore two builds. they differ only in the settings for the 2/16 version of the phone. In the second build the settings of the lowmemorykiller are the same like 3/16.
1. https://drive.google.com/open?id=1NCofAzI6FAe46eqw8KHi5AISDXeuyUO-
2. https://drive.google.com/open?id=1MjZHhL82adOvLSxCVpRLuzS3M8Cz48M_

md5sum
8ed9ff9bff9b5e0c7c83d6f6b351368d RR-O-v6.1.0-20180616-kenzo-Official.zip
6f4f3e83046e5bed6e5c515aacfbbf51 RR-O-v6.1.0-20180616-kenzo-Official-v2.zip

I changed the kernel, because I could not fix the work of the time_daemon with the old kernel.
changed kernel settings. maybe it will be better for 2/16.
turn on zram.

I have a 3gb version which one should I try, 1st or 2nd.

Edit: Forgot to Thank You for the new Build Dev.

 

[alex9yust]

I have a 3gb version which one should I try, 1st or 2nd.

for 3GB version is not important

 

[baxtex]

Not sure if HW error for me...

Did a complete clean wipe and flash of 11/06 version. Last night, I left the phone at 100% on the charger, I woke up 8 hours later, phone still charging but battery at 50%! Now I have used it a little and charged it again, charging seem to decrease the battery instead of charging it...

https://imgur.com/a/caYae7N

 

[[email protected]]

Battery Backup

 

[mnbnayeem]

in agni there is still a problem with VPN. kill system.

Can't turn on wifi & hotspot after a clean install also what to do now plz help ..TIA

 

[amarjeetmalpotra]

Battery Backup

Ya Thats Right Latest Build i.e 16/06 (I tried 1st build) is Awesome in terms of Battery as of now.
Kudos to Dev. :good:

 

[alex9yust]

Can't turn on wifi & hotspot after a clean install also what to do now plz help ..TIA

I think you need to flash the last developer Miui through fastboot or MiFlash. see if wi-fi works there. and then flash custom ROM.
What ROM was the last one where wi-fi worked?

 

[Mattiam2]

Everything is fine but..

Everything seems working fine but when I reboot the phone (or turn off and turn on) the fingerprints disappear! I need to add them again! (Goodix sensor)

 

[mnbnayeem]

I think you need to flash the last developer Miui through fastboot or MiFlash. see if wi-fi works there. and then flash custom ROM.
What ROM was the last one where wi-fi worked?

Everything works fine on RR 26/05 build. now no WiFi & can't transfer in bluetooth also.Mac address is 02:00:00:00:00:00. Bluetooth address is 00:00:00:98:16:07. Also I have WCNSS_qcom_wlan_nv.bin file in persist folder.

 

[alex9yust]

Everything seems working fine but when I reboot the phone (or turn off and turn on) the fingerprints disappear! I need to add them again! (Goodix sensor)

I think to do the same as the previous post. to flash last miui through the fastboot.
At me too goodix. I left it instead of fpc. After rebooting, my fingerprints stay in place.
to explain why this is happening to you, need to know what kind of miui you had last, what kind of firmware you were flashed last, whether you flashed epic ports, and maybe more ...

 

[alex9yust]

Everything works fine on RR 26/05 build. now no WiFi & can't transfer in bluetooth also.Mac address is 02:00:00:00:00:00. Bluetooth address is 00:00:00:98:16:07. Also I have WCNSS_qcom_wlan_nv.bin file in persist folder.

ok. Does the persist look like this? did you update until 11/06 or 16/06? I'm now upload a build with selinux = permissive

 

[mnbnayeem]

ok. Does the persist look like this? did you update until 11/06 or 16/06? I'm now upload a build with selinux = permissive

Yes exactly the same. I am in 11/06 build.

 

[Mattiam2]

I think to do the same as the previous post. to flash last miui through the fastboot.
At me too goodix. I left it instead of fpc. After rebooting, my fingerprints stay in place.
to explain why this is happening to you, need to know what kind of miui you had last, what kind of firmware you were flashed last, whether you flashed epic ports, and maybe more ...

Before this I had Miui 9 global stable (released in March), nothing else :S Need I to flash Miui and then flash RR again?

 

[alex9yust]

Before this I had Miui 9 global stable (released in March), nothing else :S Need I to flash Miui and then flash RR again?

try in twrp Wipe->Format Data-yes. Format Data is the button on the bottom right. reboot twrp in twrp.
all files from the internal memory will be lost. you will need to download the ROM and gapps from your computer, for example.
copy the ROM and gapps. wipe system and 2 caches. install ROM and gapps.

 

[alex9yust]

Yes exactly the same. I am in 11/06 build.

https://drive.google.com/open?id=1Z32I2t2ZIT9K094VsEyn03qe0q8hLwEz
try this build. selinux=permissive. (the size is slightly larger because of the vulkan)
and if you can get a log
adb logcat > out_log.txt
and send me out_log.txt

 

[mnbnayeem]

https://drive.google.com/open?id=1Z32I2t2ZIT9K094VsEyn03qe0q8hLwEz
try this build. selinux=permissive. (the size is slightly larger because of the vulkan)
and if you can get a log
adb logcat > out_log.txt
and send me out_log.txt

OK I will try & revert back to you thanks for your response

 

[[email protected]]

Ya Thats Right Latest Build i.e 16/06 (I tried 1st build) is Awesome in terms of Battery as of now.
Kudos to Dev. :good:

It is with Agni 12.9 kernel.

 

[Mattiam2]

try in twrp Wipe->Format Data-yes. Format Data is the button on the bottom right. reboot twrp in twrp.
all files from the internal memory will be lost. you will need to download the ROM and gapps from your computer, for example.
copy the ROM and gapps. wipe system and 2 caches. install ROM and gapps.

I've found out the problem! I don't know why the phone was encrypted (maybe it was that during the first startup the phone asked me if I wanted to hide notifications after reboots before insert the password).
Now I reflashed all and it all works (the question which I've talked about didn't appear anymore), and phone isn't encrypted.
Maybe when the phone is encrypted the figerprints aren't saved correctly? Idk.
Anyway, thanks for the help

P.S. Sorry forma my broken english, I'm italian

 

[amarjeetmalpotra]

It is with Agni 12.9 kernel.

All Stock Here