[ROM][10.0] crDroid v6.15 Updated : 11th Feb 2021

Search This thread

Habacuck

Member
Jul 17, 2016
33
1
For sound, edit Mixer_paths_tasha.xml search for:



replace de values 82 for 84,85, maximum 86.


For headphones, search for:

and replace de values to 82 or 84


Recommend that you install Dolby Digital Plus.


I investigated the dolby is installed as a magisk module, do you recommend installing dolby or is it better to viper4android?
 

Hakkinen3K

Senior Member
Mar 30, 2014
254
21
Santiago
Xiaomi Poco X3 NFC
I investigated the dolby is installed as a magisk module, do you recommend installing dolby or is it better to viper4android?

Dolby is working very goods, except at the beginning because it crashes but ir solved after a reboot. If you install dolby must configure not optimize (battery settings) Dolby app and Dolby service.

Viper4android for some reason I cannot install it freezes at reboot on Sony logo, since then only use Dolby.

Sent from my Sony G8142 using XDA Labs

---------- Post added at 03:22 AM ---------- Previous post was at 03:21 AM ----------

I investigated the dolby is installed as a magisk module, do you recommend installing dolby or is it better to viper4android?

Dolby is working very good, except at the beginning because it crashes but it solved after a reboot. If you install dolby must configure not optimize (battery settings) Dolby app and Dolby service.

Viper4android for some reason I cannot install it freezes at reboot on Sony logo, since then only use Dolby.

Sent from my Sony G8142 using XDA Labs
 
  • Like
Reactions: Habacuck

Habacuck

Member
Jul 17, 2016
33
1
In the initial configuration, a date and time appeared that did not match the current ones and I corrected them manually, but at the time of restarting the device they were modified again, does anyone know how I can avoid that?
I mark the boxes to update with the network but they are not modified and in the case of the time zones, despite selecting mine, it does not match.
 

Shujath

Recognized Developer
Feb 17, 2015
465
3,160
Hyderabad
In the initial configuration, a date and time appeared that did not match the current ones and I corrected them manually, but at the time of restarting the device they were modified again, does anyone know how I can avoid that?
I mark the boxes to update with the network but they are not modified and in the case of the time zones, despite selecting mine, it does not match.

Yep, thats a known issue, but the time gets auto updated when it detects the SIM (< 10 secs ).

multi languages need to be completed
What language?

I need Chinese please
thanks
Sure, It will be enabled in next build. :good:
 

Habacuck

Member
Jul 17, 2016
33
1
Yep, thats a known issue, but the time gets auto updated when it detects the SIM (< 10 secs ).


What language?


Sure, It will be enabled in next build. :good:

Well, it's strange because I did all the initial configuration and the sim operator already appeared to me but the date and time data were not updated, and although I change them manually when restarting they change again, I do not know if the change influences something country.
 

vyceonice

New member
May 4, 2020
1
0
Hi guys, i have a issue, the new simcard i bought (kenamobile) works only on 3g when i switch on 4g It get no signal.
Also the signal disappear randomly.
The strange thing Is that with the other simcard i have before works on 4g.
Sorry for my bad english? i'm from Italy.
 

Aki_ZJ

New member
Sep 8, 2020
4
0
Then where should I download this Rom? I want to use the Chinese system interface. Where can I find this Rom.If you can, thank you very much. This is a good Rom, come on, thank you very much for your contribution.:good::good::good:
 

Doomer D. Great

Senior Member
Jun 12, 2007
117
3
Dubai
www.nostrotech.com
Magisk no Hide and No Encryption

Awesome ROM. I'm loving it!

I'm having the following issues:

  • SIM one always show as disconnected and SMS and calls revert to SIM 2 and I have to manually set to SIM 1. Calls are working and so is SMS and Data
  • I cannot encrypt my phone. Encryption starts and immediately phone reboots
  • Magisk is not showing the Hide option. I cannot hide any applications
  • Magisk is failing security checks:
  • Screenshot_20200924-160621.jpg
 

Attachments

  • Screenshot_20200924-160621.jpg
    Screenshot_20200924-160621.jpg
    228 KB · Views: 110
Last edited:

Doomer D. Great

Senior Member
Jun 12, 2007
117
3
Dubai
www.nostrotech.com
Awesome ROM. I'm loving it!

I'm having the following issues:

  • SIM one always show as disconnected and SMS and calls revert to SIM 2 and I have to manually set to SIM 1. Calls are working and so is SMS and Data
  • I cannot encrypt my phone. Encryption starts and immediately phone reboots
  • Magisk is not showing the Hide option. I cannot hide any applications
  • Magisk is failing security checks:
  • Screenshot_20200924-160621.jpg

Have I asked a very basic or silly question? Not a single response so far... I'm at a stage where I have to revert to stock Android 9. If I made a rookie mistake, please point it out.
 
Last edited:
Oct 27, 2018
1
0
Have I asked a very basic or silly question? Not a single response so far... I'm at a stage where I have to revert to stock Android 9. If I made a rookie mistake, please point it out.
1. I don't now what that is. With you're SIM.
2. The Encryption on this phone doesn't work on the custom roms, as far as I know that's also why force Encryption on setup is disabled.
3. Maybe you have to force close the app and start it again. Also a reinstall often helps.
4. I don't have that problem. Maybe you have a module that modifies to much or a incorrectly installed rom.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    <!---This is a forum post template for manitainers to use on XDA, or whatever forum you post your build(s) on. You can copy/paste what is here and edit as necessary for your purposes-->

    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn

    Flashing Instructions:

    Pre-installation:

    First time installation:
    • step 1 : Flash Stock ROM
    • step 2 : Flash Recovery in Fastboot
    • step 3 : Flash ROM GAPPS and Magis


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/Yoshino-StockDevelopment

    Download:
    ROM https://crdroid.net/<device codename>
    Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_maple.txt

    Known issues:
    . Test and Tell


    Visit official website @ crDroid.net
    Xperia ALL ROMS Group
    crDroid Community Telegram
    Donate to help our team pay server costs


    Contributors
    Shujath, modpunk, derf elotROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    Based On: Lineage

    Version Information
    Status:
    Stable
    Stable Release Date: 2020-06-29

    Created 2020-06-29
    Last Updated 2020-06-29
    20
    Instructions :

    SECURITY ADVICE

    Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!


    Install Latest Firmware

    • Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
    • Grab newflasher and put it in the same folder as the firmware files.
    • Read the newflasher original post on XDA for general instructions!
    • Remove the following from the folder so they won't get flashed:
      • all *.ta files (keep the one in the boot/ directory)
    • Turn off your phone
    • Hold the volume down button and attach it via USB to your system till you see LED turning green
    • Run newflasher from within this directory to flash the remaining files
    • Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
    • Hit Yes for all the next questions asked in Newflasher(Only dumpin of trim area should be selected no and rest all questions should be selected as yes.
    • Once Newflasher flashes the Stock rom, boot into it and make sure volte is available.(VOLTE WILL NOT WORK ON BLISS IF YOU DO NOT HAVE IT IN STOCK ROM.
    • Incase you are not able to see volte icon in stock either your carrier does not support it or there is an issue with the stock rom(Try flashing it again).
    • Once you confirm Volte is available in stock, Flash the TWRP recovery and follow below instructions carefully.
    • Boot into recovery >> Format Data >> Power off the Phone.
    • Again boot into recovery >> Format Data >> Power off the Phone.
    • This time boot into recovery >> Wipe Internal Storage.
    • Flash ROM, Gapps, Magisk.
    • In the setup wizard select SIM 1 as the default sim for calls data and message.
    • Once Boot is complete, wait patiently for few mins.
    • Go to Settings >> Blissify >> Advanced System Icons >> Set icon for Volte.
    • Voilllaa you should have volte and dual sim both enabled.


    Google Apps

    You can download and install the Google Apps from opengapps.org. You need ARM64 and 10.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.

    MicroG


    This ROM does support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android Pie.


    FEATURES AND ISSUES
    Code:
    - Boot: Ok
    - Bluetooth: Ok
    - WiFi: Ok
    - WiFi Hotspot: Ok
    - RIL - Phone - Data: Ok
    - VoLTE: Ok
    - GPS: Partially OK(Working with carrier network)
    - Camera: Ok (SONY Stock Camera)
    - Camcorder: Ok (SONY Stock Camera)
    - Lights: Ok
    - MicroSD: Ok
    - Accelerometer: Ok
    - Compass: Ok
    - Gyroscope: Ok
    - QTI sensors: Ok
    - Touchscreen: Ok
    - FM Radio: NA
    - Fingerprint: Ok
    - Vibrator: Ok
    - Microphone: Ok
    - Audio & music: Ok
    - Bluetooth audio: Ok
    - NFC: Ok(Need Testing)
    - Kernel: Ok
    - Graphics: Ok
    - 3D Rendering: Ok
    - Clock: Ok
    - Offline Charging: Ok
    - USB: Ok
    - USB OTG: (Need Testing)
    - Encryption: Broken
    - Live Display (Profile changing on Reboot) 
    - SEPolicies: Enforcing
    [/SIZE]




    Known Issues

    Please test and reply
    18
    Download and Changelog:

    29th June :

    -- Initial Release :

    Changelog :
    - Enabled strict thermals for quick charging
    - Updated display related props
    - Fixed randomly loosing of network
    - Maps Fixed.
    - Many more which I forgot

    Download : https://www.androidfilehost.com/?fid=8889791610682881314

    09th August 2020

    Changelog :

    * We are now Official.
    * Managed to get RIL and Volte working wihtout
    * Modem Switcher
    * Customization Selector
    * Modem Customization
    * Fixed Random loss of Network on both Single and Dual SIM.
    * Fixed Maps Crash, Huge thanks to @rcmiku
    * Added Xperia Album thanks to @
    * Removed Unncessary volte props causing crashes on the system.
    * Satery net still passing out of the box
    * Enabled Vulkan rendering.
    * Removed unused Symlinks for Adreno.
    * Downgraded android.hardware.gnss to 1.0
    * Upgraded display vendor vendor.display.config to 1.9
    * Added GNSS packages in try to fix offline GPS.
    * Added CNE packages for better connectivity.
    * Added IWlanService for VoWifi(Still not working)
    * Added NXP hal for NFC
    * Addressed CND Denails.
    * Fixed Android Debugging
    * Fixed Stock Camera memory Leak
    * Unified Device Trees (Device will get props accordingly)
    * Fixed data issue on single SIM devices(No need to toggle WiFI)
    * Removed Vulkan rendering which was causing Blank screen on various apps.
    * Added Sony Stock Movie Creator App
    * Removed buggy DT2W
    * August Security Patch merged
    * Kernel upstreamed to 4.4.232
    * GPS Fixed
    * Enabled Doze
    * Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).

    Download Link : https://sourceforge.net/projects/cr...Android-10.0-20200809-maple-v6.9.zip/download



    11th Feb 2021

    Changelog :

    * January Securty Patch
    * 4.4.255 Kernel
    * CrDroid code upstream.
    * Encryption Fixed(Format Data if you are unable to boot).

    Download : https://www.androidfilehost.com/?fid=17248734326145735327

    I did try Android 11 and felt Camera quality is degraded, Will stick around to 10 for a while.
    9
    09th August 2020

    Changelog :

    * We are now Official.
    * Managed to get RIL and Volte working wihtout
    * Modem Switcher
    * Customization Selector
    * Modem Customization
    * Fixed Random loss of Network on both Single and Dual SIM.
    * Fixed Maps Crash, Huge thanks to @rcmiku
    * Added Xperia Album thanks to @
    * Removed Unncessary volte props causing crashes on the system.
    * Satery net still passing out of the box
    * Enabled Vulkan rendering.
    * Removed unused Symlinks for Adreno.
    * Downgraded android.hardware.gnss to 1.0
    * Upgraded display vendor vendor.display.config to 1.9
    * Added GNSS packages in try to fix offline GPS.
    * Added CNE packages for better connectivity.
    * Added IWlanService for VoWifi(Still not working)
    * Added NXP hal for NFC
    * Addressed CND Denails.
    * Fixed Android Debugging
    * Fixed Stock Camera memory Leak
    * Unified Device Trees (Device will get props accordingly)
    * Fixed data issue on single SIM devices(No need to toggle WiFI)
    * Removed Vulkan rendering which was causing Blank screen on various apps.
    * Added Sony Stock Movie Creator App
    * Removed buggy DT2W
    * August Security Patch merged
    * Kernel upstreamed to 4.4.232
    * GPS Fixed
    * Enabled Doze
    * Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).

    Head over to Post#3 for download links.

    8
    ROM Updated :

    11th Feb 2021

    Changelog :

    * January Securty Patch
    * 4.4.255 Kernel
    * CrDroid code upstream.
    * Encryption Fixed(Format Data if you are unable to boot).

    Download : https://www.androidfilehost.com/?fid=17248734326145735327
    TWRP : https://androidfilehost.com/?fid=17248734326145719115

    I did try Android 11 and felt Camera quality is degraded, Will stick around to 10 for a while.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone