• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][10.0][angler] Pixel Experience [AOSP][2020/12/22]

Search This thread

sufy1000

Senior Member
Oct 22, 2011
1,429
187
32
So, if i flash the latest build, I'm just gonna stay on that one forever aren't i? (security updates)

I mean what's the point if pixel experience 10 is not gonna get any updates?
 
Last edited:

HenryLolsen

Senior Member
Dec 8, 2015
65
7
I just installed the an OTA update, everyhing seemed fine, but now it says my security pattern is wrong. Known issue?

edit: should've uninstalled magisk before, should I? (well, does not even know if it was installed...)

edit2: fingerprint still reacting, but obviously wants the pattern first
 
Last edited:
  • Reboot into system and wait until the process finishes, it could take a little bit. After the installation is done, I suggest waiting before using the phone because it usually goes into thermal throttling after installing a ROM.
i was curious about this line as how much time do i wait ? any ideas ? thanks in advance :)
 

Mr.č_1

Senior Member
Nov 7, 2016
69
15
Tuscany
Realme 6
I have try to install this version (PixelExperience_angler-10.0-20200101-0925) of rom and I encountred the problem at fingerprint.
After, I have try to install the previous version (PixelExperience_angler-10.0-20191231-1607) of rom and the problem at fingerprint is not present; from this version (PixelExperience_angler-10.0-20191231-1607) I have launch the update to 10.0-20200101-0925 and after update the problem with fingerpirnt he showed up again.
Any solution?
Thak's a lot
Best Regard
just flash PE Rom android 9.0 for stable and daily driver

Sent from my Nexus 6P using XDA Labs
 

alesgood

Member
Oct 4, 2007
5
5
This is what we actually have (it's just my observations and conclusions):
1. FP/lockscreen: There are several solutions how to solve this problem
As of me, It was endless 'dance' flashing /FP and lock setinng up / wrong pin message after 1-3 reboots.... Bored.
I think there is lucky combination of phone's current configuration and appropriate method, or even consequence of actions. There is NO ONE
CLEAR solution.
2. Hotspot - no options with 20200101 ROM. Sure, there should be some fix, as this is definitely software issue.
3. Camera (my pain and tears and... main reason why I'm still here and waiting for miracle)
I have to say that Camera WORKS! (Sounds fundamental, don't it? )) Old Gcams or newer with crashes and black screens...
Everybody in this thread wants to know about 6 or 7 Gcam versions. Thats ewhyverytime I read such a loud statements, I'm getting nervous.
I honestly don't remember how many times I have installed and uninstalled some different Gcam mods. It became a kind of sport for me.
Main. It doesn't matter how you start Gcam. You always finish with black screen. However, you could put additional icons on the desktop screen and start different camera modes separately. And you never know so after which action camera will show you BS. Forget about change camera or change mode or tune some settings and go back...
Sellinux mode changer doesn't help
Camera restarter apk on GP - doesn't help
No matter what PE10 version you have. Always the same.
Most friendly mods to our phone I could say are made by Marlin-Ku (6.3.xx) and PX4.x camera. But again - I never managed to exit of apk without black screen.
SO.... I suggest to everyone: update your phone and don't lose your time if you want
Working camera some fresh and new options.
But if you don't care about Astrophotography, just downgrade to November PE10 version and you will have everything working.
 
  • Like
Reactions: Mr.č_1

Mr.č_1

Senior Member
Nov 7, 2016
69
15
Tuscany
Realme 6
This is what we actually have (it's just my observations and conclusions):
1. FP/lockscreen: There are several solutions how to solve this problem
As of me, It was endless 'dance' flashing /FP and lock setinng up / wrong pin message after 1-3 reboots.... Bored.
I think there is lucky combination of phone's current configuration and appropriate method, or even consequence of actions. There is NO ONE
CLEAR solution.
2. Hotspot - no options with 20200101 ROM. Sure, there should be some fix, as this is definitely software issue.
3. Camera (my pain and tears and... main reason why I'm still here and waiting for miracle)
I have to say that Camera WORKS! (Sounds fundamental, don't it? )) Old Gcams or newer with crashes and black screens...
Everybody in this thread wants to know about 6 or 7 Gcam versions. Thats ewhyverytime I read such a loud statements, I'm getting nervous.
I honestly don't remember how many times I have installed and uninstalled some different Gcam mods. It became a kind of sport for me.
Main. It doesn't matter how you start Gcam. You always finish with black screen. However, you could put additional icons on the desktop screen and start different camera modes separately. And you never know so after which action camera will show you BS. Forget about change camera or change mode or tune some settings and go back...
Sellinux mode changer doesn't help
Camera restarter apk on GP - doesn't help
No matter what PE10 version you have. Always the same.
Most friendly mods to our phone I could say are made by Marlin-Ku (6.3.xx) and PX4.x camera. But again - I never managed to exit of apk without black screen.
SO.... I suggest to everyone: update your phone and don't lose your time if you want
Working camera some fresh and new options.
But if you don't care about Astrophotography, just downgrade to November PE10 version and you will have everything working.

so the november version is the stable version ?
 

superottik

New member
Mar 24, 2017
4
0
What do I do wrong If I can't use flshlight and camera ? I tried with 2019 and 2020 version of Pixel Experience (angler of course). I don't even have camera icon and flashlight isn't flashed in shortcut bar. With Android Pie flashlight and camera working well. Clear cashes in aplication for camera doesn't work even other apps from google play like Open Camera.
 

bStrongAsh

New member
Feb 24, 2020
2
0
Finger Print reader doesn't work

Finger print doesn't work in this rom
Neither any other security option like PIN, Pattern and Password

Should I try Android Pie experience instead of this ?
 
ROM is stable enough to be a daily driver.
Fingerprint Workaround for 2020/01/01 ROM.
https://forum.xda-developers.com/showpost.php?p=81784289&postcount=1052
Exactly what I'm saying, people are still complaining about fingerprint camera stuff , i mean c'mon man skip some pages behind we've already discussed about everything in the group , no offence , BTW I'm using this rom since this method was posted and it's smooth / stable / no bugs no nothing full smooth and flawless no early shutdown as well :))
 

HernandezGFX

Member
Feb 6, 2013
16
0
I want to say thank you for keeping Angler alive.
I have flashed the ROM yesterday, spent the day testing it, all is working as intended, well except the issues with Camera NX/other mods support.
I'm sad that faceunlock is gone :(
Also I wanna ask about somethings I used quite frequently in Pixel Experience Pie but couldn't find them in 10: Hold power button for Flashlight and the screenshot functions that allow you to instantly delete or extend (long screenshot) your shot, are they gone as well, or can I enable them somewhere?
 

bStrongAsh

New member
Feb 24, 2020
2
0

gatoraid84

Senior Member
Jan 12, 2012
450
162
Jacksonville
Anyone here have trouble after a data wipe getting the proper APN settings? After Android 8.1 Google removed our ability to manually enter the correct settings and everytime I flash something my sim card does not import the proper settings and I have no way to edit them. I use straight talk and anybody in this forum is smarter than the customer service representatives. Anyone with some experience with this that could point me in the right direction would be greatly appreciated ?
 
Last edited:
G

GuestK00387

Guest
Anyone here have trouble after a data wipe getting the proper APN settings? After Android 8.1 Google removed our ability to manually enter the correct settings and everytime I flash something my sim card does not import the proper settings and I have no way to edit them. I use straight talk and anybody in this forum is smarter than the customer service representatives. Anyone with some experience with this that could point me in the right direction would be greatly appreciated ?

Give this a try sir, had similar a while back and it should be hiding here.
Settings/Network Internet/advanced/access point names/3 dots top right/New APN or reset to default.
 

gatoraid84

Senior Member
Jan 12, 2012
450
162
Jacksonville
Give this a try sir, had similar a while back and it should be hiding here.
Settings/Network Internet/advanced/access point names/3 dots top right/New APN or reset to default.
Thanks for the reply, ya I already tried all the obvious stuff but least for me Google has taken the ability away to edit or add apns. Reset to default does nothing. My sim card automatically adds Verizon apns. I use Verizon service but through straight talk. Really frustrating. I can get 3G using the secret dialer menu but that's it
 
