[ROM][03/10][4.4.4][HOVER]Paranoid Android 4.6 BETA 3 {AOSPA} Unofficial

Search This thread

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai


» Installation:
CWM:-
If you are on JellyBean ROM then :-
  1. Download ROM
  2. Download Gapps
  3. Select the Reboot into recovery option
  4. Format System (under Mounts and Storage section)
  5. Wipe data/Factory reset
  6. Flash ROM
  7. Flash Google Apps (Gapps)
  8. Reboot
If you are on any other Kitkat ROM then,
  1. Download ROM
  2. Download Gapps
  3. Reboot into recovery
  4. Format System (under Mounts and Storage section)
  5. Wipe data/Factory reset
  6. Flash ROM
  7. Flash Google Apps (Gapps)
  8. Reboot
If updating then,
  • Download NEW ROM
  • Download NEW Gapps (If updated)
  • Reboot into recovery
  • Wipe Cache
  • Wipe Dalvik Cache
  • Flash ROM
  • Flash Google Apps (Gapps) (I recommend doing this because AOSPA Gapps are regularly updated.)
  • Reboot
NOTE:- If u face problems like apps crashing and various force-stops after updating by the above method then I would recommend clean install mentioned just above the UPDATING STEPS.

Paranoid Android Official Changelog:- http://forum.xda-developers.com/showthread.php?t=2583582

S Advance Changelog:-

Code:
16/07/14
[LIST]
[*]4.8 Toolchains 
[*]Device tree updated
[*]Kernel updated.
[*]Squashed some bugs by AOSPA
[/LIST]

[LIST]
[*]Device Changelog:
[*]Device tree updated
[*]Kernel updated.
[*]Squashed some bugs by AOSPA
[/LIST]
10/07/14
[LIST]
[*]Kernel Updated
[*]U8500 Hardware sources updated.
[*]Experimental Commit to adjust the size of clock in status bar, to avoid half visible icons. (Need feedback for the same)
[*]Legacy Parts added in all AOSPA-Legacy ROMs.
[/LIST]
02/07/14
[LIST]
[*]Fix Documents UI crashing
[*]Full battery meter theming from CM
[*]Other upstream theme engine fixes
[*]Translations updated
[*]Other miscellaneous bugfixes
[/LIST]
26/06/14
[LIST]
[*]SD Card issue fixed
[*]Camera Fixed.
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device u8500 tree updated.
[*]AOSPA Source updated.
[*]HOVER fixes.
[/LIST]
18/06/14
[LIST]
[*]FINALLY OTA ADDED. :D 
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device u8500 tree updated.
[*]AOSPA Source updated.
[*]HOVER fixes.
[/LIST]
13/06/14
[LIST]
[*]Camera fixed.
[*]Torch Fixed. (Issues in earlier build)
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device tree updated.
[*]AOSPA Source updated.
[*]HOVER added.
[/LIST]
08/06/14
[LIST]
[*]Android version 4.4.3
[*]Camera fixed. (Was a 4.4.3 Issue)
[*]Bluetooth fixed. 
[*]i9070 Device tree updated.
[*]Updated Kernel. - 3.0.101
[*]Updated common device tree- u8500
[/LIST]
05/06/14
[LIST]
[*]AOSPA Source updated
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[/LIST]30/05/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]AOSPA Source updated
[/LIST]
22/05/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]Many features added
[*]Minor Bug fixes
[*]Battery Optimized
[*]AOSPA Source updated
[/LIST]
03/04/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]Many Bug fixes
[*]Battery Optimized
[*]AOSPA Source updated
[/LIST]
05/03/14
[LIST]
[*]PA Version updated. Now it is 4.1 :D
[*]Experimental Wifi Fix
[*]PA source code updated
[/LIST]
23/02/14[LIST]
[*]Recovery works
[*]Root works
[*]PA source code updated
[/LIST]
09/02/14[LIST]
[*]OMX FIXED
[*]Camera Works
[*]PA source code updated
[/LIST]25/01/14
[LIST]
[*]AOSPA source updated
[/LIST]
Note:- 
[LIST]
[*]NO OMX 
[*]No HALO
[/LIST]
17/01/14[LIST]
[*]AOSPA Source updated
[/LIST] 
01/01/14[LIST]
[*]Initial Release
[/LIST]

XDA:DevDB Information
Paranoid Android {AOSPA} 4.6 , ROM for the Samsung Galaxy S Advance I9070

Contributors
Chirag_Galani
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1.2 JellyBean

Version Information
Status: Stable

Created 2014-01-01
Last Updated 2014-10-03
 
Last edited:

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai
Download links:-
ROM:-
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=8918&task=get

PA Gapps:- http://forum.xda-developers.com/showthread.php?t=2397942

Add Ons:
Official AOSPA Boot Animation : http://forum.xda-developers.com/devdb/project/dl/?id=7196
Place it in /system/media


Older versions:-

1st Boot takes time to boot 5-10 mins

Screenshots:-
 
Last edited:

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai
credits

Credits ->
@ ParanoidAndroid Team for this ROM
@ Team Canjica
@frapeti for helping me.
@KINGbabasula for helpeing me
@shut_down for supporting me
@Koulis2000 for supporting me
@joehanh88 for supporting me
@mykimouse for helping me
@diego-ch for debugging a severe error.
***DISCLAIMER***
I CLAIM NO RESPONSIBILITY FOR ANY DAMAGES THAT MAY OCCUR​
 
Last edited:

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai
Good work... but A lot of bugs,

Ya this ROM is still in Alpha Stage

good work but u can use Macław-Team cm11 as base so we will not have bugs

That's against the spirit of Open Source nature of Android.

This ROM is compiled from sources, and we don't have Maclaw sources/patches. Using the libraries from another ROM, mixing up Canjica's source based components/libraries with Maclaws's makes this not fully "clean" (not for "Original Android Development")

Inviato dal mio GT-I9070

Thanks man.
 

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai
so i can flash it on CM11 based roms ?
UKF wont work on CM11 roms , it says unsupported device .
and i tried with stock , i go back to stock and use UKF . same result .

I am planning to update very soon and if not then too I'll flash rom as per the instructions and report back tomorrow

Sent from my GT-P3100 using Tapatalk
 

Chirag_Galani

Senior Member
Dec 7, 2012
1,303
3,219
Mumbai
so i can flash it on CM11 based roms ?
UKF wont work on CM11 roms , it says unsupported device .
and i tried with stock , i go back to stock and use UKF . same result .

As i told u, the rom boots u didn't follow the procedure.. -_-
Uploading screenshot as a proof in 5 mins
y2e9aqa6.jpg
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 49


    » Installation:
    CWM:-
    If you are on JellyBean ROM then :-
    1. Download ROM
    2. Download Gapps
    3. Select the Reboot into recovery option
    4. Format System (under Mounts and Storage section)
    5. Wipe data/Factory reset
    6. Flash ROM
    7. Flash Google Apps (Gapps)
    8. Reboot
    If you are on any other Kitkat ROM then,
    1. Download ROM
    2. Download Gapps
    3. Reboot into recovery
    4. Format System (under Mounts and Storage section)
    5. Wipe data/Factory reset
    6. Flash ROM
    7. Flash Google Apps (Gapps)
    8. Reboot
    If updating then,
    • Download NEW ROM
    • Download NEW Gapps (If updated)
    • Reboot into recovery
    • Wipe Cache
    • Wipe Dalvik Cache
    • Flash ROM
    • Flash Google Apps (Gapps) (I recommend doing this because AOSPA Gapps are regularly updated.)
    • Reboot
    NOTE:- If u face problems like apps crashing and various force-stops after updating by the above method then I would recommend clean install mentioned just above the UPDATING STEPS.

    Paranoid Android Official Changelog:- http://forum.xda-developers.com/showthread.php?t=2583582

    S Advance Changelog:-

    Code:
    16/07/14
    [LIST]
    [*]4.8 Toolchains 
    [*]Device tree updated
    [*]Kernel updated.
    [*]Squashed some bugs by AOSPA
    [/LIST]
    
    [LIST]
    [*]Device Changelog:
    [*]Device tree updated
    [*]Kernel updated.
    [*]Squashed some bugs by AOSPA
    [/LIST]
    10/07/14
    [LIST]
    [*]Kernel Updated
    [*]U8500 Hardware sources updated.
    [*]Experimental Commit to adjust the size of clock in status bar, to avoid half visible icons. (Need feedback for the same)
    [*]Legacy Parts added in all AOSPA-Legacy ROMs.
    [/LIST]
    02/07/14
    [LIST]
    [*]Fix Documents UI crashing
    [*]Full battery meter theming from CM
    [*]Other upstream theme engine fixes
    [*]Translations updated
    [*]Other miscellaneous bugfixes
    [/LIST]
    26/06/14
    [LIST]
    [*]SD Card issue fixed
    [*]Camera Fixed.
    [*]Janice Device Tree updated.
    [*]Kernel updated. (3.0.101)
    [*]Common Device u8500 tree updated.
    [*]AOSPA Source updated.
    [*]HOVER fixes.
    [/LIST]
    18/06/14
    [LIST]
    [*]FINALLY OTA ADDED. :D 
    [*]Janice Device Tree updated.
    [*]Kernel updated. (3.0.101)
    [*]Common Device u8500 tree updated.
    [*]AOSPA Source updated.
    [*]HOVER fixes.
    [/LIST]
    13/06/14
    [LIST]
    [*]Camera fixed.
    [*]Torch Fixed. (Issues in earlier build)
    [*]Janice Device Tree updated.
    [*]Kernel updated. (3.0.101)
    [*]Common Device tree updated.
    [*]AOSPA Source updated.
    [*]HOVER added.
    [/LIST]
    08/06/14
    [LIST]
    [*]Android version 4.4.3
    [*]Camera fixed. (Was a 4.4.3 Issue)
    [*]Bluetooth fixed. 
    [*]i9070 Device tree updated.
    [*]Updated Kernel. - 3.0.101
    [*]Updated common device tree- u8500
    [/LIST]
    05/06/14
    [LIST]
    [*]AOSPA Source updated
    [*]Janice Device tree updated
    [*]u8500 Device tree updated
    [*]Kernel updated
    [/LIST]30/05/14
    [LIST]
    [*]Janice Device tree updated
    [*]u8500 Device tree updated
    [*]Kernel updated
    [*]AOSPA Source updated
    [/LIST]
    22/05/14
    [LIST]
    [*]Janice Device tree updated
    [*]u8500 Device tree updated
    [*]Kernel updated
    [*]Many features added
    [*]Minor Bug fixes
    [*]Battery Optimized
    [*]AOSPA Source updated
    [/LIST]
    03/04/14
    [LIST]
    [*]Janice Device tree updated
    [*]u8500 Device tree updated
    [*]Kernel updated
    [*]Many Bug fixes
    [*]Battery Optimized
    [*]AOSPA Source updated
    [/LIST]
    05/03/14
    [LIST]
    [*]PA Version updated. Now it is 4.1 :D
    [*]Experimental Wifi Fix
    [*]PA source code updated
    [/LIST]
    23/02/14[LIST]
    [*]Recovery works
    [*]Root works
    [*]PA source code updated
    [/LIST]
    09/02/14[LIST]
    [*]OMX FIXED
    [*]Camera Works
    [*]PA source code updated
    [/LIST]25/01/14
    [LIST]
    [*]AOSPA source updated
    [/LIST]
    Note:- 
    [LIST]
    [*]NO OMX 
    [*]No HALO
    [/LIST]
    17/01/14[LIST]
    [*]AOSPA Source updated
    [/LIST] 
    01/01/14[LIST]
    [*]Initial Release
    [/LIST]

    XDA:DevDB Information
    Paranoid Android {AOSPA} 4.6 , ROM for the Samsung Galaxy S Advance I9070

    Contributors
    Chirag_Galani
    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x
    ROM Firmware Required: 4.1.2 JellyBean

    Version Information
    Status: Stable

    Created 2014-01-01
    Last Updated 2014-10-03
    31
    Download links:-
    ROM:-
    Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=8918&task=get

    PA Gapps:- http://forum.xda-developers.com/showthread.php?t=2397942

    Add Ons:
    Official AOSPA Boot Animation : http://forum.xda-developers.com/devdb/project/dl/?id=7196
    Place it in /system/media


    Older versions:-

    1st Boot takes time to boot 5-10 mins

    Screenshots:-
    25
    Ok guys.
    Time for an awesome update.
    And this time we have the much awaited feature HOVER. :D

    Changelog
    Code:
    [LIST]
    [*]Camera fixed.
    [*]Torch Fixed. (Issues in earlier build)
    [*]Janice Device Tree updated.
    [*]Kernel updated. (3.0.101)
    [*]Common Device tree updated.
    [*]AOSPA Source updated.
    [*]HOVER added.
    [*]App to SD Fixed.
    [/LIST]


    Paranoid Android Version: 4.4 RC 1 (STABLITY GUARANTEED)
    Android Version: 4.4.3

    Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=6831

    Mirror Link: http://goo.im/devs/Chirag_Galani/Janice/PA_4.4/pa_janice-4.4-RC1-20140612.zip

    Note:
    1)Random Reboot occurs when u select any option on the dialog box of HIGH VOLUME WARNING. This bug has been reported to AOSPA team. They are working for a fix. :)

    Thanks @dagger and @mykimouse to test my builds.
    Also, If Anyone interested to test early builds of this ROM and give me fast feedback can ping me via PM.
    22
    Solid strawberry update

    Ok Guys
    Finally TIME FOR UPDATE. :D :D
    Changelog:
    • Version Update: 4.6 BETA3 [SOLID STRAWBERRY) :D
    • Janice Device Tree updated
    • u8500 Device tree updated
    • Kernel updated
    • Many bug fixes.

    Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=8918&task=get


    Note: No special toolchain was possible this time as they are giving hell lot of errors while compiling, I and @t4n017 are working on the same. :) So, if we succeed I will post a build along with toolchain.
    My testers reported that this build was smooth enough not that laggy. Still, I will try to implement 4.8/4.9 toolchain for the next build.
    Thanks @dagger and @toyr99

    OT: This is the 800th post of the thread. :D :p
    20
    This is not spamming because I need to mention this in both my ROM threads. :D
    Hey guys,
    Wifi issues will be solved in next build.
    Yeah thats true.
    NO WIFI TOGGLE ISSUES :D
    Next update will be available tomorrow or after that.:D

    This will solve the issue:- https://github.com/TeamCanjica/Samsung_STE_Kernel/