[ROM][10.0][ LOS 17.1 - MediaPad M3 Lite 8/10 ][ Update 2023-02-26 ]

[z172839]

Hello, I swiped into recovery3.3.1-1 and then into LineageOS-17.1, which showed that the signature verification failed and the ROM could not be swiped in. What's the problem? Please help me have a look, thank you!

 

[surdu_petru]

z172839​

You shouldn't enable signature verification into twrp before to install this ROM !

 

[z172839]

z172839​

You shouldn't enable signature verification into twrp before to install this ROM !

Error prompt on the picture appears when swiping in and closing signature verification

 

[surdu_petru]

Error prompt on the picture appears when swiping in and closing signature verificationView attachment 5847873

before installing this new update you were definitely on Android 9 - Lineage OS 16.0 as mentioned in the OP at the bottom?

ROM OS Version: Android 10 / Q
ROM Kernel: Linux 3.18.140
ROM Firmware Required: LineageOS 16.0 Android Pie
Based On: LineageOS

 

[surdu_petru]

z172839​

Please take a look here too ! This tablet is not as simple as other devices when it comes to installing a custom ROM... that's why you have to read absolutely everything from the Official Post (OP) to understand and follow the steps strictly, no matter if it's TWRP or LineageOS... otherwise your tablet can very easily become unusable, and the responsibility belongs entirely to you !

Thank you very much for your understanding!

 

[frankielin]

dirty flash of latest release.. Everything ok!! Thank you surdu_petru for the update!!!

 

[z172839]

在安装此新更新之前，您确定使用的是底部 OP 中提到的 Android 9 - Lineage OS 16.0？

 

[z172839]

z172839​

Please take a look here too ! This tablet is not as simple as other devices when it comes to installing a custom ROM... that's why you have to read absolutely everything from the Official Post (OP) to understand and follow the steps strictly, no matter if it's TWRP or LineageOS... otherwise your tablet can very easily become unusable, and the responsibility belongs entirely to you !

Thank you very much for your understanding!

OK, I changed a ROM package and successfully swiped it in. It should be that the ROM does not fit or there is a problem with my own operation. Now I have successfully started up. Thank you for your guidance! Thank you again!

 

[frajer]

Unfortunately, this tablet is one of the most difficult to control when installing custom ROMs.... that's why I mentioned step by step in each OP what must be strictly followed both in the official posts about TWRP and about LOS! All you have to do is read the entire OP very carefully, and strictly follow the steps there, just one step omitted/wrong and your tablet will start giving you problems!

Hi;
I don't have any objections about the version twrp. In my case worked version 3.2.0. I also was used this version to install your version of lingerie os 17.1. All work perfect and really quick.

I will say more. can't wait for you to pick up version 19. You're doing a really great job. I thank you for that very much.

Regards

 

[fschade]

Hi, i did not read all the 38 pages of this thread but i have a question. I followed all steps. Installed LineageOS but it doesn't go further then the logo with the (. What to do? I can reset it or anything.
Now i'm a little bit further. It boots into an error on encryptie. it won't even boot in TWRP. I do see the twrp screen and it loads, but during loading it reboots. any idea how to solve this?

 

[frajer]

Hi, i did not read all the 38 pages of this thread but i have a question. I followed all steps. Installed LineageOS but it doesn't go further then the logo with the (. What to do? I can reset it or anything.
Now i'm a little bit further. It boots into an error on encryptie. it won't even boot in TWRP. I do see the twrp screen and it loads, but during loading it reboots. any idea how to solve this?

Which version of device?
Which version TWRP was installed?
For example I have Mediapad M3 Lite 10'' - codename BAH-L09
On my device property works only twrp 3.02 (see my posts upper) Each different version twrp makes over and over bootloop.
My advice install again diffrent version twrp using ADB (and remember that first boot maybe takes a long time). Here is post how to remove data encryption: https://forum.xda-developers.com/t/fixed-how-to-remove-data-encryption-in-twrp.3757595/

 

[mib1982]

I have been using this ROM for several versions. However, since the latest update, I am not able to do any updates or installation of any apps. It says I should get rid of some of my apps to free up some space.

I removed the external SD card and reset the device to factory defaults.

After setting up the device again, the problem persists, any ideas?

Edit: Nevermind, works again now, I had to clear the internal storage via TWRP to make it work. After setting up the device yet again, the problem is gone.

Thanks for the good work with this ROM.

 

[fschade]

Which version of device?
Which version TWRP was installed?
For example I have Mediapad M3 Lite 10'' - codename BAH-L09
On my device property works only twrp 3.02 (see my posts upper) Each different version twrp makes over and over bootloop.
My advice install again diffrent version twrp using ADB (and remember that first boot maybe takes a long time). Here is post how to remove data encryption: https://forum.xda-developers.com/t/fixed-how-to-remove-data-encryption-in-twrp.3757595/

TWRP 3.2.0.0 as mentioned in the instalation guide.
i don't know the code name but i know it's a mediapad M3 lite 10
Currently everything is wiped, i only have adb but it won't boot into twrp.
If you any tips how to get it back into booting into twrp. I now only get the EMUI recovery menu and it won't work because it want to update but it won't update.

 

[fschade]

TWRP 3.3.1.0 as mentioned in the instalation guide.
i don't know the code name but i know it's a mediapad M3 lite 10
Currently everything is wiped, i only have adb but it won't boot into twrp.
If you any tips how to get it back into booting into twrp. I now only get the EMUI recovery menu and it won't work because it want to update but it won't update.

Update: I erased everything with "fastboot erase system".
Used TWRP 3.3.1-0 and installed LineageOS 17.1 succesfull.
After that i installed TWRP 3.3.1-3.
It starts loading the new twrp but half way it reboots.
Any idea what i can do to get GApps?

 

[fschade]

Update: I erased everything with "fastboot erase system".
Used TWRP 3.3.1-0 and installed LineageOS 17.1 succesfull.
After that i installed TWRP 3.3.1-3.
It starts loading the new twrp but half way it reboots.
Any idea what i can do to get GApps?

I found the answer. Sorry! it was just al lot of reading and clicking true:
- with your device in bootloader mode ( and after TWRP was installed by : fastboot flash recovery C:\twrp-3.1.0-0-eva.img, in your case ) you should make three operations at the same time :

* press & keep pressed Volume Up
* fastboot reboot
* disconnect the USB cable as soon as possible !

 

[fschade]

I found the answer. Sorry! it was just al lot of reading and clicking true:
- with your device in bootloader mode ( and after TWRP was installed by : fastboot flash recovery C:\twrp-3.1.0-0-eva.img, in your case ) you should make three operations at the same time :

* press & keep pressed Volume Up
* fastboot reboot
* disconnect the USB cable as soon as possible !

I got everything working. Thanks for all the work! The only thing which is missing is the netflix app. Does anyone have idea how this can be solved. I don't want any illeagle app, dus the netflix app.

 

[The4anoni]

Hi
I have installed twrp_3.3.1-0.img and now I am stuck at TWRP initial boot log, what I am doing wrong?

EDIT: NVM, fastboot erase userdata fixed issue!

 

[shirinome]

I have installed "LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip on TWRP 3.3.1-3" to my M3 lite 10(BAH-L09). Its very fine ,thank you!!
I want to you report about display sleep mode by power bottom. It seems not satisfied.
Display always indicate "Time and Day" and Display not comletely off ...and buttery consumed.
I tried some power and display settings, but none of them worked.
Sorry if you already knew about this issue.

 

[shirinome]

I have installed "LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip on TWRP 3.3.1-3" to my M3 lite 10(BAH-L09). Its very fine ,thank you!!
I want to you report about display sleep mode by power bottom. It seems not satisfied.
Display always indicate "Time and Day" and Display not comletely off ...and buttery consumed.
I tried some power and display settings, but none of them worked.
Sorry if you already knew about this issue.

I found resolve. lock screen -> “Always show time and info” -> off
I'm not sure the display is actually turned off.

 

[shirinome]

I found resolve. lock screen -> “Always show time and info” -> off
I'm not sure the display is actually turned off.

Battery consumption is reduced.
So Display seems off. thanks