Do you have Crashguard or SolidSuit? If you have the last one, can you provide some pictures? I received mine but can not pick it up for the moment. Waited 2 two days since shipping (France).
Rhinoshield for Oneplus 6 !
- Thread starter Faridgh98
- Start date
Hey guys,
I just received today my white protection case (not the bumper) and my tempered glass protection from Rhinoshield !
I like the case even tho the phone gained quite a lot of weight because of that, gotta check now how the phone deals with the heat.
But on the other hand, I'm a lot disappointed with the tempered glass. I have about 1-2mm on each side of the screen that are blinded by the black edge... If it was only one side I'd think that I don't know how to set the screen, but both sides show that the screen protection isn't large enough for the OP6 screen !
I reaaaally don't know what to do because I'm really noticing it, and I'm pretty sure I cannot ask for refund because of that
I just received today my white protection case (not the bumper) and my tempered glass protection from Rhinoshield !
I like the case even tho the phone gained quite a lot of weight because of that, gotta check now how the phone deals with the heat.
But on the other hand, I'm a lot disappointed with the tempered glass. I have about 1-2mm on each side of the screen that are blinded by the black edge... If it was only one side I'd think that I don't know how to set the screen, but both sides show that the screen protection isn't large enough for the OP6 screen !
I reaaaally don't know what to do because I'm really noticing it, and I'm pretty sure I cannot ask for refund because of that
G
GuestK00353
Guest
Hey mate, ordered on the 16th got it yesterday so not to long which was the good part lol Yea it trashed my dbrand skin at corners which was the only tight parts of the case which sucked but at the same time I then took the skin off to see thinking it was making it too bulky and thats where I got pissed more with the buttons not lining up right and just not tight at all on either side for the volume button toggle to hold the devices one proper at all so when I moved it the case button slid up and down but device button didnt. Yea crashgaurd, just awful and Im gutted because I expected it to be awesome after reading up on it. I guess some are paid to say good things about products lmao
---------- Post added at 20:58 ---------- Previous post was at 20:55 ----------
Yea I also got the screen protector and it sucked, I knew it wouldnt fill the whole screen but it was a joke. There where huge gaps down each side plus top and bottom. I put my Spigen case on to test how much gap with a case and even still it was massive spaces. Won't go near this brand again after this and their rubbish crashgaurd case.
To say the least I ****ed both in the bin, wouldnt waste my time with them :laugh:
Last edited:
I have the crashguard on my OP5. It's survived multiple drops (damage to the crashguard is visible, none to the phone). The sides are "loose", and I use quotes for a reason, but that crashguard is second to none if you don't want a full case. That being said, as soon as I get off this deployment I'm getting one for my OP6.
Anyone complaining let me ask you this: has your crashguard come off in your pocket and has it survived a drop from average pocket height with no damage to the phone? If so, how can you complain for a product that costs less than a tenth the price of your phone?
Anyone complaining let me ask you this: has your crashguard come off in your pocket and has it survived a drop from average pocket height with no damage to the phone? If so, how can you complain for a product that costs less than a tenth the price of your phone?
I agree that it survives drops really well.
And the loose part I have also experience it with my Galaxy S7.
For those who really want to know what "Loose" really means. Just a slight wiggle if u apply some force within the case.
For the ones your saying *complaining* to which none have actually went against how well it holds from dropping so dunno where you seen these comments and jumped at lol
but more down the path of buttons not lining up because of how loose the sides are to which you agree anyway and one thing that when you pay *less than a tenth* of your phone should in fact work. You do realise they are one of the more expensive brands about therefore should at least be able to do what other cheaper brands do.Recieved my crashguard bumber yesterday for white op6 and after trying 5 different cases, I found this to be the best in comfort and hopefully for protection too.
- Fits very well around the phone - not loose in my case, but has hairline gaps (0.2-0.3 mm) between the phone and case on the back side next to power and volume buttons. Wouldnt notice it if phone and case were black!
- The plastic is a bit slippery as compared to TPU/Silicone but not more than a smooth leather case (i've got KeziHome). It becomes an issue if holding phone by only few fingers in one hand in cooler weather.
- The size is largest among all my other cases (about extra 3mm on all sides - so effectively makes the phone 6mm wider and taller)
- It is lightweight (only 14gm - in comparison the free OP tpu case with phone is about 20gm and OP red silicone case is 27gm).
- The best part is to be able to feel and look at georgous pearly white back of the phone.
- Fits very well around the phone - not loose in my case, but has hairline gaps (0.2-0.3 mm) between the phone and case on the back side next to power and volume buttons. Wouldnt notice it if phone and case were black!
- The plastic is a bit slippery as compared to TPU/Silicone but not more than a smooth leather case (i've got KeziHome). It becomes an issue if holding phone by only few fingers in one hand in cooler weather.
- The size is largest among all my other cases (about extra 3mm on all sides - so effectively makes the phone 6mm wider and taller)
- It is lightweight (only 14gm - in comparison the free OP tpu case with phone is about 20gm and OP red silicone case is 27gm).
- The best part is to be able to feel and look at georgous pearly white back of the phone.
I can confirm that crashguard is complete waste of money. Case is sturdy and fits tightly around corners, however that isn't the case around buttons, which are basically unusable, long pressing power button is almost impossible. Highly recommend to avoid crash guard.
Here's some photos of my black rhinoshield crashguard case
Attachments
Maybe they have production problems atm. Absolutely no problems long pressing power. The volume buttons are a little bit hard to press, but that's it.
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
Not mine but of interest:
Youtube unboxing review of the carbon solidsuit for OP6
https://www.youtube.com/watch?v=Qdo8FBL-s9g
Youtube unboxing review of the carbon solidsuit for OP6
https://www.youtube.com/watch?v=Qdo8FBL-s9g
Last edited:
Yes kinda loose for my liking but am keeping it because I want a bumper to show off my red OnePlus beauty
Same here, really disappointed with the tempered glass. It's such a distraction after it's on. I re-applied it about 3 times to try and get the alignment just perfect and it's still interfering with the notch, top, and side of the screen viewing area. I'm going to reach out to them and see what happens. I'll keep you posted.
Hi I'm thinking of getting the crash guard. I would like to know if other brand's tempered glass screen protectors are compatible with it especially the ozrly tgsp. If anyone has successfully paired any TGSP with the Rhinoshield crash guard, a heads up will be really appreciated. Thanks!
No problem with any TGSP i guess. Atm an Omoton one is applied on my device. It's exactly as big as the Orzly, but with smaller black borders. You shouldn't have issues.
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
---------- Post added at 04:38 PM ---------- Previous post was at 04:36 PM ----------
Definitly not acceptable for the price they offer it for. I hope they'll refund you!
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
Has anyone tried:
https://www.sgfreshidea.com/oneplus-6-invisshield-proplus-tempered-glass-screen-protector.html
or
https://www.sgfreshidea.com/oneplus-6-invisshield-full-adhesive-tempered-glass.html
For case compatibility with Rhinoshield Crashguard ?
https://www.sgfreshidea.com/oneplus-6-invisshield-proplus-tempered-glass-screen-protector.html
or
https://www.sgfreshidea.com/oneplus-6-invisshield-full-adhesive-tempered-glass.html
For case compatibility with Rhinoshield Crashguard ?
Black Solid Suit
Today my solidsuit has arrived
Here some pics
cant post link sorry
imgur.com/a/0oUluI3
Today my solidsuit has arrived
Here some pics
cant post link sorry
imgur.com/a/0oUluI3
Last edited:
I had crashguard on with the oneolus tgsp and it fit fine. But my crashguard had a gap at bottom of case at the front. I'm not comfortable with that and stuff getting in and damage the red aluminum so I'm returning it and sticking with my nylon case for now
http://imgur.com/a/fPA66by
Last edited:
Anybody in india have ordered it? Mine is stuck in Kolkata from 16th August! Dono wt* is going on
Sent from my ONEPLUS A6000 using Tapatalk
Sent from my ONEPLUS A6000 using Tapatalk
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone