[ROM][10.0][ LOS 17.1 - MediaPad M3 Lite 8/10 ][ Update 2023-02-26 ]

[surdu_petru]

Hello !

The new Android 10 is coming to your Huawei MediaPad M3 Lite 8/10, Qualcomm Snapdragon MSM8940 with the new LineageOS 17.1 !



Please note that this ROM is one of my side projects, for which I could provide zero warranty. By installing this ROM, you acknowledge that you take all the risks that come with installing custom firmwares on your devices, including but not limited to bricking your device, losing your data, etc.


Warning !
Installing a custom ROM on your device can sometimes be difficult and also with unwanted consequences! Therefore, make sure that you understand exactly what risks this operation entails - you are the only one responsible for all actions taken on your device.



Devices Supported:

Huawei MediaPad M3 Lite 10 :
BAH-AL00/BAH-L01/BAH-L09/BAH-W09

Huawei MediaPad M3 Lite 8 :
CPN-AL00/CPN-L0J/CPN-L09/CPN-W09




About LineageOS :

LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.




/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/






Downloads :

LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip md5 : b86f752b8851bf8a8e1ce9e2168ee92d

This ROM do not include GApps
please use always the last available pack :

OpenGApps for Android 10 ARM64






Instructions :

0. LOS 17.1 must be installed via TWRP 3.3.1-0
1. After device boot on LOS 17.1 you must to install the New TWRP 3.3.1-3
( TWRP 3.3.1-3 needed for flash GApps on LOS 17.1 )
2. plug USB cable to your Desktop/Laptop for copy files ( or add them to a external storage/microSD card )
3. go to Wipe -> Swipe to Factory Reset
4. copy LOS-17.1 ROM & GApps to Internal/External Storage
5. go to Install -> check the LOS zip file
6. Add more Zips
7. check GApps zip file
8. Swipe to confirm Flash
9. Wipe cache/dalvik -> Swipe to Wipe
10. Reboot System
11. Enjoy!




What's working :

* Touchscreen
* Audio & Video
* WIFI
* BT
* GPS
* FPS
* Lights
* Sensors
* Internal/External Storage
* ADB/MTP & USB/OTG
* RIL & data connection
* Camera Video recording
* Flip Cover
* Encrypt device
* SELinux Enforced




Not working :

* Photo Camera

* there could be also others minor issues !




Credits :

LineageOS Team

dianlujitao

LuK1337

Greg Kroah-Hartman for keep alive 3.18.y kernel !





Source Code :

device tree : android_device_huawei_bach Branch: ten!

kernel: android_kernel_huawei_bach Branch: ten !





Screenshots :

​

Contributors
surdu_petru
Paypal Donation : paypal.me/petrusurdu1
Source Code: https://github.com/Huawei-Dev?tab=repositories

ROM OS Version: Android 10 / Q
ROM Kernel: Linux 3.18.140
ROM Firmware Required: LineageOS 16.0 Android Pie
Based On: LineageOS

Version Information
Status: Stable

Created 2019-10-20
Last Updated 2023-02-26

 

[surdu_petru]

Donors :

@ossizwei

@Jobode747

@Micromind

@morgan7676

@Kagum

@mrdark5555

@realdomdom

@xbor

@#marcg#

Norbert Ossendorf




Once again thank you very much to all donors !!!

 

[csjjpm]

Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet

I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.

Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?

thanks
Paul

---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------

Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"

 

[surdu_petru]

Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet

I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.

Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?

thanks
Paul

---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------

Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"

Yes you can update now Twrp to 3.3.1.

Btw I didn't tested GAppps. So if it's not working just remove it.

 

[csjjpm]

This is happening a lot when I go into Setting: "android setup keeps stopping"

 

[surdu_petru]

This is happening a lot when I go into Setting: "android setup keeps stopping"

Ok, just remove GApps and see how it's working ... later you can install nano or pico, not full version of GApps !

EDIT :

Full version of GApps it's not recommended at all as there is just a Betta LOS 17.0 !

 

[oddhap]

Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.

After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.

 

[surdu_petru]

Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.

After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.

Well done !

 

[csjjpm]

Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.

After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.

Thanks, I didn't know if the 'android setup' was important or not. Have disabled it and all quiet now.

I tried a few version of GAPPS10, Pico, Nano etc. and still got the errors. Once 'android setup' disabled now issues.

Thanks

 

[fallensoldier]

Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.

 

[surdu_petru]

Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.

Thank you for feedback!

 

[sergybizzi]

Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.

 

[surdu_petru]

Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.

Thanks for feedback ! Btw, I already noticed fingerprint issues .... but as you already said the ROM will be improved with each update !

At this time even Lineage OS didn't released the stable source yet .

 

[sergybizzi]

@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!

 

[surdu_petru]

@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!

Sorry, no way ... I tried a few time to revert to stock but my device can't boot on stock recovery from some unknown reasons .

But there is a few users wich already reverted this device to stock after installed Lineage OS 16.0 ( Android Pie ), so you could search on Lineage16.0 thread for their posts, or you can get in touch with them through PM.

Good luck !

 

[sergybizzi]

Ok no problem.. I'll find a way to get back to the stock .. But first I'll try the other roms with Android 9. Thank you

 

[mrbarnie]

hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie

 

[surdu_petru]

hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie

My tablet is also LTE version . What it's not working now ? Anyway many stuff will be improved in the next updates .

 

[mrbarnie]

great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
i have BTV-DL09
Build BTV-DL09C100B311
EMUI 5.0.4

 

[surdu_petru]

great thanks a lot i thought that this update is only for the lite version, which means WIFI only.

NO, LITE version doesn't mean WIFI only !