
Welcome to Floyd Q Port For the Exynos8890 Series
Some information you should know..
- This is a full Galaxy Note9 port with Android version 10.0 / Oneui 2.5
- This ROM is made with heavy collaboration from @corsicanu make sure to give him coffee
- Read the instructions and the F.A.Q Before installing the rom or posting a reply As there are critical information in there!.
- You are not allowed to use this base, aroma, or any parts of it for your own "ROM". if you want to make a Q port, "DIY"
- Any sort of Kanging will be reported without hesitation.
- If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
Submitting new issues/Requests
- First read existing issues and the F.A.Q Below to ensure its not a duplicate
- Properly report issues by Submitting an issue on GitHub
- provide as much info as possible so the issue is not ignored / closed
Its only fitting to release V7 in July isn't it. The ROM is 2 years old and still has an active following which blows my mind. id like to say thanks to all the users for your support all this time, and especially a big thanks to the testing team who stuck by me for this long.
Between my university, life and other projects, i haven't had consistent time to work on the ROM, i have updated it to the latest note 9 release (which is the last one by samsung) with May 2022 Security patch. Ive done some work on the kernel and base to remove some of the issues caused in V6, added a bunch of new fixes we gathered over time and from the note 8 Q project. and just overall tidy up the ROM, there is still some work left to do, but i dont want to delay V7 any further, if/when we do another version, it will contain more experimental fixes that didn't make it here.
I have done some changes to audio, which may be better or worse on the long run, hopefully to the better, the rom only had couple months of testing with a very small test group, so i wouldn't say its bullet proof. RAM, Camera Audio and overall stability has been worked on, and hopefully this reflects in real usage. ive only used the S7 to play a couple games and use some social media, as it is not my daily driver.
So far the black screen / alarm issue has not been commonly reported, neither did audio muting, however i cant rule out that it was fully fixed until it is tested by much more people. incase you still face these issues, open new reports on github
Overall i hope this new version works better for everyone, we reached the peak of what we can fix back in V6 and that was quite underwhelming, so hopefully with this new release Exynos8890 gets a new lease on life, atleast when it comes to OneUI
And no, i do not think we will ever see a OneUI 3 public release, it is simply too buggy to even look at.
Thanks everyone for your continuous support throughout the years.
V6.0 Release Notes :-
Its been 5 months since the last release, i expected the popularity of this rom to go down and vanish. however, 30 thousand downloads later, i think it is time to push another update. perhaps the last Q update. i dont know what more i can improve in this rom.
This release comes with a ton of significant fixes in every direction, be sure to read the changelog as it covers everything. all the way from stability, to muting to performance was adjusted.
EIS (Video stabilization) has also been enabled and fixed in this release
as mentioned, i am not sure what more can be done to make Q better, right now we are down to basically near impossible to fix errors. the overall experience is great with the stock kernel. and basically future versions might not carry big changelists anymore, and only basic rebases. however ive proven my self wrong many times before so lets wait and see
Make sure to check the F.A.Q if you still face muting. so far its frequency dropped significantly where i think it is as good as it gets
P.S : Majority of the fixes are kernel sided, Do not change kernels until they are updated with new fixes
V5.0 Release Notes :-
Alright, Finally. This release was a bit rough due to the immense changes in 2.5 and how late firmware took to be released.
I hope you enjoy this release, A LOT has been changed, and alot of bugs has been resolved both directly and indirectly
Some bugs like Audio muting and overnight crash never occured under testing, so they might be resolved too, however i will not rule that unless public reviews come in.
Id like to give a big shoutout to the testers group who has been at work for over 3 weeks hard testing this release
Another thing to mention is, i had to remove DeX Wireless mode for being too unstable. so sadly you guys wont get it in this release.
i don't know if its fixable, but that's a problem for another day
The F.A.Q as always has been updated to reflect new changes, so give it a read please. Regarding the remaining bugs, better workarounds now exist so check them out
Warning : Dirty flash is not recommended, some testers faced issues. do it under your own risk, and avoid reporting issues if you dirty flashed please!
V4.0 Release Notes :-
Hey everyone, we meet again. This release again focuses on stability and misc improvements, has some additional features such as secure folder
but the main focus was fixing our existing bugs. Based on ~3 weeks worth of testing, there are great improvements to almost every part of the ROM
The F.A.Q as always has been updated to reflect new changes, so give it a read please. Regarding the remaining bugs, better workarounds now exist so check them out
While i wanted to release this on my schedule (20 of each month) i had to delay it due to health issues with my father. so thanks for understanding and I'm happy to say that he is on his way to recovery, it was scary times for sure. but taught us a lot.
chatter aside, i hope you enjoy the ROM, and let me know how it goes, Development on V5 starts early next month, and this time hopefully I'm focusing on More features possibly a OneUI 2.5 port if it came in time. will see how it goes
V3.0 Release Notes :-
Hi once again, Hope you enjoy this release. while its a smaller update compared to V2. this focuses more on stability and fixing some annoying issues from V2.
OneUI 2.1 Gives us great fixes regarding memory leaks and performance degradation. and I've improved and re-did all the fixes I've developed for this port to be much simpler and easier to update in the future. instead of relying purely on Hacks.
There are still some bugs that i am starting to feel like we will never fix, but then again this is only the 3rd release. so we will see
how it goes in the future.
The F.A.Q as always has been updated with new notes and workarounds.
With that said, Enjoy the release. hope you like it. and as always, if you appreciate what i do, leave a thanks, constructive feedback and consider a donation
V2.0 Release Notes :-
Hello again, Ive taken my time With this release and spent significantly more time trying to improve the experience as much as possible.
There are still some bugs remaining, the biggest being the overnight crash (which thankfully we have a workaround for those who face it often)
Besides that i belive most of the remaining issues are either minor or can be lived with for now.
This release focuses on stability first, the previous base was a hacked up version of FEB and MAR with quite basic fixes. everything has been redone and hopefully for the better
Thanks you for your great reports that helped improve this ROM alot. and thanks to the testers who spent hours testing and evaluating this ROM. Please be sure to read the F.A.Q and notes to avoid issues
P.S : This version has very experimental Note 7 FE support. Let me know if it works or not, if it does, Iris probably wont work.
Initial Release Notes :-
After a battle that took months on end, im able to deliver you this project in a state were i can deem it as "Daily Driver", This was no easy task, Android Q has changed alot
And a skin such as oneui 2.0 was never intended to run on this device, But here we are. another middle finger to planned obsolescence.
Aside from project Treble, this officially is My first major project on this platform. and i hope you like it.
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
And The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu , without him you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from his Amazing "HadesRom" Series which im sure you guys are familiar with already.
A Lot of great people helped me make this project, especially testers who has been digging through this ROM for over a month. make sure to check them out in the credits section.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
Before you post : READ everything, And especially the install steps and F.A.Q, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or something major, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here fix nao" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
- Android 10.0
- N960FXXS9FVE1 May 2022 release
- Heavily debloated/deknoxed
- Zipaligned and tuned
- Optimized for battery and performance
- Full Samsung OneUI 2.5 Experience
- Magisk Supported
- RMM PrePatched
- F2FS for userdata and cache
- CronosKernel v6.5
- Selinux Enforcing
- Safetynet bypassed out of the box
- And all the goodies Android Q / Oneui 2.5 Brings
- Full support for the Entire Exynos8890 family of devices
- Contains all features from S9 minus hardware specific ones (Iris/faceunlock etc)
- All the main features are present (Wifi,Bluetooth, gps, camera etc)
- Samsung S9 DolbyAtmos
- optimised for S7/S7E/N7/N7FE with their own separate configurations
- Many prop and feature tweaks and exclusive apps
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OMC/OXM setup with ~85 countries supported
- MultiWallpaper support
- Selectable SmartManager (Intl / CN)
- @corsicanu Patched GoodLock manager
- Debloated via Aroma (Email, Calculator, Video, Music, Voice Recorder, etc)
- Custom boot animations (Samsung Wh/Bl , Floyd, Hades)
- Storage Booster / Native APP2SD
- Custom Fonts/Emojis included (And 1120 Font mods/Google fonts/iOS Emoji etc)
- Patched for Single/Dual SIM + SDCard
- Patched Dual Messenger for All user apps
- Selectable Edge Panels and edgelighting+
- SamsungDaily (BixbyHome) , Bixby Voice and Bixby Vision
- Recovery toggle (Long Press restart)
- Samsung Max and other Misc WiFi features
- Native AppLock
- Wifi S-Secure
- Native Screen Video recorder
- Native Call recorder
- Custom CSC features (status bar network speed, Call screening, LTE Only etc)
- SecureFolder + Knox WorkProfile
- Google LiveCaptions
- Selinux Enforcing
- Native SafetyNet bypass
- Selectable Note 10/Note 9 Ringtone/Notification sound
- Selectable support for rounded UI elements
- Selectable ADAway
- Selectable Android 10 NavigationBar/Gestures
- Selectable DualSpeaker
- And the list keeps going!
All of the custom kernel features can be controlled using HKTweaks by @corsicanu
- Full Android Q Support
- Compiled with GCC 4.9 toolchain
- Optimized for battery and performance
- Tons of under the hood improvements
- Upstreamed to 3.18.140
- F2FS Support
- R29P0 GPU Backport from Exynos7870 Q source
- Improved sched tick rate
- GPU Overclocking / Voltage & Thermal control
- CPU Voltage Control And underclocking
- Devfreq Voltage control
- Compiler optimizations
- Many wakelocks blocked by default
- BoefflaWakelock Blocker
- WireGuard Support
- MoroSound control
- Magisk Support
- Aggressive samsung wakelocks block toggles
- Battery charger controls
- FadeLED Support
- DT2W / S2W / S2S Supported
- UKSM Module included
- Tuned SWAP rate
- Dynamic Fsync Driver
- PowerSuspend Driver
- PWM Flicker Free Mod by @Wootever
- Greatly improved scheduler and governor
- And many others that can be found on github
- Support for NFC and Smart Cases on Q
- Improved S9 interactive Governor
- Disabled GPU boosting little cores
- Disable DVFS fully
- Re-Tune samsung input booster
- Improved Magisk Hide
- Improved DVFS behaviour
- Reduced power consumption during video playback
- ZRAM with LZ4 Compression enabled by default
- GPU overclock upto 806mhz
- Massive patches and backports for Android Q
- CIFS Support
- Switchable SeLinux
- And much more
- ensure you have up-to-date TWRP (MoroTwrp Recommended or My TWRP).
- ensure you are running recent oreo bootloader and modem!
- Download and copy the ROM to your device
- Wipe everything (SYSTEM,DATA,CACHE,DALVIK and if possible internal storage)
- Flash the ROM.ZIP (Select only what you will use in bloat otherwise it will fail due to system size)
- Setup your rom and READ the F.A.Q for more information.
- After a full successful boot. you can flash Magisk if you need ROOT
- Follow the git repo to stay uptodate on bugs : Github
Imgur Album with Screenshots : IMGR | 2.5 Screenshots : IMGR
IF you helped in this rom and i forgot you, Send a PM or contact on Telegram
@corsicanu For a ton of support with this Project and a ton of HadesROM Features / Aroma (xoxo)
@kill-switch For Support and assistance with this ROM
@Khaled shabbar for 3rd party volume fix
@cvolton For fixing Device MAC Issues and 4K/60 FPS camera mod, and other contributions
@Ivan_Meler For help with fdsan
@morogoku & @pascua28 for help with kernels
@RickyBush_ For IOS Emoji
Thanks to the Testing Team for helping me greatly :-
@kill-switch @Morogoku @ModX81 @Khaled shabbar @Random-Tester @dave457 @Cvolton @Logan @Shariq3422 @MkUltraBlack
@RedLikeSnow @SnowFuhrer @nalasTS @Oto_16
@Sparta19666 @mathy007 @CANCAN_BBN @Kakashi82 @unibombz @Arcsin2
Downloads. Changelogs , F.A.Qs below
Contributors
ananjaser1211, corsicanu, kill-switch
Source Code: https://github.com/ananjaser1211/Cronos_8890/
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Bootloader/Modem and TWRP 3.3+
Based On: Android 10 - Oneui 2.5
Version Information
Status: Stable
Current Stable Version: V7.0
Created 2020-04-20
Last Updated 2022-07-01
Attachments
-
qLZrUk6.jpg1.8 MB · Views: 9,879
-
A1g8GeI.jpg699.6 KB · Views: 8,761
-
zb8XM9l.jpg509.4 KB · Views: 8,428
-
wABZkek.jpg1.6 MB · Views: 8,086
-
bHnINVK.jpg292.4 KB · Views: 7,759
-
55sWSTF.jpg87.7 KB · Views: 7,259
-
cjZ1PsX.jpg132.2 KB · Views: 7,057
-
rcpPBfc.jpg125.7 KB · Views: 7,142
-
F22vHEu.jpg117.9 KB · Views: 7,663
-
pOrecbd.jpg155.5 KB · Views: 8,575
Last edited: