How To Guide ( Rewrite).Using FastbootD .
- Thread starter tom.android
- Start date
update: 2023-02-23
Download: here
>>View Tab A7 Lite Screen Device on TV.<<
✓- Install as dual boot GSI based on Stock A13.✓- Google Assistant can uses to make a call to someone. (from your contact).
- Want to view tablet's screen via an external display.
-Google Home App.
-VLC ( Video player)
-Smart TV (Chromecast build-in)
✓-You can controls external screen (TV) without unlock your tab.
BATTERY DRAIN FOR MY DUAL BOOT. try to uses as normal boot.
✓-FOD works
✓-Face Unlock works
✓-Auto Screen Brightness ( with custom overlay)
✓-Home Launcher works with set Smallest width 598 dp.
✓-exFAT micro sdcard supported.
》Good nearby share.
Vs ProjectBlaze GSI
Download & Flashing with FastbooD. (vbN VNDKLITE variant GSI)
But you can install GAPPS with Magisk.(Attach)
Two of this GSIs are fast enough for Gamer. The hardest part is setting google assistant to make a call.
Last edited:
View 2 Project Project Elixir Vs. Project Blaze GSI.
( compared them on DSU Dual boot environment)
View Tab A7 Lite Screen Device on TV.
Last edited:
Introduction
This module will make modifications in QS while you use your device in landscape mode. This new QS will be better than ever as you will be able to read and get your notifications on the right side. On the left side you will have your QS Toggles.
Requirements
• Magisk latest stable
Instructions
• Flash in magisk & reboot device
Use this with Project Elixir
Last edited:
How to Activate AOD “only” when Elixir GSI is charging.
Set Alway On Display (AOD) >>Project Elixir GSI
Open Setting > Phh Treble settings > Misc features > Force Allow Always-On display
Reboot
Set QUICK MENU
I'd always set AOD only when charging .
>>>>>>>>>
If your screen brightness too dim. Flash AOSP blur enable.zip with magisk.( Gerneral GSIs )
Last edited:
Not enough space to resize partition solution
***Don't uses this command
"fastboot delete-logical-partition product"
why ?
The product partition, with around 1.3GB in size isn’t even required by the GSIs.
then you can delete data on product partition.
*(Didn't delete product partition itself but deletes only data inside this partition , then android will auto-resize product'spartition.) (for dynamic partions supported device)
Do this.
set the size of the product partition to 0
To verify if the partition size has become 0.
If one of the lines shows the below code, then the process is a success.
---End Info--
But for whom which deleted your Product Partition before following this guide.
( have done "fastboot delete-logical-partition product" ) then just
-Refashing Stock Firmware together with FastbootD.
or
-Create new Logical Product Partion with FastbootD command.
(
-Flash product.img into this partition,
(
)
but i don't have time now for creates this img.
Note: if you don't known fastbootd command. click here.
***Don't uses this command
"fastboot delete-logical-partition product"
why ?
The product partition, with around 1.3GB in size isn’t even required by the GSIs.
then you can delete data on product partition.
*(Didn't delete product partition itself but deletes only data inside this partition , then android will auto-resize product'spartition.) (for dynamic partions supported device)
Do this.
Code:
adb reboot faastboot
Code:
fastboot erase productset the size of the product partition to 0
Code:
fastboot resize-logical-partition product 0x0To verify if the partition size has become 0.
Code:
fastboot getvar allIf one of the lines shows the below code, then the process is a success.
Code:
(bootloader) partition-size:product:0x0---End Info--
But for whom which deleted your Product Partition before following this guide.
( have done "fastboot delete-logical-partition product" ) then just
-Refashing Stock Firmware together with FastbootD.
or
-Create new Logical Product Partion with FastbootD command.
(
Code:
fastboot create-logical-partition product (size)-Flash product.img into this partition,
(
Code:
fastboot flash product product_for_GSI.imgbut i don't have time now for creates this img.
Note: if you don't known fastbootd command. click here.
Last edited:
Install Gapps modules with Magisk. ( For Android 13)
DOWNLOAD: https://litegapps.site/index.htmlCLICK NAME FOR DOWNLOAD
1. [MAGISK]LiteGapps_Nano_arm64_13.0_v2.8_official.zip
2. GoogleSearch_LiteGapps_Addon_arm64_13.0.zip
3. GoogleAssistant_LiteGapps_Addon_arm64_13.0.zip
NOTE: YOU CAN ADD MORE ADD-ON MODULES FROM HERE.
STEP. ( with magisk manager )
Flash 1 and Reboot
Flash 2 and Reboot
Flash 3 and Reboot
RUN GOOGLE APPS and Sign-in
How to configure Google Assistant . ( For make a call )
OPEN SETTING MENU
-Set Default Digital Assistant.
Open Setting and Search with keyword " digital assistant or assistant"
-Configure OK Google.
Open Setting 》Google 》Setting for Google apps 》Search Assistant & Voice 》 Google Assistant 》Hey Google & Voice match
ENABLE Hey Google.
-Changes to uses your language by Setting > Languages & Input
ADD YOUR LANG
-Test ok google
-update Google apps.
From my ProjectBlaze v2.5 GSI.
The only "nearby share" don't works , I will try with Phh AOSP again.
Last edited:
Set
FOR DE-GOOGLE USER.
"WHICH IS BEST FOR?...[many things]"
"BEST" is subjective, depends on device and usage cases
just do clean install and test few days, don't be a lazy - only you can find which is BEST for you
Using LeOS 2.0 TD ( De-google Variant) ( new compiled )
Download:
I
if you are on Stock-based + fastbootD-recovery. then follows
1. Connect your device with USB cable to Computer.
-Start devices and test its connection.
adb devices
2. Reboot tab a7 lite to FastbootD mode
adb reboot fastboot
3. Delete system logically partition
fastboot erase system
4. Write new system (GSI)
fastboot flash system new_gsi_name.IMG
5. Delete old data and coach.
fastboot -w
6.reboot to recovery
7.data factory reset and reboot to system.
You have 2 choice for root environment , phh-su root or root by magisk.
a) uses "phh-su" root further.
- Don't activate hidden magisk
- Don't execute " securize" menu at PHH Setting.
b) use Root by Magisk.
- execute " Securize" command at Phh-Treble Setting menu.( if OK your system will auto reboot.)
- Activate and update hidden Magisk.
1. setup "Display Smallest width = 598 dp.
2. enable default home launcher =LeOS Launcher
3. Disable show Navigation hint pill bar.
4. Hide Dock
5. Desktop>> allow empty pages and hide status bar.
Pre-installed Apps Configuration.
-K9 Mail
-TC
-New Browser
Test Bluetooth
>>Don't configures any at PHH Treble Setting.
Only add Bluetooth device.( default android add Bluetooth)
more..
FOR DE-GOOGLE USER.
"WHICH IS BEST FOR?...[many things]"
"BEST" is subjective, depends on device and usage cases
just do clean install and test few days, don't be a lazy - only you can find which is BEST for you
Using LeOS 2.0 TD ( De-google Variant) ( new compiled )
Download:
I
if you are on Stock-based + fastbootD-recovery. then follows
1. Connect your device with USB cable to Computer.
-Start devices and test its connection.
adb devices
2. Reboot tab a7 lite to FastbootD mode
adb reboot fastboot
3. Delete system logically partition
fastboot erase system
4. Write new system (GSI)
fastboot flash system new_gsi_name.IMG
5. Delete old data and coach.
fastboot -w
6.reboot to recovery
7.data factory reset and reboot to system.
StartUp Process Begin
>>>>>End Installation Info.<<<<<<
After Installation.
After Installation.
You have 2 choice for root environment , phh-su root or root by magisk.
a) uses "phh-su" root further.
- Don't activate hidden magisk
- Don't execute " securize" menu at PHH Setting.
Pic Show "Securize" menu for uninstall "PHH-SU"
b) use Root by Magisk.
- execute " Securize" command at Phh-Treble Setting menu.( if OK your system will auto reboot.)
- Activate and update hidden Magisk.
>>>End Root info
After 1'st System Reboot
MicroG configuration
Configure your location permission
Setup Location Service
MicroG configuration
Configure your location permission
Setup Location Service
>>>End MicroG configured info
Setup NewLauncher
Setup NewLauncher
1. setup "Display Smallest width = 598 dp.
2. enable default home launcher =LeOS Launcher
3. Disable show Navigation hint pill bar.
4. Hide Dock
5. Desktop>> allow empty pages and hide status bar.
>>End setup new LeOS Home Launcher.