G

GuestK00387

Guest
Thanks for the reply, ya I already tried all the obvious stuff but least for me Google has taken the ability away to edit or add apns. Reset to default does nothing. My sim card automatically adds Verizon apns. I use Verizon service but through straight talk. Really frustrating. I can get 3G using the secret dialer menu but that's it

Fair enough, I can see how that'd be frustrating!! Luckily I've always been able to re add my APN etc manually if I've managed to nuke my settings somehow. Hopefully someone can chip in with a cure.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 76

    GtwTyCR.png

    PixelExperience for Google Nexus 6P [angler]

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 10.0



    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    FMRadio
    Fingerprint reader
    NFC
    Lights
    Sound / vibration


    Known issues
    Nothing

    DON'T FLASH GAPPS, ALREADY INCLUDED
    Download from Pixel Experience website


    Donate
    Liked my work? Give me a beer

    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel
    Our blog






    XDA:DevDB Information
    PixelExperience 10, ROM for the Huawei Nexus 6P

    Contributors
    PixelBoot
    Source Code: https://github.com/PixelExperience

    ROM OS Version: Android 10
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: TWRP, Unlocked bootloader
    Based On: AOSP

    Version Information
    Status:
    Stable

    Created 2019-09-21
    Last Updated 2020-03-02
    31
    Nexus 6P - End of Support

    As most of you may have noticed on the website, it's officially over...
    With all due respect to the PixelExperience Board, the desicion was taken wisely. All due to the 31/12 build, when there were some slight doubts and exaggerated comments that the build was completely broke, I requested as for that build to be taken down, not to be shown alongside the 01/01 build as it was clearly superior.
    According to the team, removing one of the builds is a broken commandment, and so no word was spoken to me about this. I was inactive, enjoying New Year's Day with the family, whilst meetings between the PixelExperience staff upon my desicion.
    A total of 3 reviewers agreed to disallow my maintaining of Nexus 6P, even with the working 01/01 build. Before I snoozed to bed, I noticed the "This edition will no longer receive updates.", alongside the "Maintainer: Unknown".
    I reached out to as many staff members as I could, giving my most detailed explanation in order to defend my position, but it was all looking worse.
    I tested my luck and re-applied for maintainership, but it was instantly rejected.
    Time was starting to pass really quickly, unable to have a good sleep due to the worry of this loss.
    It's officially over everyone. As far as I have spoken with one of the head boards who actually took me into consideration, this is the current status:
    • No maintainer can apply to maintain Nexus 6P (angler).
    • PixelBoot is disallowed as for now to be a part of any relating PixelExperience project.
    I'm sorry to break this news at such a bad time, but I have tried all I could to save this opportunity.
    I don't want anyone of you to take my place as of now, due to large restrictions on angler as so far.
    As a precaution from me, I have backed up all the PixelExperience builds I have published throughout Nexus 6P's lifetime on AndroidFileHost.
    Finally, I will sadly state that I will not proceed further with this project in an unofficial way either.
    I will be sticking to LineageOS 17.0 unofficial for now until things get more clear.
    I need to focus on my examinations, so I will not be leaving this drag me down more than I already was.
    I would like the rest of your decade to move on smoothly, and not let this news bring you down.

    Thanks in advance,
    PixelBoot
    30
    Peripherals

    FBE Recovery: TWRP
    FBE Recovery (4 Core): TWRP
    BLOD Patch (4 Core): boot.img
    Nexus 6P PixelExperience Telegram Group: Join
    26
    Install Instructions

    • Grab our recovery from the peripherals section and install it.
      Through TWRP Recovery:
      Install Zip > Install Image > Choose ‘recovery.img‘ > Select partition ‘Recovery’ > Swipe to confirm flash
      Through Fastboot:
      Code:
      fastboot flash recovery recovery.img
    • Install the ROM and then wipe your internal data partition.
      Through TWRP Recovery:
      Wipe > Format data
      Through Fastboot:
      Code:
      fastboot -w
    • Reboot into system and wait until the process finishes, it could take a little bit. After the installation is done, I suggest waiting before using the phone because it usually goes into thermal throttling after installing a ROM.
    26
    December Build had issues. PE team decided to take it down for several reasons. Issues are due to their new source code which destroys angler's camera and video. I'll be trying my upmost to get it settled with another fix. Sorry for the major inconvenience. Wish me luck!