Encryption with Standard Android.
>>End Standard Android Encryption info
Encryption with Standard Android.
>>End Standard Android Encryption info
Pre-installed Apps Configuration.
-K9 Mail
-TC
-New Browser
>>End pre-installed Apps info
Test Bluetooth
>>Don't configures any at PHH Treble Setting.
Only add Bluetooth device.( default android add Bluetooth)
more..
Attachments
Last edited:
AncientOS v7.0 GSI A13 ( Now Official GSI )
ANCIENTROM - Browse /gsi/V7.0 at SourceForge.net
oh. very sorry my dsu had showed me that not supported exFAT sdcard. Now I can't installed Nazim's GSIs with SM-T225 except SparkOS GSI.
Last edited:
New Advanced install, setup & configured MicroG , new Launcher in LeOS GSI. very quick
There are some bugs such as backup and restore (not successful, created file but can't remember things at backup state) , lock and unlock desktop ( successful but only 3 apps icon has always came back again , delete another all when I tune lock to be unlock vice vesa ) , auto-Rotation toggle-button usage is not corespondent with inside menu , and the last problem no affect when click "desktop mode menu".
There are some bugs such as backup and restore (not successful, created file but can't remember things at backup state) , lock and unlock desktop ( successful but only 3 apps icon has always came back again , delete another all when I tune lock to be unlock vice vesa ) , auto-Rotation toggle-button usage is not corespondent with inside menu , and the last problem no affect when click "desktop mode menu".
Last edited:
Full Installation of Official Project Elixir A13 GSI.
✓- FastbootD full install.
✓- Auto Screen Brightness Fix
✓- Enable AOD (Alway On Display 2 mode , active when charging or after screen locked.)
✓- Better QS Landscape.
✓- Google Assistant can uses to make a call.
✓- DSU Sideloader. ( Create virtual system and data partition) for testing new GSI.
✓✓ Using migration backup tool to restore data if you want to use new tested GSI to be actual system.
✓- Using Vega Bobo DSU sideloader with Elixir GSI.
✓- Update Elixir without lost data.
etc.,
Note: Elixir not supported quick charge.
<< Above Create on demand.> If someone want it. Please PM me.
Now you already had actual system (Elixir + Magisk + fastbootD). What next ?
YOU can't uses a GSIs lower than you phone or tablet host version. BECUSE your actual vendor doesn't allow it and anti-rollback policy doesn't also.
DOWNLOAD Vega Bobo DSU sideloader for magisk version. And add this module to magisk manager. Reboot. Create working directory in internal storage only.
Download: test GSIs. "PixelExtened GSI" Extract img file to external SD card.
*minimum empty internal storage 》40%
* should setup UserData size as much as you can.
PixelExtended has good UI no error with screen dp , FOD function and supported exFAT micro SD card.
Bluetooth already fixed. Doesn't configure at Phh Treble Setting.
Code:
su -c gsi_tool enable》》》》》》》
NOW. Logical PixelExtened system and data will be kick off. (Start)
>>>Test & install every things you need, update library from Google store etc.
You could backup data when you are in this dsu environment. ( Migrate backup tool ) (if satisfied to new tested GSI)
《《《《 Waiting for Migrate tool completely back up.
Reboot by click restart at dsu notification, for changed back to Elixir system.
》Reboot to fastbootD for delete Elixir system partition.
adb reboot fastboot
fastboot erase system
fastboot flash system PixelExtened.img
fastboot -w
- reboot recovery
- wipe data / Factory reset
- reboot new gsi system.
》Restore Migrate backup data.
Last edited:
PixelExtended v5.5 update-04032023 in Action ( R/W)
》Configure initial Setup.
》Setup internet connection with WIFI
》Reboot
》Magisk icon appear. Set it up and update .
》Auto-Reboot
*》Open Phh Treble Setting > enable only double tap to wake.
*》Flash Auto-Brightness Magisk Module
》Reboot
》Setup any Bluetooth Device normally with Android Setting.
》update the rest from google app store
Note:
After first connected internet.
-Magisk Icon will show up.
-After flash Magisk-Autobrigness Fix , Phh-Treble Setting Menu will disable.
That is essential pre-configuration.
Howto Adjust Icons & Text size.
-Setting > Display & Brightness
Auto Screen Brightness. ( modified UI by Iconify )
Good Bluetooth connectivity.
☆☆ Not supported with DSU sideloader.
∆∆ Founded battery drain , try RO variant.
Same battery drain as R/W .
☆☆☆☆☆ Try to disable digital wellbeing and parental control.
Before
After
(No Smallest width setting.)
Step》Configure initial Setup.
》Setup internet connection with WIFI
》Reboot
》Magisk icon appear. Set it up and update .
》Auto-Reboot
*》Open Phh Treble Setting > enable only double tap to wake.
*》Flash Auto-Brightness Magisk Module
》Reboot
》Setup any Bluetooth Device normally with Android Setting.
》update the rest from google app store
Note:
After first connected internet.
-Magisk Icon will show up.
-After flash Magisk-Autobrigness Fix , Phh-Treble Setting Menu will disable.
That is essential pre-configuration.
Howto Adjust Icons & Text size.
-Setting > Display & Brightness
Auto Screen Brightness. ( modified UI by Iconify )
Good Bluetooth connectivity.
☆☆ Not supported with DSU sideloader.
∆∆ Founded battery drain , try RO variant.
Same battery drain as R/W .
☆☆☆☆☆ Try to disable digital wellbeing and parental control.
Before
After
Last edited:
》PixelExtended v5.5 Unofficial update-04032023 tested already.
》The best Display configuration for SM-T22x ☆☆☆☆☆
-You can adjust Icon & Text any size without error of App Drawer.
(not limit only 598 dp)
✓ Can't uses Google assistant make a call (then no need Full Variant ) ☆
✓ Can't modify system , product partition. (Read only) ☆
Then Recommend Slim Variant.
✓escape from battery drain , Disable all Google apps , Changes from Google WebView to another.
》The best Display configuration for SM-T22x ☆☆☆☆☆
-You can adjust Icon & Text any size without error of App Drawer.
(not limit only 598 dp)
✓ Can't uses Google assistant make a call (then no need Full Variant ) ☆
✓ Can't modify system , product partition. (Read only) ☆
Then Recommend Slim Variant.
✓escape from battery drain , Disable all Google apps , Changes from Google WebView to another.
GIVE ALL SCORE ☆☆☆☆
Last edited:
SafetyNet and Zygisk
1) Enable "Zygisk" option (in Lygisk/Magisk app)
2) Reboot your device
3) Enable "Enforce DenyList" option
4) Go in "Configure DenyList"
5) Tap on the Magnifying Glass button
6) Enable "Show system apps" option then search 'Google Play Services' and tap on it (but NOT on the tick box!) to expand activities
7) Enable both "com.google.android.gms" & "com.google.android.gms.unstable"
8) Restart
9) Clear Google Play Store Data
10) Check SafetyNet (should pass)
11) Open DenyList
12) Check all apps that do not require root privileges
1) Enable "Zygisk" option (in Lygisk/Magisk app)
2) Reboot your device
3) Enable "Enforce DenyList" option
4) Go in "Configure DenyList"
5) Tap on the Magnifying Glass button
6) Enable "Show system apps" option then search 'Google Play Services' and tap on it (but NOT on the tick box!) to expand activities
7) Enable both "com.google.android.gms" & "com.google.android.gms.unstable"
8) Restart
9) Clear Google Play Store Data
10) Check SafetyNet (should pass)
11) Open DenyList
12) Check all apps that do not require root privileges
Last edited:
DE-GooGLed GSI Android 13 For SM-T 22x
LeOS 20 GSI MicroG (Feb 2023) test both on Stock A11 and A13 is built upon LOS but heavily hardened for security and privacy.(Reccommended)
☆☆☆ Must changes Home Launcher.
-Mulch System Web View.
-MULL Browser.
-Magisk Root ( Remove SU by Securize of PHH Treble Setting)
-Auto Screen Brightness Magisk's module.
-Simple Gallery
-Vanilla Music
-Gcam ( https://www.celsoazevedo.com/files/android/google-camera/dev-hasli/)
-K9 Mail
-VLC nightly 3.5.4 ( VLC Cast to SONY TV) - Get rid of Google Chrome Cast
-Face Unlock Magisk 's module.
-Tracker Control. ( Disable when uses with VLC Casting.)
-Supported DSU Sideloader (Vega Bobo)
More..
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
4This step by step tutorial is all about
☆☆☆ FastbootD video tutorial : https://m.youtube.com/playlist?list=PLvggR4skCxYzhB3SXxpSx4LvRzGwx9k45Full round-trip of "GSIs flashing process".
- Step to install Stock ROM with Fastboot ability.(need 3in1.tar)
- Step to flash GSI on top of Stock ROM.
- get rid of SU.which came with "bvS" or "bgS" Variant.(option if you want Magisk)
- Step to update GSI without lost your data include magisk.
- Step to Recovery back to the First Boot with Magisk (hidden).
- <<Additional for PHH AOSP>>
- Add Adaptive Auto-brightness for T225 (magisk module) here
- Add Face Unlock. here
- << Additional for Stock SAM A13 based>>
- Add Restore Samsung Knox features.(had lost from unlocked and root)
- Add Advanced Setup New LeOS
- ADD DUAL BOOT WITH Vega Bobo DSU Sideloader. (SAM Stock A13 Base) Example here:
--info--
Sam did not provided " fastboot mode" for all devices. only "Odin flashing tool".
What is the FasdtbootD?
*Limitation of FastbootDWhat is FastbootD? How to Boot to FastbootD Mode
In this tutorial, we will explain you what is...
www.droidwin.com
FastbootD not the same as regular "fastboot", impossible to use fastbootd without " Dynamic partition. etc., dynamic partitions are automatically created, resized, or deleted as needed.
*FastbootD has access in logical partition like Super Partition.
( have odm +product+vendor+system partition inside) , Because dynamic partitions are implemented in userspace, partitions needed by the bootloader can't be made dynamic. For example, boot, dtbo, and vbmeta are read by the bootloader, and so must remain as physical partitions.
then
You can't uses by fastbootD performed
Code:fastboot --disable-verity flash vbmata vbmeta.img
✓ Not enough space to resize partition solution
Solution:
Removing stock system_ext and/or product from fastbootd is enough, like so:
***Don't uses this command
"fastboot delete-logical-partition product"
why ?
the product partition, with around 1.3GB in size isn’t even required by the GSIs.
then you can delete data on product partition.
*(Didn't delete product partition itself but deletes only data inside this partition , then android will auto-resize product'spartition.)
Do this.
Code:adb reboot fastboot
Code:fastboot erase product
set the size of the product partition to 0
Code:fastboot resize-logical-partition product 0x0
To verify if the partition size has become 0.
Code:fastboot getvar all
If one of the lines shows the below code, then the process is a success.
Code:(bootloader) partition-size:product:0x0
or
>fastboot erase system_ext
>fastboot resize-logical-partition system_ext 0x0
---End Info--
Resource:
Basic knownledge.
my customAP tutorial.
** When using FastbootD you should knows
Set of fastbootd command.
-content-
Flashing Any GSIsUsing Fastboot without CustomAP 》Save your time.Example_use AOSP A13 from phhusson TrebleDroid GSI.Requirement:
Complete Cycle From Fastboot Flashing >>>ROOT (Magisk,SU)>>Customized UI >>Update without Lost Data and Magisk.
-Unlocked BootLoader
-(Recommend) Stock Firmware Update to A13 such as
"SM-T225XXU1CWA2" etc.,
Why? Used Android 13 GSIs.
1. MTP works
2. Offline Charging works
3. Google Assistant can call for you. (Ok Google call xxx) Stock A13 didn't do it.
etc.,
>Step to install Stock ROM together with Fastboot ability at the same time.
(clean install with stock firmware)
- Extract AP Framework File for "recovery.img.lz4" and patch to add FastbootD ability. [ Download Attach file ] or patch by yourself here https://github.com/Johx22/Patch-Recovery.
- Flash Stock Framework File with odin. (AP , BL, CP, CSC_not_home) + Magisk patch-boot & vbmeta & patch-recovery at (USERDATA Slot) ( include 3 patch-files to one tar file) [ Download Attach file ] -After reboot must connects internet and set "Developer options = enable OEM unlocking + USB debugging"
- (Computer) Download and extract Platform tools to C:\ https://developer.android.com/studio/releases/platform-tools.
- (Computer) Download and install Fastboot interface Driver. https://www.droidwin.com/how-to-install-fastboot-drivers-in-windows-11/
1.you can dirty flash patched fastbootD-recovery at AP slot. When you had any firmware or gsi installed.
2.Howto magisk-patch (boot.img.lz4 + vbmeta.img.lz4). in General Section.
>Step to flash GSI on top of Stock ROMSelect "Enter recovery menu"
Set of Command to install GSIs on top of Stock Firmware.
-Connect device with USB cable to Computer.
-Download your GSIs.
-Extract "GSI.img file into platform tools directory.
-open CMD inside the platform-tools folder and then type in the below command
** Check device was already connected with computer.
*** Check bootloader version (patched) is the same as your device's firmware.
0.
Code:adb devices
1.-Device will turn display into FastbootD modeCode:adb reboot fastboot
2.option: if you founded ‘Not enough space to resize partition’) error.Code:fastboot erase system
3.Code:fastboot delete-logical-partition product4. FastootD (pic below)Code:fastboot flash system gsi-filename.img
5.Recovery (pic below)
Select "wipe data/factory reset" menu
6. Recovery (pic above)
Select "reboot system now" menu
>>Finished " Flashing with FastbootD"<<
After installation.
- This variant was included with " PHH-SU".
>Step get rid of SU.(option if you want Magisk) (bvS or bgS variant)
adb shell Enter
su Enter
chmod +x /system/bin/phh-securize.sh Enter
/system/bin/phh-securize.sh Enter
* Device will auto reboot.
After this Magisk icon will show up.
Click Magisk icon to continue setup additional files and reboot.
-----------------------------------------------------------------
*Step to update GSI without lost your data include magisk.
*** (Recommended: use Magisk-Gapps, if you don't want to re-process install gapps again.)
- Disable all magisk modules. (if you used another Launcher or Port it from another GSI , pleases uninstall it first.)
- Flash New-Update-GSI with FastbootD
Code:fastboot flash system new-gsi.IMG
then REBOOT System (No factory reset or wipe data)
Code:fastboot reboot
After get rid of SU , magisk will show up.
get rid of SU
Code:adb shellCode:suCode:chmod +x /system/bin/phh-securize.shNote: After this magisk will works again. (with all modules you had installed .)Code:/system/bin/phh-securize.sh
>Step to Recovery back toThe First Boot with Magisk (hidden installed).
===End of Update Version info===
Scripts by phhusson to automatically build/CI/Release TrebleDroid GSI
more than 2 times per month
Then I write this easy additional way to update without lost your data..
1.Run Factory Reset From Recovery by press and hold (Power+ Vol down)
2. Connect internet and enable Developer options.
3. Enable OEM unlocking & USB debugging.
4. Reboot after that Magisk setting icon will show up again.
General Section
--End update--
Happy Chinese New Year!
** Compared 2 projects
** Restore Samsung Knox features.
✓ How to create Magisk patch for boot.img + vbmeta.img
- extract (vbmeta.img.lz4 + boot.img.lz4) from your AP Stock
- create compress one file xxx .tar with 7zip
- move (vbmeta.img.lz4 + boot.img.lz4).tar (xxx.tar) to tab a7 lite
- install magisk.apk on you tab a7 lite
- patch the tar file. (with magisk manager)
- result magisk-patch file at Tab a7 :-Download folder.
How to Install Fastboot Drivers in Windows 11
In this comprehensive tutorial, we will show...
www.droidwin.com
✓ [Add pre-patch-recovery-FastbootD]
*** S2 = can't downgrade (Android version) even firmware version.
SM-T220 A13 SM-T225 A13 SM-T 227U A13 SM-T 225N A13 T220XXS2CWA7 T225XXS2CWA8 T227UVLU3CVLA T225NKOU1CWA3 T220XXU1CWA2 T225XXS2CWA6 T220XXU1CWA1 T225XXU1CWA2 T220XXU1CVL7 T225XXU1CVL6 T220XXU1CVL5 T225XXU1CVL5 T220XXS2CWA8 T225XXU2CWB3
✓ Howto install "adb &fastboot" on PC
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing...developer.samsung.com
You should also replace your adb with the latest binaries by Google.
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for...
developer.android.com
Download the platform tools for windows zip file. Find out where your current adb.exe file is located. Extract the zip into that location, overwrite the old file(s).
Note: Don't delete any files from platform-tools
>>>>>>>>>>>>>>
√ Download:
Where are New AOSP A13 official?
Note: (Read/Write System should uses variant "vndklite".)Releases · TrebleDroid/treble_experimentations
Scripts to automatically build/CI/Release...
github.com
✓Changes PHH-SU to Magisk.
- Connect device with your computer. run below command.
May be didn't found phh-securize.sh only uses root file manager deleted "/system/xbin/su"Code:adb shell Enter su Enter chmod +x /system/bin/phh-securize.sh Enter /system/bin/phh-securize.sh Enter
√ You can install "GAPPS" by adb shell or by Magisk-Gapps module.
(Cause we didn't have TWRP, but don't worry about TWRP.)
*install Bromite Systemwebview
*Vega Bobo DSU Sideloader (Root mode with magisk)
*this firmware can't downgrade.**S2**
T225XXS2CWA6 , it will no longer be possible to roll back even to the previous firmware .
( A13"SM-T225XXU1CWA2)
* Add some T220 FastbootD -Recovery-patch2
SparkOS 13.5.5
Detail here
- Retuned the ui of the ls affordance icons
- Reworked the app lock implementation
- Added support for desktop mode
- Retuned seekbar design
- Made night light transition more gradual
- Improved the ripple animation
- Improved some ui animations
- Updated oos clear all button design
- Addressed some lags and issues that were caused of SparkSystemManager
- Reworked Parallel space
- Added support for toggling gms
- Reworked edge haptics
- Added support for clo boost fwk
- Updated the colors and functionality of work profiles
- Reworked the power menu implementation and added support for power Menu Styles
- Merged crowdin translation updates
- Updated SparkThemedIcons
- Updated the lock app feature
- Added support to set hotseat opacity in launcher
- Reworked the recents ui style
- More under the hood changes aimed to improve battery life and performance
The interesting new feature is support desktop mode and toggling GMS.
Waitting for GSI.
1Reserved:
Option tools for customize your AOSP GSI.
Install Gapps modules with Magisk. ( For Android 13)
DOWNLOAD: https://litegapps.site/index.html
CLICK NAME FOR DOWNLOAD
1. [MAGISK]LiteGapps_Nano_arm64_13.0_v2.8_official.zip (Base)
2. GoogleSearch_LiteGapps_Addon_arm64_13.0.zip. (add-on)
3. GoogleAssistant_LiteGapps_Addon_arm64_13.0.zip. (add-on)
Note: you can add add-on mod from here.
STEP. ( with magisk manager )
Flash 1 and Reboot
Flash 2 and Reboot
Flash 3 and Reboot
How to configure Google Assistant . ( For make a call )
-Set Default Digital Assistant.
Open Setting and Search with keyword " digital assistant or assistant"
-Configure OK Google.
Open Setting 》Google 》Setting for Google apps 》Search Assistant & Voice 》 Google Assistant 》Hey Google & Voice match
ENABLE Hey Google.1
1. install root explorer app. (such as Mixplorer)
2. create directory "gapps" or anyname at /data
such as /data/gapps
3. extract archrive " TitaTheGapps.zip" to dir from 2
4. open terminal adb shell ----then su then
cd /data/gapps/tita
chmod +x ./installer.sh
5. add more space for new gapps by delete some unuseful from "/system/system_ext/apex"
Del "android.vndk.v.28,29,30,32 keep only v31
6. run script---> sh ./installer.sh
note you can use command "mount -o rw,remount /system" or used root explorer do it. (changes RO to RW) before mod system.1
Here is what I did to install GApps on AOSP A13:
Get TheGappsInstaller-Tita archive here: https://github.com/ChonDoit/TheGappsInstaller/releases/tag/Tita (specifically: TitaTheGapps_Terminal_20221225.tar.xz)
Extract the tar archive from the tar.xz file
Follow instructions below (credits: ozmage)
adb push TitaTheGapps_Terminal_20221225.tar /sdcard/Download
adb root
adb shell
cd /data
mkdir GAPPS
mv /sdcard/Download/TitaTheGapps_Terminal_20221225.tar GAPPS
cd GAPPS
tar xvpf TitaTheGapps_Terminal_20221225.tar
cd TitaTheGapps_Terminal_20221225
chmod a+x ./installer.sh
sh ./installer.sh
